• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.164-164
• /
• 2009

A multilayer piezoelectric transformer(MPT) for step-down voltage was made by ceramic stack process. And then, the characteristics of piezoelectric transformer, such as resonance frequency, matching impedance, electro-mechanical coupling coefficient, voltage gain, heat generation and efficiency, are analyzed. The piezoelectric transformer consists of a lead zirconate titanate ceramic with a high electromechanical quality factor. The piezoelectric transformer, with a multilayered construction in the thickness direction, was formed with dimensions 15mm long, 15mm wide and 5mm thick.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.05a
• /
• pp.9-13
• /
• 1995

The effect of WO$_3$ addition and sintering condition on the electrical properties of SrTiO$_3$ceramic have been investigated. Resistivity and capacitance of grains and grain boundaries were obtained by applying impedance spectroscopy. From the result it could be concluded that the temperature dependance of capacitance of WO$_3$doped specimens were influenced directly by the variation of grain boundary capacitance. It was also found that the dispersion frequency increased as the degree of reduction of the specimen increased. The dispersion frequency characteristics showed discernably that the resistivity of the specimen varied with WO$_3$ content. The dielectric properties were influenced directly by the reduction of the specimens. The dielectric constant of grain boundaries of BL capacitor could be obtained by Cole-Cole plot and was influeneced by the amount of WO$_3$ added.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.5
• /
• pp.201-209
• /
• 1985

This paper describes a method for the state estimation by a modified fast decoupled estimation method and system decomposition. The state values are gained by using the weighted least square estimation method, fast decoupled estimation method, and modified fast decoupled estimation method. The estimated values of each method were compared about effectiveness of state values, respectively. This paper investigated the effects of impedance of well-condition or ill-condition into lines. The characteristics of state estimation were gained through hierarchical state estimation. Each method was applied to three model power systems, and, the results of test for the proposed method are given.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.47-51
• /
• 1996

In this paper, we propose a method for compliance control of a SCARA type 2-freedom direct drive(DD) manipulator. Each joint of the manipulator is driven by a travelling ultrasonic motor(USM). The travelling USM has good some characteristics over conventional servo motors such as compact size, light weight, silent motion, high torque and high speed response. By controlling the elasticity and viscosity of robot joints, a robot can work in compliance with external environment. we control the elastic coefficient and the viscous coefficient of joint by adjusting the phase difference of the motor power. And we contemplate transient response of USM with adjusting the elastic coefficient and the viscous coefficient. To use the result, we can control the robot to reach its goal with compliance motion. It remains for further research to develop the impedance control of USM.

• Journal of the Korean Ceramic Society
• /
• v.29 no.7
• /
• pp.505-510
• /
• 1992

The influence of excess iron content (x) and reaction atmosphere on permittivity, permeability and microwave absorbing properties has been investigated in composite specimens embeded with (Ni0.4Zn0.6O)1-x(Fe2O3)1+x powders. A nitrogen atmosphere used for the reaction of the ferrite with excess iron composition (x>0) enhances spinel formation, and thereby increases both the magnetic and the dielectric loss of the ferrite composite. We also investigated the relation between the electromagnetic constants and the absorbing properites using impedance-matching solution maps for zero reflection. It is suggested that a superior microwave absorber can be fabricated through atmosphere and excess iron control during the powder process.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.167-174
• /
• 1995

The anomlous signal, anomaly, recorded by a sub-bottem profiler is analized for exploration of buried objects in the ocean, This anomaly is known as a signal diffracted from the edge of the buried object. Signals obtained from model that and numerical simulation are analized for investigating characteristics of the diffracted signal. From this study a diffracted signal and a non-diffracted signal can be identified, and the location of the object can be obtained. In order to identify an object in the seafloor the dimension of the object should be greater than the wave length used for exploration, and the acoustic impedance should be much greater than that of sediments. A 2-trace stacking of the signals can enhance the feature of strongly diffracted signals whereas it can diminish weak signals.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.995-1001
• /
• 1998

As a basic study for cathode materials of {{{{ { {LiMn }_{2 }O }_{4 } }}-based lithium-ion secondary batteries Li({{{{ { { { {Mn }_{1-$\delta$ }Nb }_{$\delta$} )}_{2 }O }_{4 } }} ($\delta$=0.05, 0.1, 0.2) materials which Nb is substituted for Mn were synthesized by the solid state reaction at 80$0^{\circ}C$ and 110$0^{\circ}C$ respectively. The second phase {{{{ { LiNbO}_{3 } }} appeared above $\delta$=0.1 As the result of im-pedance analysis as the amount of substituted Nb increased the resistivity of grain boundary increased greatly. Compared to undoped-{{{{ { {LiMn }_{2 }O }_{4 } }} the electrical conductivity of Li({{{{ { { { {Mn }_{1-$\delta$ }Nb }_{$\delta$} )}_{2 }O }_{4 } }} decreased slightly but is charging capacity and potential plateau increased.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1205-1212
• /
• 1997

The matrices which consisted of SiC whisker, PES(polyesterasulfone) as a binder, span 80(sorbitan monooleate) as a surfactant, TPP(triphenyl phosphate) as a plasticizer and dichloromethane as a solvent, have been prepared by the various methods such as tape casting, rolling, tape cast-coating and roll-coating method. The fuel cells of single stack type using these matrices are characterized by ac impedance spectroscopy and cyclic voltammetry technique. A fuel cell using a matrix prepared by the tape cast-coating method shows the best performance of 466.34 mA/$\textrm{cm}^2$ at 0.6V because it has the lowest polarization resistance at the interface between electrodes and a matrix due to the largest three phase contact region of gases, catalyst and electrolyte.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.917-922
• /
• 1998

The polarization characteristics of the cathodes were discussed which were composed YSZ and ${(La_{0.75 }Sr_{0.25 })}_{0.95}Mn_{0.8 }Co_{0.2}O_3$ The three-phase-boundary length increased with the addition of YSN resulting in the minimum po-larization resistance at 60(LSMC) : 40(YSZ) wt% When LSMC-YSZ compoiste cathodes was sintered at $1200^{\circ}C$ minimum polarization resistance was observed and the capacitace increased with increasing sintering tem-perature.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.213-220
• /
• 2006

This paper investigates how the PCB power-bus sturcture's characteristics are influenced by the loading of decoupling capacitors in conjunction to other lumped elements including vias. The fields and impedance profiles are rigously evaluated and analyzed on various cases loaded with the above components and their effects will be given to bring better PCB EMC countermeasurs.