• 대한안전경영과학회지
• /
• 제14권2호
• /
• pp.147-158
• /
• 2012

This paper aims to develop a new chain metrics for obtaining lean Overall Equipment Effectiveness(OEE) and present implementation strategy which considers the properties for Total Productive Maintenance(TPM) to reduce machine losses, Performance Analysis and Control(PAC) to reduce labor losses, Lean Production System(LPS) to reduce floor wastes, and Theory of Constraints(TOC) to minimize the problem of Capacity Constrained Resource(CCR). The study reviews the related literatures and reformulates the structure of machine losses, labor losses and field wastes. The research also develops the integrated productivity metrics according to time, units, reliability and maintainability. It is found that the study develops the actual productivity measure in terms of efficiency, effectiveness and standard productivity. In addition to that, it outlines and develops by using the integrated LPS and TPM, lean OEE measures such as Time Based Productivity(TBP), Unit Based Productivity(UBP), and Reliability & Maintainability Based Availability(RMBA). Implication examples are proposed to make it easier and available for practioners to understand the implementation strategies about TPM OEE, lean OEE and TOC OEE. Futhermore related to other studies, the research contributes to create a new chain productivity measures to clear the interrelationship concepts of productivity, efficiency and effectiveness. Moreover the paper develops the enhanced OEE measures by integration of TPM, PAC, LPS and TOC with the perspective of schedule, throughput, reliability, maintainability and availability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.332-335
• /
• 1990

There are several methods in controlling resonant converters to regulate the output with low switching losses. In this paper, Pulse-width modulation method or current controlled method is applied to regulate the output with low switching losses. In digital implementation of resonant converter systems, the speed of the applied processor is very critical since the switching frequency is very high. Thus the various possible candidates of microprocessors are evaluated for the implementation of resonant converter systems. Then too design methods and techniques are desioribed when single chip processor is used to simplify hardware requirements.

• International Journal of Computer Science & Network Security
• /
• 제21권5호
• /
• pp.57-68
• /
• 2021

Successfully adapting to digital and customer-oriented transformation, the concept of lean manufacturing professes the philosophy of creating greater benefit while minimizing losses. These losses are operations that do not add value in the production process to ensure the efficiency, flexibility, and profitability of projects. In the context of broad automation and digitalization of all sectors of the economy, mechanisms for combining automation technologies and lean production are becoming available. Moreover, when it comes to the efficient use of financial, human, or material resources, it is clear that the use of Industry 4.0 technologies can be an effective tool for achieving the goals of lean production, as many of them pursue the same goal. In this context, this article aims to study the effectiveness of the implementation of project management concepts at the global level and identify the main factors influencing its effectiveness to ensure the achievement of lean production through LEAN technologies and Industry 4.0 technologies. To achieve this goal, several statistical indicators were selected and several statistical methods of analysis were used: pairwise correlation, regression analysis, methods of comparison, synthesis, and generalization. Statistical analysis was conducted according to a survey conducted by the Project Management Institute (PMI) in 2020. An economic-mathematical model of dependence of project effectiveness in different regions of the world on the level of implementation of project management approaches is built, which shows that the increase in project effectiveness by 85% is due to financial losses, technical training, and consumer orientation. These results allow project managers to develop appropriate strategies to improve project management approaches at all levels. It is established that LEAN technologies and technologies of Industry 4.0 have several tools that have a positive effect on minimizing losses following the concept of lean production. Besides, given that the technology of Industry 4.0 is focused on the automation of Lean Production technology, a mechanism for the introduction of lean production using these technologies and methods.

• ETRI Journal
• /
• 제25권1호
• /
• pp.19-24
• /
• 2003

This paper describes the performance of a Ku-band 5-bit monolithic phase shifter with metal semiconductor field effect transistor (MESFET) switches and the implementation of a ceramic packaged phase shifter for phase array antennas. Using compensation resistors reduced the insertion loss variation of the phase shifter. Measurement of the 5-bit phase shifter with a monolithic microwave integrated circuit demonstrated a phase error of less than $7.5{\circ}$ root-mean-square (RMS) and an insertion loss variation of less than 0.9 dB RMS for 13 to 15 GHz. For all 32 states of the developed 5-bit phase shifter, the insertion losses were $8.2{\pm}1.4$dB, the input return losses were higher than 7.7 dB, and the output return losses were higher than 6.8 dB for 13 to 15 GHz. The chip size of the 5- bit monolithic phase shifter with a digital circuit for controlling all five bits was 2.35 mm ${\times}$1.65 mm. The packaged phase shifter demonstrated a phase error of less than $11.3{\circ}$ RMS, measured insertion losses of 12.2 ${\pm}$2.2 dB, and an insertion loss variation of 1.0 dB RMS for 13 to 15 GHz. For all 32 states, the input return losses were higher than 5.0 dB and the output return losses were higher than 6.2 dB for 13 to 15 GHz. The size of the packaged phase shifter was 7.20 mm${\times}$ 6.20 mm.

