• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.299-306
• /
• 2020

PURPOSE. The aim of this study was to evaluate the accuracy of six recently introduced intraoral scanners (IOSs) for single crown preparations isolated from the complete arch, and to determine the effect of scanning sequence on accuracy. MATERIALS AND METHODS. A complete arch with right and left canine preparations for single crowns was used as a study model. The reference dataset was obtained by scanning the complete arch using a highly accurate industrial scanner (ATOS Core 80, GOM GmbH). Six different IOSs (Trios, iTero, Planmeca Emerald, Cerec Omnicam, Primescan, and Virtuo Vivo) were used to scan the model ten times each. The scans performed with each IOS were divided into two groups, based on whether the scanning sequence started from the right or left quadrant (n=5). The accuracy of digital impression was evaluated using three-dimensional analyzing software (Geomagic Studio 12, 3D Systems). The Kruskal Wallis and Mann- Whitney U statistical tests for trueness analysis and the One-way ANOVA test for precision analysis were performed (α=.05). RESULTS. The trueness and precision values were the lowest with the Primescan (25 and 10 ㎛), followed by Trios (40.5 and 11 ㎛), Omnicam (41.5 ㎛ and 18 ㎛), Virtuo Vivo (52 and 37 ㎛), iTero (70 and 12 ㎛) and Emerald (73.5 and 60 ㎛). Regarding trueness, iTero showed more deviation when scanning started from the right (P=.009). CONCLUSION. The accuracy of digital impressions varied depending on the IOS and scanning sequence used. Primescan had the highest accuracy, while Emerald showed the most deviation in accuracy for single crown preparations.

• 복식문화연구
• /
• 제13권5호
• /
• pp.804-818
• /
• 2005

The purpose of this study is to investigate the effect of tone-on-tone coloration on the visual images of traditional Korean dress. The materials in the experiment developed for this study were made up of various stimuli and the response scales for each stimulus. The stimuli were 48 color pictures with various combination of colors, in which the tones of jackets and skirts were manipulated by computer drawing. 24 bi-polar adjectives, each of which was graded into seven in its degree, were used to evaluate each image. The subjects were 576 female students in Jinju City. This experiment was based on the $3{\times}4{\times}4$ factorial designs: color (red, yellow and green), jacket tone (vivid, light, dull and dark) and skirt tone (vivid, light, dull and dark). The results of the study can be summarized as follows; Impression factor of the stimuli consisted of the 5 different dimensions - youthfullness and activity, attractiveness, gracefullness, visibility, and tenderness. The colors and the tone of jackets and skirts used in this experiment influenced 5 impression dimension by interaction of two valuables or working independently. Yellow and green with vivid or light tone had an effect on the formation of youth and activity image, and dark-light combination had an effect on the formation of attractiveness image. In case of green color, light tone of a jacket and vivid or dull tone of a skirt affected gracefulness, while yellow has no impact on visibility image regardless of skirt tone. Red and yellow with vivid or light tone were a factor to decide tenderness.

• 한국의류학회지
• /
• 제20권2호
• /
• pp.241-256
• /
• 1996

The purposee of this study was to identify the effect of perceiver's clothing attitude on male impressions created by the clothing cues and contexts. In addition, the effect of perceiver's evaluations of clothing appropriateness on male impressions. The subjects consisted of 256 male undergraduate students and 256 middle aged men. The experimental materials developed for this study were a set of stimuli and response scales. The stimuli were 8 color Photographs of drawings of a male figure in clothing which were minipulated in two levels, each of three clothing cues including type, style and color. The experimental design was full factorial design of 2(contexts$\times$clothing types$\times$clothing style$\times$clothing color). Each of the 16 sub-samples includes 16 subjects from the two perceiver group. Questionnaires used to measure perceivers responses to the stimuli were 7-point semantic differential scales composed of 37 bipolar adjectives representing personal traits. Four aspects of clothing attitude(fashion interest, status symbols consiousness, clothing conformity, practicality & comfort)were used to classify subjects into groups of 20 five-point likers type questionnaires adapted from the previous research. Clothing appropriateness were developed 5 point likest scales for evaluation of a stimulus person in each context. The data was processed by factor analysis, ANOVA, multiple classification analysis, Duncan's multiple range test, cluster analysis, MANOVA and pearson's product moment correlations. The major findings drawn from this study were as follows: 1. Perceiver's clothing attitude influenced impression formed by the social contexts and clothing crises. In three groups classified by their clothing attitude, the status symbol-oriented group was most affected by the social contexts and clothing cues. 2. Perceiver's evaluation of clothing appropriateness was related with impressions by a stimulus person. In summary the effect of contexts and clothing cues on impression formation varied according to perceiver's clothing attitude and clothing approopiateness.

• The Journal of Advanced Prosthodontics
• /
• 제11권3호
• /
• pp.155-161
• /
• 2019

PURPOSE. Although dental impression disinfection is determinant to reduce the cross-infection risk, some studies have shown that, in real practice, the disinfection procedures vary considerably. Thus, the aim of this study was to evaluate the antimicrobial effectiveness and the impact on the dimensional stability of addition silicone' impressions of water wash and the most clinically used disinfection solutions: 3% hydrogen peroxide, commercial disinfectant MD520 (Durr) and 1% and 5.25% sodium hypochlorite. MATERIALS AND METHODS. For this investigation, dental impressions were taken on 16 volunteer dental students. The antimicrobial effectiveness of each procedure was evaluated by pour plate method. The dimensional stability was evaluated using a standardized stainless-steel model, according to ANSI/ADA nº19 specification. RESULTS. The study results showed that water wash does not alter the dimensional stability of addition silicone impressions but doesn't reduce the microbial load of the material (P>.05). On the other hand, addition silicone disinfection by immersion with 3% hydrogen peroxide, MD520 (Durr), or sodium hypochlorite at 1% and 5.25% does not alter the dimensional stability significantly but reduces > 99.9% of the microbial load of the impressions (P<.001). CONCLUSION. Addition silicone impressions should always be disinfected after water wash in order to reduce effectively the cross-infection risk. All disinfectants tested showed high antimicrobial efficiency without significant changes in three-dimensional shape of impressions. Hydrogen peroxide and sodium hypochlorite are of particular importance because are easily accessible in dental setting. The less explored hydrogen peroxide could be a valuable alternative for silicone impressions disinfection.

