• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.248-252
• /
• 2001

A noble single-ended input, double-balanced mixer topology is proposed. The mixer incorporates the common-source amplifier input stage with inductive degeneration for impedance matching. The analysis based on simulations shows that the overall performance of the mixer is excellent and is adjustable by varying the input transistor size to give best characteristics for the given linearity specifications.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.4
• /
• pp.1-6
• /
• 1972

A super widely amplitude modulating AM modulator system, utilizing the impedance trasformation characteristics of transmission line is presented. The analyses and oscillograms obtained from the AM modulator systems using VHF tube, FET or VVC diode as an active element are added to verify the principle of the system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.416-420
• /
• 2008

This paper proposes a new method to improve signal characteristics at branches frequently met in system-level routing. We also introduce the numerical formula which can estimate the time delay due to branches and the simple design guideline for system-level routing. Finally, we propose the routing method which can eliminate the signal reflection for the case of one driver and two receivers (multi-drop topology).

• 전기의세계
• /
• v.27 no.4
• /
• pp.52-59
• /
• 1978

This paper is prepaped, based upon its foundation of the design, first studying the rotor impedance of single and double layer cylindrical induction motor with solid iron rotor, and then inducing torque equation, from it. Classified were some design factors for this design from the result for above and there carried out the evidence of these design and theory after making experimental motors with solid iron rotors and examining torque characteristics.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.1-7
• /
• 1998

This paper reports a dispersion compensation technique to implement tje distortionless transmission line by satisfying the heaviside conditon. Because of the skin depth for aconductor, compensation condition is dependent on the freuqncy variation. For this reason, first, the resistance have been chaacterized in awide range of frequencies, and then found the effective conductivity of the substrate which satisfied the heaviside condition. The phase velocity and the characteristics impedance are prresented nearly constant over a wideband frequency range.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.91-95
• /
• 1992

개영역(open boundary) 내의 변환기에 대한 음장 특성은 경계 조건이 좌표계와 정합되는 특수한 경우 헤름홀쯔 방정식풀이로 그렇지 않은 복잡한 형태의 음장에 대해서는 경계적분법이나 근사해법으로 얻어진다. 그러나 최근 이러한 문제들은 발달된 컴퓨터의 계산능력으로 유한요소법이나 경계요소법을 이용한 수치해법으로 해결되고 있다. 본 연구에서는 경계조건 변화에 따른 원통형 압전변환기의 방사임피던스 및 지향특성을 유한요소법 및 하이브리드형 무한요소법을 이용하여 구하고 기존의 해석적 결과와 비교하여 수중용 변환기 제작의 설계에 대한 기초자료를 제공하고자 한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.161-162
• /
• 2004

탄성 매질에서의 음파 반사 특성에 나타나는 임피던스 변화 특성을 고찰하였다. 접지각이 작은 영역에서의 임피던스 값은 접지각에 관계없이 거의 일정한 값을 가지고 해저면 Type 변화에는 민감하게 변화하는 특성을 나타내었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.109-113
• /
• 2007

In this paper, an arc current controller was designed for the interruption of arc fault currents occurred in a low voltage network. Arc in an electrical network represents the characteristics of low current, high impedance, and high frequency. Conventional controllers do not have arc current interrupt functions. Thus, an arc current controller was designed for the interruption of arc fault currents.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.432-435
• /
• 2007

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencies, 900MHz and 2.45GHz for the radiation characteristics and input impedance matching, as well. The reflection factor is lower than -25dB and a good directivity higher than 5dB is achieved for both frequency.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.192-198
• /
• 1992

The electrical properties of the ultrasonic probes and the piezoelectric composite materials with 1-3 connectivity by the extrusion method have been studied. The relative permittivity and piezoelectric coefficient increase linearly as PZT volume% increases and resonance frequency moves to low frequency as the sample thickness increases. The acoustic impedance matching with body and water is better than PZT ceramics' and the reception sensitivity is fine as the thickness thins down.