• 대한기계학회논문집B
• /
• 제29권7호
• /
• pp.820-827
• /
• 2005

Development of an engine with good fuel economy is very important for successful implementation of long endurance miniature UAVs (unmanned aerial vehicles). In the study, a 4-stroke glow-plug engine was modified to a gasoline-fueled spark-ignition engine. Engine tests measuring performance and friction losses were conducted to tune a simulation program for performance prediction. It has been found that excessive friction losses are caused by insufficient lubrication at high speeds. The simulation program predicts that engine power and fuel economy get worse with high altitude due to increasing portion of friction losses. The simulation results suggest quantitative guidelines for further development of a practical engine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1111-1113
• /
• 1998

A robust economic dispatch algorithm involving transmission losses is proposed and investigated for a possibility of on-line applications. In this paper, the penalty factors are calculated directly from transposed Jacobian of load flow analysis with advantages of superiority to B-coefficients method based on its computation time and suitability for real time application since the approach is based on a current system condition. The proposed algorithm is systematically handling the generation capacity constraints with transmission losses. Implementation of the algorithm for IEEE systems and EPRI Scenario systems shows that computation time is enough to apply on-line economic dispatch to large power system and production cost is saved compared with the crude classical economic dispatch algorithm without considering transmission losses.

• 한국전자통신학회논문지
• /
• 제8권7호
• /
• pp.1003-1010
• /
• 2013

본 연구에서는 데이터통신을 사용하기 위하여 기계간의 통신을 기초로 한 TCP/IP는 CDMA/GSM을 사용한다. 이 통신방식은 근해정박부이에서는 시스템 서버에 데이터 백업을 위하여 광법위하게 사용된다. 기후나 신호적용범위 때문에 TCP/IP M2M 통신방식은 종종 데이터 전송이 실패하거나 서버에서의 데이터손실을 유발한다. 해양통신이나 기상학적인 해석을 위해서는 데이터 손실을 줄여야 한다. 본 연구에서는 데이터 전달 손실을 최소화하고 데이터복구에서 사용되는 재시도를 위하여 M2M 데이터손실을 최소화하는 소프트웨어방식을 연구하였다. 이 연구의 유용성을 입증하기 위하여 근해에 위치하는 기상용 부이에서 통신을 이용하여 연구의 유용성을 보여주었다.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권8호
• /
• pp.145-155
• /
• 2022

Since 2014, the IFRS 9 has been the focus of the attention of many scholars across disciplines. The futuristic prediction of bank loan provision via a flexible ECL model has been observed as a game changer from the prior models offered in IAS 39. This study has two objectives; the first is to examine the impact on loan loss provisions (LLP), nonperforming loans (NPL), and the impairment loan losses (ILL) after the IFRS 9 in gulf banks. The second is to capture any variation in LLP, NPL, and ILL before and after IFRS9. The study used the two-way fixed effect model (TWFE) estimation and the DiD approach to attain its objectives. 54 gulf banks were selected from the periods between 2012 and 2020. The results indicate that LLP has significantly increased after the transition to IFRS 9, while the NPL has significantly decreased. The results did not capture a significant change in ILL after IFRS9 implementation. The results also indicate more consistency in LLP and NPL reporting after implementing the ECL model adopted in IFRS9. The study concluded that ECL model outcomes are in tandem with prior observation worldwide and pointed out some improvement opportunities for the future.

• 한국축산식품학회지
• /
• 제38권3호
• /
• pp.498-505
• /
• 2018

This study was aimed to investigate the effects of the type O foot-and-mouse disease vaccine (FMDV) on the incidence of abnormal meat such as granuloma or abscess formation at the injection site in pork and its associated economic losses. At 56 d of age, piglets were inoculated with FMDV by one of three administration routes: N-Neck (a conventional needle-syringe injection into the neck), N-Ham (a conventional needle-syringe injection into the ham), and Non-Neck (injection with a needle-free device into the neck). The injection sites were visually examined for the presence of a granuloma or abscess, and the incidence rate of abnormal meat was calculated. The gross weight of the portion of the pork carcasses condemned because of granuloma or abscess formation was measured and multiplied by the weekly sales price to calculate the total economic losses. After implementation of FMDV, the economic losses were approximately six times higher than before implementation. Granuloma or abscess formation was significantly higher in the N-Neck and Non-Neck groups, in which the vaccine was inoculated into the neck area, than in the N-Ham group (N-Neck and N-Ham vs Non-Neck, p<0.05). These results suggest that the incidence of lesions could be reduced if the ham route was used for vaccination.

• KDI Journal of Economic Policy
• /
• 제35권3호
• /
• pp.1-38
• /
• 2013

본 연구는 공공부문과 민간투자사업자를 포함한 일반균형모형을 사용하여 재정사업과 BTL 민간투자사업의 후생 차이를 비교 분석한다. 다른 모든 조건이 동일할 때 정부가 세입 세출을 동일하게 유지해야 한다고 가정할 경우, 민간투자사업하에서의 국민경제 후생수준이 재정사업하에서의 후생수준보다 높은 것으로 나타난다. 정부가 균형재정의 제약을 회피할 목적으로 민간투자사업을 무리하게 추진하는 경우 미래의 임대료가 모두 부채로 간주되기 때문에 상당한 사회적 비용이 초래될 수 있음을 명시적으로 보인다.