• Journal of Chest Surgery
• /
• 제6권1호
• /
• pp.15-22
• /
• 1973

The definition of cancer, its diagnosis and its prognosis all depend upon description of growth. To the layman a synonym for cancer is a "growth". There are no quantitative terms for the description of growth or growth rate in clinical use. There has been no attempt to assign values that would define "rapidly" or "slowly" growing. Estimates of growth potentiality are implied in the descriptive phrases "poorly differentiated" or "well differentiated", "highly malignant" or "low grade malignancy". and in systems of grading. These qualifying terms represent a personal impression, clinically useful in prognosis, but relative in nature. They do not lend themselves to uniform application or precise measurement for purpose of comparison. Growth is related to size and time. The volume of tumor depends upon the duration of the period of growth and the rate of growth. If the interval and change in volume are known. the average growth rate can be determined. If the growth rate is determined, and assumed to be constant., the duration of a given tumor and the time of inception can be estimated. The commonest concept of the origin of cancer is that as a result of a mutation involving a single cell, succeeding divisions of cells establish a colony with the characteristics recognizable as cancer. If the growth rate of the hypothetical tumor were constant it could be described in terms of "tumor volume doubling time". In the department of thoracic surgery of St. Mary hospital in Catholic Medical College, a clinical evaluation for the growth rate, degree of malignancy, resectability and prognosis was done on a total 24 cases of primary bronchogenic carcinoma which contour was significant on the chest X-ray film as possible estimating the tumor volume doubling time. The following results were obtained: 1. In the cases of 6.0cm or more in diameter of minor size at operation the resectability rate was lower and in the cases of 60 days or more in the tumor or volume doubling time the resectability rate was higher. 2. If differentiation of cancer cells was lower graded in tissue pathology, the tumor volume was shorter and the resectability rate was lower. 3. The tumor volume doubling time of the primary bronchogenic carcinoma occured more over 60 years of age was slightly shorter than under 60 years of age. 4. The tumor size at operation was more important to evaluate the survival time and prognosis than the tumor volume doubling time because the tumor growth was not always constant, we presume.mor volume doubling time because the tumor growth was not always constant, we presume.

• 대한지역사회영양학회지
• /
• 제11권5호
• /
• pp.650-660
• /
• 2006

Recently, according to increase in production of pond snails resulting from the widespread organic farming, organic farmers are showing a lot of interests in the promotion of consumption and extending the market of pond snails. This study was performed to suggest the process of product development of the ready-to-eat pond-snail Mandu as a health food, to show the results of market test of the pilot product, and to investigate the change of the sensory characteristics during storage periods. For the market test of pond-snail Mandu, the survey was developed and delivered to consumers. The questionnaire consisted of 3 parts such as respondents demographic characteristics, customer's perception of pond-snail Mandu before tasting, and customer's perception of that after tasting. And the market test was carried out with university students, welfare institution residents and apartment residents in the Seoul and Gyeonggi areas. As a result of the test, the most important purchasing factors were determined in the order of taste (49.5%), hygienic quality (12.5%), nutritional value (10%) and price (9%). And only 4.2% of respondents selected brand name as an important purchasing factor. After tasting pond-snail Mandu, consumers had suggested the better taste (t=6.986, p<0.000) and price (t=2.082, p<0.05) than those of before tasting. In response to favorable impression of pond-snail Mandu, 54.5% of total respondents evaluated positively. The favorable impressions came from iron-rich Mandu (27.6%), high protein and nutritious Mandu (24.4%), calcium-rich Mandu (17.9%), diet Mandu (13.3%), and delicious Mandu (12.5%) respectively. Sensory characteristics of pond-snail Mandu were evaluated by professional panels in terms of the softness of Mandu skin, chewiness, moistness, toothpacking, color, aroma, saltiness, and degree of plain, taste, and aftertaste. The evaluation of sensory characteristics on a 7-point scale, showed that softness of mandu skin (4.44) and aftertaste (4.11) got a low scores. The statistical difference of the tastes (p>0.05) was not founded by storage period of 7, 14, 21 and 28 days. Based on the result, the improvement of these characteristics are desired in developing the pond-snail Mandu. Research method applied to this study can be useful for developing a new product.

• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.61-78
• /
• 1997

PDGF-BB has been recognized as a highly potential growth factor for guided tissue regeneration in periodontal defect. This study carried out histologic and histometric evaluation of $200ng/cm^2$ PDGF-BB loaded bioresorbable membrane made from polyglycolic and polylactic acid. It was tested for its biocompatibility, ability to prevent epithelial downgrowth and amount of periodontal regeneration. Without membrane and PDGF-BB unloaded bioresorbable membrane were used as control. Healthy six beagle dogs were used. Each dog was anesthetized and buccal flaps were reflected in the mandibular and maxillary premolar areas. Buccal alveolar bone between the mesiobuccal and distobuccal line angles was surgically removed on the lower 2nd and 4th premolar in mandible, 2nd premolar in maxilla, to a level 4mm apical to the cementoenamel junction with creating a Class II buccal furcation defect for available space. Care was taken not to remove the root cementum layer and rubber impression materials were placed over each surgically created defect. Flaps were repositioned and sutured. Reconstructive surgery was performed 1 month after defect preparation. PDGF-BB loaded membranes and controls were randomly placed on maxillary 2nd premolars and mandibular 2nd and 4th premolars. Plaque control regimen was instituted with daily brushing with a 0.1% chlorhexidine digluconate during experimental periods. The animals were sacrificed 2 and 5 weeks after surgery and undecalcified specimens were prepared for histologic evaluation. The degree of coronal regrowth of new bone, new cementum and the amonut of new bone areas formed on the defected area of the PDGF-BB loaded membrnae turned superior to without membrane and drug unloaded membrane. Experimental membrane could prevent the epithelial downgrowth irrespective of drug loaded or not and showed good biocompatiblity, These results implicated that PDGF-BB loaded bioresorbable membrane could be highly useful tool for guided tissue regeneration of periodontal defects.

• 한국임상수의학회지
• /
• 제30권3호
• /
• pp.214-217
• /
• 2013

3세령의 암컷 고슴도치(Atelerix albiventris)가 심하게 종대된 하악 병변의 평가를 위해 내원하였다. 세포학적 검사를 위해 세침흡인을 실시하였으며, 도말표본을 제작 후 로마노프스키식 염색으로 염색하였다. 세포학적 검사에서 원형을 포함한 다양한 모양의 편평상피세포가 주로 관찰되었으며, 일부 세포는 유사 방추 모양 또는 매우 길쭉한 모양을 띄고 있었다. 세포학적 소견은 편평상피암종이었으며, 조직검사를 위해 수술적으로 제거하였다. 조직병리상 악성 편평상피암종세포들이 중등도의 콜라겐과 방추형 섬유모세포로 이루어진 간질에 둘러싸여 있었으며, 인접한 골격근과 골조직으로의 침습이 관찰되었다. 종양세포는 중등도의 세포 대소부동과 핵 대소부동을 보였으며, 중등도 이상의 각화상태를 보였다. 종양의 중심부에서는 극세포해리가 있었으며 림프형질세포 및 호중구성 염증소견이 동반되었다. 유사 분열상은 고배율에서 2-3개가 관찰되었다. 이와 같은 소견에 기초해서 편평상피암종으로 진단하였으며, 보호자는 종괴의 수술적 제거 후 더이상의 치료를 원치 않아 바로 퇴원하였다. 환자는 추가 처치 없이 3개월 생존 후 폐사하였다.

