• Journal of the Korean housing association
• /
• v.12 no.3
• /
• pp.109-116
• /
• 2001

Street is an important factor that street quality determines urban quality as the space of the high public nature in city. The research method considering sequence landscape is important because it is considered that the impression of such a street is formed by the wholeness of consecutive landscape and experience in moving street. Therefore, this study are pursued to structure the analysis of psychological evaluation and environmental attribute base on the physical characteristics of sequence landscape to supply the basic materials for seeking the national direction as qualitative improvement of urban street space and the attractive urban street space. Then the results are as follows. It is shown that the psychological evaluation structure of sequence landscape is evaluated by ornamental nature, intimacy, orderliness, openness and movability and that of environmental attributes is evaluated by four factors such as activity, intimacy, spatial attribute and openness.

• The Journal of the Korean dental association
• /
• v.57 no.7
• /
• pp.380-391
• /
• 2019

In recent years, with the introduction of various restorative materials, restorations using CAD/CAM equipment have been increasing in the esthetic dentistry. The critical steps in the fabrication of indirect restorations with CAD/CAM equipment are proper cavity preparation and making accurate impressions. The process of tooth preparation for CAD/CAM restoration should include a mechanical understanding of milling. In addition, during tooth preparation, the clinician should be familiar with additional equipment and techniques for obtaining the convenience. In order to obtain an accurate oral scan, the clinician should understand the limitations of the oral scan and be skilled at techniques for obtaining a successful image when making oral scans. This article focused clinical guidelines for the preparation of CAD/CAM restorations and introduced clinical methods for making successful impression of oral scans in narrow and deep tooth cavity areas.

• Journal of Technologic Dentistry
• /
• v.46 no.1
• /
• pp.15-19
• /
• 2024

An ideal post material should have physical properties similar to those of dentin. Post materials with high elastic moduli may cause root fractures. This clinical report describes the treatment of a severely damaged tooth using a recently introduced material. Polyetherketoneketone (PEKK) is a semicrystalline high-performance thermoplastic polymer. PEKK is a promising material for custom post-and-core fabrication because of its elasticity close to that of dentin, good shock absorbance, machinability, and low cost. A laboratory scanner was used to digitize the conventional impression of a severely damaged maxillary right first molar. A custom PEKK post-and-core was designed and milled using computer-aided design and computer-aided manufacturing technology. Using the proposed technique, a custom PEKK post-and-core was fabricated accurately and human error was reduced. Restoration was luted with resin cement. Custom PEKK post-and-core restorations are a viable alternative for treating severely damaged teeth.

• Imaging Science in Dentistry
• /
• v.30 no.1
• /
• pp.1-10
• /
• 2000

Purpose : 1. Retrospectively evaluate the accuracy of tentative diagnosis or impression from the clinico-radio-graphic materials of jaw lesions which showed mixed lesions associated with teeth. 2. To observe the diagnostic importance of the calcified part of the lesions which appear as radiopaque areas. Materials and Methods: 14 cases of jaw lesions which showed mixed lesions associated with teeth were reviewed. These lesions were mostly diagnosed as adenomatoid odontogenic tumors (6 cases) or calcifying odontogenic cysts with (4 cases) or without odontomas (4 cases). The calcified elements of the lesions which demonstrated various sizes and patterns of radiopaque shadows resembled odontoid tissues in some cases but could not be defined in some other cases radiographically. Results : The final histopathologic diagnosis confirmed adenomatoid odontogenic tumors in 4 of the 6 cases. The remaining 2 cases turned out to be odontoma and ameloblastic fibroodontoma. The 4 cases of calcifying odontogenic cysts with odontomas were correct in 3 cases but remaining 1 case was just odontoma. The 4 cases of calcifying odontogenic cysts were proved to be odontogenic keratocyst, calcified peripheral fibroma, unicystic ameloblastoma and squamous cell carcinoma. Conclusion : The diagnostic accuracy of the adenomatoid odontogenic tumors and calcifying odontogenic cysts were high when the lesions show typical appearance. The calcifications which show radiopaque areas could be odontomas or dystrophic calficifations or remnants of bone fragments from resorption.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.260-266
• /
• 2010

Today's consumers are looking for emotional design which can fulfill their own potential desire. Emotion varies according to individual circumstance, age, sex, culture, education, profession and so on. Automotive instrument panel design is the most important part of interior design, because it affects the impression of interior design and has the equipments for safety, entertainment and various information. Thus, this study was performed to apply emotional design to automotive instrument panel which is the most important part of automotive interior, and find the best bonding conditions to build instrument panel efficiently by comparing mechanical properties in thermoplastic resin of polyethylene (PE) adhesion. Satisfactory adhesion was executed in ultrasonic welding for the same materials of PE. The best welding conditions were found to be welding time of I second, welding pressure of 250 kPA for PE-PE welding. Dissimilar materials were adhered when adhesion and ultrasonic welding were performed at the same time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.6
• /
• pp.641-646
• /
• 2004

Statement of Problem. Temporary soft relining materials are used in a diverse clinical situations such as tissue conditioner, relining material, functional impression by varying its viscoelasticity. However, reproduction of consistent viscoelasticity has been not possible. Materials and methods. Considering setting mechanism of this material, this study has measured the effect of varying amount of void in dynamic viscoelasticity of soft relining material, with three different mixing methods. In each methods 10 specimens were made and subjected to dynamic viscoelastic test which were measured at specific times over period of 72 hours. Results. The analysis of the result shown that there was no statistically significant differences between different mixing methods. Conclusion. Different mixing methods had no effect over control of viscoelasticity of soft lining material. Further research is recommended for under similar oral environmental condition.

