• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1861-1868
• /
• 2008

In this paper, Passive Telemerty RF Sensor System using Unscented Kalman Filter algorithm(UKF) is proposed. General Passive Telemerty RF Sensor System means that it should be "wireless", "implantable" and "batterless". Conventional Passive Telemerty RF Sensor System adopts Integrated Circuit type, but there are defects like complexity of structure and limit of large power consumption in some cases. In order to overcome these kinds of faults, Passive Telemetry RF Sensor System based on inductive coupling principle is proposed in this paper. Because passive components R, L, C have stray parameters in the range of high frequency such as about 200[KHz] used in this paper, Passive Telemetry RF Sensor System considering stray parameters has to be derived for accurate model identification. Proposed Passive Telemetry RF Sensor System is simple because it consists of R, L and C and measures the change of environment like pressure and humidity in the type of capacitive value. This system adopted UKF algorithm for estimation of this capacitive parameter included in nonlinear system like Passive Telemetry RF Sensor System. For the purpose of obtaining learning data pairs for UKF Algorithm, Phase Difference Detector and Amplitude Detector are proposed respectively which make it possible to get amplitude and phase between input and output voltage. Finally, it is verified that capacitive parameter of proposed Passive Telemetry RF Sensor System using UKF algorithm can be estimated in noisy environment efficiently.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.95-106
• /
• 1992

Active control of acoustic noise is an application area of adaptive digital signal processing with increasingly interest along the last year. This work studies the implementation of the multichannel LMS filter and the application of this algorithm for the reduction of the noise inside a vechicle cabin using a number of 'secondary sources' drived by adaptive filtering of a reference noise source. Firstly, we propose the use of an adaptive method for the time-varient optimal convergence factor. Secondly, we propose the use of adaptive delayed inverse model to estimate the elastic-acoustic transfer function presented in vechicle cabin. The original, primary source is often periodic, with a known fundamental frequency. A suitably filtered reference signal can thus be used to drive the secondary sources. An algorithm is presented for adapting the coefficients of an FIR filter feeding such a secondary source in such a way as to minimize the output of a suitably placed microphone. In this algorithm, the coefficients of adaptive filter driving an array of secondary sources can be adapted to minimize the sum of the squares of the outputs of a number of error microphones. The multichannel LMS algorithm displays that such an algorithm is considered suitable to used for the global suppression of noise in vehicle cabin.

• Journal of Korea Multimedia Society
• /
• v.10 no.7
• /
• pp.912-922
• /
• 2007

Evaluation of distance teaming systems needs a method that maintains a consistent level of difficulty for each test. In this paper, we propose a new algorithm for test sheet generation based on genetic algorithm. Unlike the existing methods that difficulty of each test item is assigned by tutors, in the proposed method, that can be adjusted by the result of the previous tests and the average difficulty of test sheet can be consistently reserved. We propose the new genetic operators to prevent duplications of test items in a test sheet and apply the adjusted difficulty of each test item. The result of simulation shows that difficulty of the test sheet generated by proposed method can be more regular than the random method and the simulated annealing method.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.877-883
• /
• 2013

This paper discussed a transformer-less shunt static synchronous compensator (STATCOM) with consideration of the following aspects: fast compensation of the reactive power, harmonic cancelation and reducing the unbalancing of the 3-phase source side currents. The STATCOM control algorithm is based on the theory of instantaneous reactive power (P-Q theory). A self charging technique is proposed to regulate the dc capacitor voltage at a desired level with the use of a PI controller. In order to regulate the DC link voltage, an off-line Genetic Algorithm (GA) is used to tune the coefficients of the PI controller. This algorithm arranged these coefficients while considering the importance of three factors in the DC link voltage response: overshoot, settling time and rising time. For this investigation, the entire system including the STATCOM, network, harmonics and unbalancing load are simulated in MATLAB/SIMULINK. After that, a 35KVA STATCOM laboratory setup test including two parallel converter modules is designed and the control algorithm is executed on a TMS320F2812 controller platform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1107-1119
• /
• 2006

Data transmission experiences multiplicative distortion in frequency nonselective fading channel. This distortion occurs in OFDM communication channel and can be compensated using an equalizer. Usually, in the case of LMS equalizer, eigenvalue distribution of training signal is enlarged. Large eigenvalue distribution causes principally the performance of a communication system to be deteriorated. This paper proposes a new algorithm that shows the same performance as the existing fast wavelet transform algorithm with less computational complexity. The proposed algorithm was applied to an adaptive equalizer of OFDM communication system. Matlab simulation results show a better performance than the existing one. The proposed algorithm was implemented in VHDL and simulated.