• Tuberculosis and Respiratory Diseases
• /
• 제83권1호
• /
• pp.31-41
• /
• 2020

Background: Chronic cough is defined as a cough lasting more than 8 weeks and socio-economic burden of chronic cough is enormous. The characteristics of chronic cough in Korea are not well understood. The Korean Academy of Tuberculosis and Respiratory Diseases (KATRD) published guidelines on cough management in 2014. The current study evaluated the clinical characteristics of chronic cough in Korea and the efficacy of the KATRD guidelines. Methods: This was a multi-center, retrospective observational study conducted in Korea. The participants were over 18 years of age. They had coughs lasting more than 8 weeks. Subjects with current pulmonary diseases, smokers, exsmokers with more than 10 pack-years or who quit within the past 1 year, pregnant women, and users of cough-inducing medications were excluded. Evaluation and management of cough followed the KATRD cough-management guidelines. Results: Participants with chronic cough in Korea showed age in the late forties and cough duration of more than 1 year. Upper airway cough syndrome was the most common cause of cough, followed by cough-variant asthma (CVA). Gastro-esophageal reflux diseases and eosinophilic bronchitis were less frequently observed. Following the KATRD cough-management guidelines, 91.2% of the subjects improved after 4 weeks of treatment. Responders were younger, had a longer duration of cough, and an initial impression of CVA. In univariate and multivariate analyses, an initial impression of CVA was the only factor related to better treatment response. Conclusion: The causes of chronic cough in Korea differed from those reported in other countries. The current Korean guidelines proved efficient for treating Korean patients with chronic cough.

• 한국조경학회지
• /
• 제36권3호
• /
• pp.75-84
• /
• 2008

본 연구는 경관이 발생하는 조망점에서 체험되는 시각특성과 그 조망점에서의 경관체헝을 극적으로 이끄는 지리 구조를 양산시에 소재하고 있는 산지 경관의 사례 연구를 통하여 밝현 것이며, 그 결과는 다음과 같다. 양산시 소재 6개의 산을 대상으로 그 산을 체험할 수 있는 조망점을 40개소 선정하였다. 이들 조망점에서 파악된 산지경관 조망점에서 조망대상이 중거리역에 주로 분포하고 있으며, 시각크기는 산과 대변하는 느낌을 주는 앙각 11${\sim}13^{\circ}$, 시야 전체를 차지하고 광대한 인상을 주는 수평각 50${\sim}90^{\circ}$라는 것을 알 수 있었다. 양산시에서는 도시민이 산의 느낄 수 있는 거리대에서 대면적 관계로 산지경관을 지각하고 있다. 이어서 인상적인 경관체험을 유발하는 조망점의 지리 구조를 8개 의 유형으로 분류하였으며, 그 특성을 고찰하였다. 산이 건물이나 길가의 수목 등의 주변 환경이 만들어낸 좁고 긴 선형의 공간을 형성하는 회랑형이 7개소, 또 산을 교량 또는 고가도로의 하부나 터널을 지날 때 가려졌던 시야와 빛이 열리면서 체험하게 되는 터널형이 2개 소, 산세를 따라 굽이지는 길의 마지막에 나타나는 미로형이 4개소, 교차로에서 방향을 전환하거나 건물이나 산자락을 끼고 돌 때 동선방향이 바뀌는 순간 나타나는 모롱이형이 8개소, 오르막 경사의 마루에서 나타나는 고개마루형이 3개소, 산이 관찰자와 같은 진행방향으로 길게 누워져 있을 때 차창에 지속적으로 나타나는 평행형이 4개소, 고립되어 있는 산파 형태인 대변형이 5개소, 마을, 도시 등의 지역 경제나 교량, 광장과 같은 주요 지점을 지날 때 나타났다. 산지 경관이 인상적으로 체험되기 위해서는 조망점뿐 아니라 그곳으로 다가가는 지리구조도 아울러 중요하다는 것을 확인하였다. 본 연구의 성과는 산지경관의 관리 및 보존과 경관자원도 등 경관영향평가의 기초자료를 수집하는 기초 자료가 될 것이다. 또 경관도로의 정비 등에도 응용할 수 있을 것으로 기대한다.