• The Journal of Advanced Prosthodontics
• /
• 제15권6호
• /
• pp.290-301
• /
• 2023

PURPOSE. The study aimed to determine the influence of implant angulation on the trueness of multi-unit implant impressions taken through different techniques and strategies. MATERIALS AND METHODS. As reference models, three partially edentulous mandibular models (Model 1: No angulation; Model 2: No angulation for #33, 15-degree distal angulation for #35 and #37; Model 3: No angulation for #33, 25-degree distal angulation for #35 and #37) were created by modifying the angulations of implant analogues. Using a lab scanner, these reference models were scanned. The obtained data were preserved and utilized as virtual references. Three intraoral scanning (IOS) strategies: IOS-Omnicam, ISO-Quadrant, and IOS-Consecutive, as well as two traaditional techniques: splinted open tray (OT) and closed tray (CT), were used to create impressions from each reference model. The best-fit alignment approach was used to sequentially superimpose the reference and test scan data. Computations and statistical analysis of angular (AD), linear (LD), and 3D deviations (RMS) were performed. RESULTS. Model type, impression technique, as well as interaction factor, all demonstrated a significant influence on AD and LD values for all implant locations (P < .05). The Model 1 and SOT techniques displayed the lowest mean AD and LD values across all implant locations. When considering interaction factors, CT-Model 3 and SOT-Model 1 exhibited the highest and lowest mean AD and LD values, respectively. Model type, impression technique, and interaction factor all revealed significant effects on RMS values (P ≤ .001). CT-Model 3 and SOT-Model 1 presented the highest and lowest mean RMS values, respectively. CONCLUSION. Splinted-OT and IOS-Omnicam are recommended for multi-unit implant impressions to enhance trueness, potentially benefiting subsequent manufacturing stages.

• 대한심미치과학회지
• /
• 제13권2호
• /
• pp.13-24
• /
• 2004

In everyday dental practice, one of the most important procedures is fixed prosthodontics which includes gold and ceramic restorative treatments. This procedure can be divided into tooth preparation, impression taking, laboratory work, occlusal adjustment and cementation. The first step is tooth preparation and it needs not only good techniques but also deep knowledge and understanding of oral biology. Also, there must be good knowledge of the principles and materials of the procedure. The patient's satisfaction can be achieved from natural contour, good shade, and precise margin fit, especially in ceramic restorations on anterior regions. It is essential to fastidiously prepare the tooth to make aesthetic restorations with a good margin fit. Tooth preparation techniques and three case reports of ceramic restorations on the anterior region are presented and discussed in this paper.

• 대한조선학회지
• /
• 제9권1호
• /
• pp.21-31
• /
• 1972

When one speaks of a concrete ship, most people have an impression of heavy solid rough edged masses of concrete very unlike anything floatable. In the form represented by what is called "MRC", concrete does, however, become light, homogeneous, elastic, resilient, and above all strong still retaining the basic benefit of inexpensive well known concrete properties. The fundamental principal behind this material as a new shipbuilding material is based on the development of "ferro-cement" in the early 1940s by an Italian Engineer Pierre Luigi-Nervi. The "MRC" or Mesh Reinforced Cement has been studied by Korea institute of Science and Technology in connection with a research project "The Small Ship Construction Utilizing Domestic Materials And Its Economic Analysis," of which reports have been issued previously. In this exporsition, some of the basic qualities of "MRC" are discussed in general terms.

• 연구논문집
• /
• 통권32호
• /
• pp.15-22
• /
• 2002

In offset or intaglio printing machine, it's operated with combination of blanket cylinder and impression cylinder. The blanket cylinder has some number of grooves to attach the blanket on surface. In case of operating the printing machine, it has generate mechanical impact noise when the two cylinders encounter with the grooves. So, in this study, we developed a printing pressure control algorithm with hydraulic servo control system. We also proposed simulation model of experimental device to analysis the throw on force response of hydraulic servo actuator. Finally, we have reduced the mechanical impact noise and improved printing quality with a groove detecting signal and PI control of hydraulic servo actuator.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.805-816
• /
• 2008

The present work reviews the methods to evaluate elastic-plastic material characteristics by indentation tests. Especially the representative stress and strain values used in some papers are critically analyzed. The values should not only represent the load-depth curve, but also represent the whole of deformed material around the impression. We briefly introduce other indentation techniques to evaluate residual stresses, creep properties, and fracture toughness. We also review some technical problems that are related to the accuracy issues in indentation tests.

• 대한치과의사협회지
• /
• 제56권6호
• /
• pp.339-347
• /
• 2018

Conventional mouthguard fabrication process which consists of elastomeric impression taking and followed gypsum model making is changing into intraoral scanning and dental model printing with 3D printer. In addition, new 3D printing materials for mouthgurad, 3D Computer-Aided Design(CAD) software for dental appliance, evaluation of a virtual dentoalveolar model for testing virtually 3D designed mouthguard, and lightweight sensor technology will lead dental professionals to the new era of Sports Dentistry, including information technology integrated custom mouthguard fabrication and creating value with analytic data acquired from sensors in mouthguard.