• KIEE International Transactions on Power Engineering
• /
• v.3A no.4
• /
• pp.181-190
• /
• 2003

This paper presents the design of a fuzzy power system stabilizer (FPSS) using an adaptive evolutionary algorithm (AEA). AEA consists of genetic algorithm (GA) for a global search capability and evolution strategy (ES) for a local search in an adaptive manner when the present generation evolves into the next generation. AEA is used to optimize the membership functions and scaling factors of the FPSS. To evaluate the usefulness of the FPSS, we applied it to a single-machine infinite bus system (SIBS) and a power system simulator at the Korea Electrotechnology Research Institute. The FPSS displays better control performance than the conventional power system stabilizer (CPSS) for a three-phase fault in heavy load, which is used when tuning FPSS. To show the robustness of the FPSS, it is applied with disturbances such as change of mechanical torque and three-phase fault in nominal and heavy load, etc. The FPSS also demonstrates better robustness than the CPSS. Experimental results indicate that the FPSS has good system damping under various disturbances such as one-line to ground faults, line parameter changes, transformer tap changes, etc.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.455-462
• /
• 2016

Frequency hopping (FH) is a common characteristic of a wide variety of communication systems. On the other hand, software-defined radio (SDR) is an increasingly utilized technology for implementing modern communication systems. The main challenge when trying to realize an SDR FH system is the frequency tuning time, that is, the higher the hopping rate, the lower the required frequency tuning time. In this paper, significant universal hardware driver tuning options (within GNU Radio software) are investigated to discover the tuning option that gives the minimum frequency tuning time. This paper proposes an improved SDR frequency tuning algorithm for the generation of a target signal (with a given target frequency). The proposed algorithm aims to improve the frequency tuning time without any frequency deviation, thus allowing the realization of modern communication systems with higher FH rates. Moreover, it presents the design and implementation of an original GNU Radio Companion block that utilizes the proposed algorithm. The target SDR platform is that of the Universal Software Radio Peripheral USRP-N210 paired with the RFX2400 daughter board. Our results show that the proposed algorithm achieves higher hopping rates of up to 5,000 hops/second.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.114-121
• /
• 2013

BTC image compression is a simple and easy hardware implementation, is widely used in a video compression techniques required for LCD overdrive. In this paper, methods for reducing compression loss, a multi-level quantization BTC (MLQ-BTC) algorithm is proposed. The process of the MLQ-BTC algorithm is, a input image is compressed and decompressed by Quasi 8-level method and Advanced 2-level BTC method, and select the algorithm with the smallest compression loss. Simulation results show that the proposed algorithm is efficient as compared with PSNR and compression ratio of the existing BTC methods.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.1-9
• /
• 2002

Converged LAN accepts diverse traffics so that performance analysis is very important for successful development of converged LAN. In this paper, we develop simulation program using SALM II and simulate queue management scheme and scheduling algorithm for converged LAN. The result of simulation shows the effect of performance for cyclic service algorithm larger than priority algorithm using weight. And queue management can be easy by implementation of Back Pressure scheme.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1063-1066
• /
• 1999

The delay of cardiac depolarization wave detection in the conventional pacemakers or AICD (automatic implantable cardioverter/ defibrillator, or ICD) has been overlooked. However, it is known that the delay may cause hemodynamic problems and may prevent the proper operation of a new automatic feature, automatic capture verification, that is to be appeared in the near-future devices. In order to reduce the effects of the delay, a delay prevention algorithm was developed and tested by applying three human electrograms. The algorithm set the sensing threshold just above the measured noise level to reduce the detection delay. It is found that the low threshold was able to reduce the delay by 20msec(average) In most cases. The implementation results showed reliability and efficacy of the algorithm, and the algorithm could be applicable to the existing hardware and software of the conventional pacemakers and AICD without any significant modifications.