• 환경영향평가
• /
• 제4권3호
• /
• pp.9-13
• /
• 1995

In July 1993 a new prescription of the EC was finished, concerning the voluntary participation of enterprises in a common auditing system. By this in the EC-member countries there must be founded centers of environmental auditing where experienced experts of environmental auditing should be accredited. These accredited experts are controllers for evaluating and certification of carried out environmental-auditings. An environmental-auditing practically represents an environmental assessment for an already existing enterprise with establishing corresponding programmes and strategies for the internal management to improve the environmental relations. Much experiences, which could be collected in the field of EIA during the last years may be transfered to this new task immediately. Only an essential difference there should not be overseen because of national legislation EIA in the defined cases must be carried out. By the EC-prescription carrying out an environmental-auditing for an enterprise is optional, it is recommended only. It was not introduced as a must. In spite of this fact because of the hard competition on the market there will be developed a pressure for the enterprises, to carry out such environmental-auditings. At present already a number of first projects in this direction can be seen, in the first line above all enterprises with the necessary economic power want to use this possibility, to gain better positions on the market. We have already gathered the first experiences in this field. We arranged corresponding contacts to several enterprises within the surroundings of Dresden. Within an opening discussion, where the project is explained and discussed with the management of the enterprise very detailed, the understanding, the readiness and the cooperation for the project are generated necessary prerequesits for the success of the whole work. By means of careful detail-work in collaboration with all departments and on all levels of the enterprise the total mass and energy-balances of the factory established and analysed. There are included also such ranges like material delivery, personal policy, public relations and sale as well as waste management. It is important that all people working in the factory have the feeling to be our partners, and not to have the impression to be checked or controled by an outside organization. This one of the most important factors of environmental auditing, in order to wake up and to develop a common interest on all sides. At the end of the environmental auditing there will be according to the prescription of the EC a catalogue of measures to do immediately, short time, mean time and long time for improvement of the environmental situation of the enterprise. All proposals are made in connection with a corresponding economic evaluation. These measures and programmes are declared as the environmental manual and are the basis for the work of the environmental management of the enterprise for the next three years. According to the EC-prescription, the enterprise with this environmental manual can get a corresponding certificate, which may be used for public relation purposes.

• The Journal of Advanced Prosthodontics
• /
• 제9권3호
• /
• pp.176-181
• /
• 2017

PURPOSE. The purpose of this study was to evaluate the marginal and internal gaps of Ni-Cr and Co-Cr copings, fabricated using the dental ${\mu}-SLA$ system. MATERIALS AND METHODS. Ten study dies were made using a two-step silicone impression with a dental stone (type IV) from the master die of a tooth. Ni-Cr (NC group) and Co-Cr (CC group) alloy copings were designed using a dental scanner, CAD software, resin coping, and casting process. In addition, 10 Ni-Cr alloy copings were manufactured using the lost-wax technique (LW group). The marginal and internal gaps in the 3 groups were measured using a digital microscope ($160{\times}$) with the silicone replica technique, and the obtained data were analyzed using the non-parametric Kruskal-Wallis H test. Post-hoc comparisons were performed using Bonferroni-corrected Mann-Whitney U tests (${\alpha}=.05$). RESULTS. The mean (${\pm}$ standard deviation) values of the marginal, chamfer, axial wall, and occlusal gaps in the 3 groups were as follows: $81.5{\pm}73.8$, $98.1{\pm}76.1$, $87.1{\pm}44.8$, and $146.8{\pm}78.7{\mu}m$ in the LW group; $76.8{\pm}48.0$, $141.7{\pm}57.1$, $80.7{\pm}47.5$, and $194.69{\pm}63.8{\mu}m$ in the NC group; and $124.2{\pm}52.0$, $199.5{\pm}71.0$, $67.1{\pm}37.6$, and $244.5{\pm}58.9{\mu}m$ in the CC group. CONCLUSION. The marginal gap in the LW and NC groups were clinically acceptable. Further improvement is needed for CC group to be used clinical practice.

