• 한국철도학회논문집
• /
• 제5권3호
• /
• pp.181-186
• /
• 2002

Aluminum rolling stocks have been developed for six years in Korea and commercial trainsets are being constructed by the carbuilder. Aluminum alloys are sensitive to various imperfections. In this paper, damages and failures of the aluminum carbody taking place during the process of development are investigated and accumulated data are released. Also, remedies for the failures are suggested and design changes are introduced. It is expected that all informations can contribute to construction of reliable and safe aluminum rolling stocks.

• 선박안전
• /
• 제12권
• /
• pp.36-43
• /
• 2003

Fatigue life estimation by the theoretical stress concentration factors are, in general, considerably different from test results. And in calculating stress concentration factor, it is very difficult to consider actual geometry and material property which are the notch shapes, imperfections or defects of materials such as porosities inclusions and casting defects, etc. Therefore, the paper deals with the experimental method to find out the more exact stress concentration factors by measuring the strain distributions on each specimen by 3D-ESPI(Electronic Speckle Pattern Interferometry) System. Then the fatigue lives are compared between theoretical calculations using stress concentration factors determined by 3D-ESPI system and fatigue test results

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 춘계학술대회 학술발표 논문집
• /
• pp.51-54
• /
• 2000

In variable structure control algorithm, sliding mode makes the closed loop system insensitive to modelling uncertainties and external disturbances. However due to imperfections in switching, the system trajectory chatters, which is very undesirable. And the insensitivity property of a sliding mode controller is present only when the system is in the sliding mode. To overcome these shortcomings, in this paper, new sliding mode control algorithm using time-varying sliding surface and fuzzy PI structrue is proposed.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.83-86
• /
• 2001

Seed coat fragments (SCF's) are small portions of seed coat that have been broken from the cotton seeds during ginning, a mechanical process that separates the cotton lint from the seed： Seed coat fragments have drawn attention because they are one of the major imperfections that affect the appearance and quality of cotton yarn and fabrics [1,2]. (omitted)

• Structural Engineering and Mechanics
• /
• 제12권3호
• /
• pp.283-295
• /
• 2001

The postbuckling behaviour of thin plates is an important phenomenon in the design of thin plated structures. In reality plates possess small imperfections and the behaviour of such imperfect plates is of great interest. To numerically study the postbuckling behaviour of imperfect plates explicit incremental or secant matrices have been presented in this paper. These matrices can be used in combination with any thin plate element. The secant matrices are shown to be very accurate in tracing the postbuckling behaviour of thin plates.

• 한국강구조학회 논문집
• /
• 제29권2호
• /
• pp.123-134
• /
• 2017

풍력발전 타워용 종방향 보강 원형단면 강재 쉘에 대하여 재료 및 기하학적 비선형 유한요소법(GMNIA)으로 극한압축강도 해석을 수행하였다. 보강 쉘의 반경 대 두께비, 초기변형 형상 및 진폭, 종방향보강재의 면적 및 간격 등의 주요 설계 파라미터가 압축력을 받는 보강 쉘의 극한강도에 미치는 영향을 분석하였으며, DNV 설계기준에 의한 설계좌굴강도와 유한요소해석으로 구한 극한압축강도를 비교하였다. 기하학적 초기결함의 형상은 선형 좌굴해석으로부터 구한 좌굴모드 및 제작 과정에서 용접으로 발생하는 딤플 변형을 고려하였다. 해석 대상 보강 쉘의 반경 대 두께비는 50~200이며, 종방향보강재는 횡비틀림좌굴과 국부좌굴이 발생하지 않도록 DNV 설계기준에 따라 두께와 돌출폭을 결정하였다.