• The Journal of Korean Society for Radiation Therapy
• /
• v.7 no.1
• /
• pp.92-96
• /
• 1995

All patients who will Undergo irraidiation of the oral cavity cancer will need dental before and during Radiotherapy. The extent of the region and the presence of numerous critical normal tissues(mucosa, gingiva, teeth and the alveolar ridge, alveolar bony structure, etc) in the oral cavity area, injury to which could result in serious functional impairment. Therefore I evaluate the Usefulness of custom-made intraoral shielding device before and during Radiotherapy in oral cavity cancer. Materials and Methods(1) : Manufacture process of Custom-made intraoral shielding device Containing Cerroband. A. Acquisition of impression B. Matrix Constitution C. Separation by Separator D. Sprincle on method E. Trimming F. Spacing G. Fill with Cerroband Materials and Methods (2) A. Preannealing B. TLD Set up C. Annealing D. TLD Reading = Results = Therefore dosimetric characteristics in oral cavity by TLD Compared to isodose curve dose distribution Ipsilateral oral mucosa, Contralateral oral mucosa, alveolar ridge, tongue, dose was reduced by intraoral shielding device containning Cerroband technique Compard to isodose plan = Conclusions = The custom-made intra-oral shielding device containing Cerroband was useful in reducing the Contralateral oral mucosa dose and Volume irradiated.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.371-378
• /
• 1996

An RF inductively coupled plasma (ICP) torch has been developed as a typical thermal plasma generator and reactor. It has been applied to various materials processings such as plasma flash evaporation, thermal plasma CVD, plasma spraying, and plasma waste disposal. The RF ICP reactor has been generally operated under one atmospheric pressure. Lately the characteristics of low pressure RF ICP is attracting a great deal of attention in the field of plasma application. In our researches of RF plasma applications, low pressure RF ICP is mainly used. In many cases, the plasma generated by the ICP torch under low pressure seems to be rather capacitive, but high density ICP can be easily generated by our RF plasma torch with 3 turns coil and a suitable maching circuiit, using 13.56 MHz RF generator. Plasma surface modification (surface hardening by plasma nitriding and plasma carbo-nitriding), plasma synthesis of AIN, and plasma CVD of BN, B-C-N compound and diamond were practiced by using low pressure RF plasma, and the effects of negative and positive bias voltage impression to the substrate on surface modification and CVD were investigated in details. Only a part of the interesting results obtained is reported in this paper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.703-714
• /
• 2005

The purpose of this study is to acquire various methods for the fashion image coordination and to examine common features of variation of coordination methods according to the trend. It has attained by investigating Men's fashion image coordination through trend analysis in terms of its coordination features and its variety aspects. For this study, it has classified into twelve typical Men's fashion images in collecting 1,291 pieces of photographs on the subject of jackets and pants from Men's fashion collection$(1995\~2002)$. The study has examined methods and features of fashion image coordination by year according to design elements and the harmony between items. In addition, it has drawn common factors in the image coordination. The summary and conclusion are as follows. A year of 1995, it has presented as the essential code of the variation that morphologic aspects of a design in the fashion image coordination. Various designs have developed through the variation of shapes such as shoulder width, shoulder pad, jacket width and its length and so on. In the initial stage, the width of shoulder and jacket has fitted into large pattern and then adjusted elegantly to make fit the body that indicates a dissolution according to an avant-garde image. At the time that over-measurement of the shape has reduced and high quality and variation of materials has gradually become significant. Those are often used that high-quality glossy materials or other materials which are opposite to the basic code of the original fashion image materials and qualities regardless of images. On the pattern and color, in addition, have represented neat and elegant impression with moderate applications rather than quantitative abundance that have used opposite elements to the basic code f3r the change code like materials. Furthermore, before and after 1999, ' it shows that a concept of the total coordination has arisen that increased coordination methods to strengthen and affluent its images for the whole with wearing accessaries such as hats, gloves, sunglasses, mufflers, bags, belts and so on.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.4
• /
• pp.353-360
• /
• 2010

In this paper, an efficient algorithm is established in order to estimate the plastic properties of power-law hardening bulk specimen materials with one simple spherical indentation impression test. This work is based on a new formulation of representative strain and, therefore, compare to the preceding approaches the fitting parameters are significantly reduced. Moreover, the new definition of representative strain endowed more physical meaning to the representative strain. In order to verify the reliability of the reverse analysis, we have studied a broad set of materials whose property ranges cover essentially all engineering metals and alloys. Based on the indentation force-displacement P-${\delta}$ curves obtained from numerical simulations, the characteristics of the indentation response and material elastoplastic properties are bridged via explicit functions. Next, through the procedure of reverse analysis the yield stress and power-law hardening exponent of bulk specimen materials can be determined. Finally, good agreement between the result from reverse analysis and initial input data from experiment can be observed.