• 대한치과보철학회지
• /
• 제54권3호
• /
• pp.210-217
• /
• 2016

목적: 본 연구의 목적은 실제 환자에서 디지털 구강스캐너로 모형 없이 제작한 보철물의 변연 및 내면 적합도를 평가하는 것이다. 대상 및 방법: 전향적 임상시험으로 시행한 본 예비 연구는 총 11개의 수복물을 대상으로 하였다. 구강스캐너(TRIOS, 3shape, Copenhagen, Denmark)로 디지털 구강인상을 채득한 후, 캐드 디자인 및 밀링 가공 과정을 통해 전부지르코니아 수복물을 제작하였다. 완성된 지르코니아관을 환자 구강 내에 시적하였고, 레플리카 술식으로 보철물-지대치 복제물을 얻었다. 이를 근원심, 협설 방향으로 잘라 변연오차, 변연간극과 축벽부, 선각부, 교합면부의 내면간극을 측정하였다. 통계처리는 Kruskal-Wallis 검정과 Mann-Whitney U 검정을 이용하여 통계적 유의성을 분석하였다(${\alpha}=.05$). 결과: 복제물을 통한 적합도 분석 결과, 근원심, 협설 절편 사이에는 통계적으로 유의한 차이가 없었다(P>.05). 변연간극에 불일치가 있었으며, 변연 오차가 변연간극 보다 컸다(P<.01). 결론: 본 연구의 한계 내에서, 구강스캐너로 모형 없이 제작한 전부지르코니아 수복물의 적합도는 임상적으로 허용할만한 결과를 보였다. 그러나 지르코니아관의 변연부위가 과풍융되는 경향이 있었으므로 주의 깊은 임상 적용 및 추적 연구가 요구된다.

• 구강회복응용과학지
• /
• 제34권2호
• /
• pp.104-115
• /
• 2018

목적: 본 연구는 현재 시판되고 있는 구강스캐너를 사용하여 구강스캐너 정확도 평가를 위해 국제표준이 제안하고 있는 모형의 스캔이미지 획득이 가능한 지 분석하고, 이를 통해 표준모델이 가지고 있는 문제점을 파악하는 데 있다. 연구 재료 및 방법: ISO12836과 ANSI/ADA no.132에서 규정하는 국제표준을 참고하여 3D 프린터기를 이용하여 모델을 제작하였으며, 모델스캐너와 두 가지 구강스캐너를 이용하여 스캔을 하였다. 스캔이미지 획득 정도를 3등급으로 분류하여 스캐너의 성능을 비교하였으며, 모델 표면의 상태에 따른 이미지 획득 능력도 비교하였다. 결과: 모델 스캐너가 모든 모델에서 가장 우수한 이미지를 얻을 수 있었으며 TRIOS3는 둥근 형태의 구조물, CS3500은 각진 형태의 구조물에 대한 이미지 재현이 좋은 결과를 보였다. 표준 모델의 표면상태에 따른 스캔이미지 재현에서는 초경석고 모델이 스캐너 종류와 관계없이 가장 우수하였다. 3D 프린팅 모델의 경우, 표면에 파우더 처리를 한 모델에서 가장 우수한 스캔이미지를 얻을 수 있었다. 결론: ISO12836과 ANSI/ADA 132의 표준모델의 경우, 구강스캐너의 field of view (FOV)를 벗어나는 구조물을 스캔할 때 서로 다른 면인 것을 구분하는 기준점이 존재하지 않게 되면 연속적인 스캔 및 정합과정에서 정확한 이미지를 나타내지 못한다는 것을 알 수 있었다. 그러므로 단순한 패턴의 반복과 대칭구조를 가지지 않는 새로운 표준모델이 필요하다고 여겨진다.