• 한국의류학회지
• /
• 제39권6호
• /
• pp.877-884
• /
• 2015

Polytrimethylene Terephthalate (PTT) is an eco-fiber with good elastic properties; however, it requires more detailed studies related to spinnability according to blending of various kinds of fibers. The evolution of spinning technology was focused on improved productivity with good quality; in addition, air vortex spinning was recently invented and applied on the spinning factory as the facility with good productivity and quality. More detail spinning technology according to the blending of various kinds of fibers on the air vortex spinning system is required to obtain good quality yarns for high emotional fabrics. In this paper, the physical properties of air vortex, compact and ring staple yarns using PTT/wool/modal blend fibers were investigated with yarn structure to promote high functional PTT that includes fabrics for high emotional garments. Unevenness of air vortex yarns was higher than those of compact and ring yarns; in addition, imperfections were greater than those of compact and ring yarns, which was attributed to a fascinated vortex yarn structure. Tenacity and breaking strain of air vortex yarns were lower than those of compact and ring yarns, caused by higher unevenness and more imperfections of air vortex yarns compared to compact and ring yarns. Vortex yarns showed the highest initial modulus and ring yarns showed the lowest ones which results in a stiff tactile feeling of air vortex yarns in regards to the initial modulus of yarns. Dry and wet thermal shrinkages of air vortex yarns were lower than ring yarns. Good shape retention of vortex yarns was estimated due to low thermal shrinkage.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2263-2271
• /
• 2015

압축력을 받는 얇은 원통형 쉘 구조물은 좌굴에 대한 안정성을 검토해야 한다. 좌굴에 대한 검토 시, 좌굴강도에 민감한 영향을 미치는 초기결함에 대한 중요성은 많은 선행연구에서 언급하였으나 다양한 초기결함의 영향성을 반영 할 수 있는 좌굴강도 연구가 필요하다. Eurocode에서 제시하고 있는 초기결함의 영향성을 반영하는 설계 계수 ${\alpha}$의 경우도 단면의 두께로 결정되는 특정 초기결함만을 포함하고 있어 다양한 초기결함에 대한 좌굴강도를 예측하기 어렵다. 본 논문에서는 초기결함의 영향성을 보기 위해 초기결함의 크기를 변화시켜가며 휨을 받고 있는 원통형 단면의 좌굴강도를 기하 재료비선형 해석을 통해 얻어내었다. FEM해석을 통하여 다양한 초기결함을 반영할 수 있는 수정된 ${\alpha}^{\prime}$을 제안하여 보다 합리적인 원통형 휨 좌굴강도를 계산할 수 있는 방법을 제시하였다.

• 한국강구조학회 논문집
• /
• 제27권1호
• /
• pp.109-118
• /
• 2015

풍력발전 타워용 원형단면 강재 쉘에 대하여 재료 및 기하학적 비선형 유한요소법으로 극한휨강도 해석을 수행하였다. 쉘의 기하학적 초기변형, 반경 대 두께비, 적용 강종 등이 극한휨강도에 미치는 영향을 분석하였으며, Eurocode 3와 AISI 설계기준에 의한 설계휨강도와 유한요소해석으로 구한 극한휨강도를 비교하였다. 비선형 FE 해석에는 DNV-RP-C202에 제시된 쉘의 좌굴모드와 유로코드에 규정된 진원도 허용오차 및 용접에 의한 변형을 기하학적 초기 결함으로 고려하였다. 원통형 쉘의 반경 대 두께비는 60~210 범위를 고려하였으며 SM520과 HSB800 강재로 제작된 것으로 가정하였다.

• 보건행정학회지
• /
• 제11권1호
• /
• pp.107-130
• /
• 2001

During the last year, we had a very severe situation with the strike of physicians working in medical facilities. From that time, many politicians and scholars insisted on the expansion of public hospitals to enhance the public role in the medical care sector. They think that private medical facilities work for profit motivation and that the high proportion of private to whole facilities is an obstacle to the public function of medical care under social insurance system. They found that one of the reasons for failing to prevent the physicians' strike was the high proportion of private facilities. Others insisted that the strike was not a good reason for the expansion of public hospitals. The physicians' strike was a very rare case, and it is not a good basis for generalization of the discussion of public hospitals. Last year almost all apprentice physicians in public facilities took part in the strike, and consequently the public hospitals also lost the role of public function. They view this increasing involvement of government in the medical sector as improper and the cause of inefficiencies. In this paper we review the debate over the expansion of public facilities. To clarify the debate, we review traditional criteria for the role of government in a market system and to apply these criteria to medical care. There are two traditional areas where government Is acknowledged to have a role in a market system: market imperfections and market failure. Where market imperfections and market failure exist, there may be a role for government. The justifications for government intervention are consumer protection and the existence of externalities. One of externalities is to provide medical care for the poor. The appropriate measures to provide medical owe to the poor can be sought in both demand and supply side subsidies. National health insurance is a method of demand subsidies and establishment of public hospitals is a method of supply side subsidies. Under the National Health Insurance System, the expansion of public hospitals is not an appropriate subsidy policy.