• 자동차안전학회지
• /
• 제3권2호
• /
• pp.22-27
• /
• 2011

The side impact test in the Korean New Car Assessment program (KNCAP) has been conducted since 2003. The side impact test method has been contributed to the improvement of the vehicle side structure and the enhancement of the occupant protection performance for the domestic vehicles. The pole side impact test method introduced in the KNCAP in 2010 to enhance the head protection under the severe side crash environment. The pole side impact test is optional for the additional score to be added to the overall rating score. The test results of side and pole side impact test for five vehicles were introduced and compared.

• 한국고분자학회지:고분자과학과기술
• /
• 제1권2호
• /
• pp.97-101
• /
• 1990

• Korea-Australia Rheology Journal
• /
• 제12권2호
• /
• pp.135-141
• /
• 2000

The linear viscoelastic behavior of acrylonitrile-butadiene-styrene (ABS) polymers with different rubber content has been investigated in the frame of a linear viscoelastic model, which takes into account the inter-connectivity of the dispersed rubber particles. The model developed in our previous work has been shown to properly predict the low frequency plateau for the storage modulus, which is generally observed in polymer blends containing core-shell-type impact modifiers. In the present study, further experiments have been carried out on ABS polymers with different rubber content to verify the validity of our linear viscoelastic model. It has been found that our model describes quite properly the rheological behavior of ABS polymers with different rubber content, especially at low frequencies. The experimental data confirm that our model describes the rheological properties of rubber-modified thermoplastic polymers with strong adhesion at the particle/matrix interface more accurately than the Palierne model.

• 마케팅과학연구
• /
• 제13권
• /
• pp.89-111
• /
• 2004

본 연구는 국제복합상표 제휴에서 소비자태도 결정요인에 관한 연구모형을 설정하고, 이를 4개의 국제복합상표에 적용하여 관련 연구문제를 검정하였다. 모형 본석의 결과를 토대로 다음과 같은 결론이 도출되었다. 첫째, 주상표가 부상표보다 복합상표에 대한 소비자태도에 더 큰 영향을 미치는데, 이는 선행연구의 연구결과를 지지하고 있다. 또한 주상표와 부상표가 복합상표에 대한 소비자태도에 미치는 영향은 구성상표간의 제품법주거리가 멀어질수록 그 영향력이 적어진다는 것을 확인하였다. 둘째, 구성상표간의 제품범주거리가 가까운 경우에는 구성상표간의 상표속성 보완성이, 먼 경우에는 원상표와 복합상표간의 적합성이 복합상표에 대한 소비자태도에 더 큰 영향을 미친다는 점이 밝혀졌다. 이러한 분석을 바탕으로 관리적 시사점을 도출하였다.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1671-1676
• /
• 2015

폴리-L-유산 (PLLA)/폴리-D-유산(PDLA)의 스테레오컴플렉스(SC) 특유의 결정 거동은 PLLA/PDLA의 블렌드의 특정한 용융 조건에서 나타난다. 이를 적용하여 PLA 스테레오컴플렉스를 제조하기 위해 전반적인 조성에서 PLLA와 PDLA를 블렌드 하였다. 또한 충격 강도와 열변형온도 같은 기계적 물성 및 열적 특성을 향상시키기 위해 충격보강제, 탈크와 유리섬유(GF) 등의 보강제를 첨가하였다. 그 결과로 열변형 온도가 $115^{\circ}C$ 에서 관찰 되는 조성의 복합재를 제조하였다. 더 경제적인 방법으로, PLLA와 상용화된 폴리프로필렌(PP)을 전반적인 조성에서 블렌드 하였다. 그 결과, 특정 조성에서 상용화된 PP/탈크 복합재와 ABS에 적용시킬 수 있는 물성을 나타내었다. 이러한 결과는 PP와 PLLA같은 매트릭스 수지에 유리섬유 및 충격보강제를 잘 분산시키는 것에서 기인하는 것으로 판단된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.149-152
• /
• 2001

Poly-butylene-terephalate(PBT) can be impact modified by blending with ABS material. The effects of the type of compatibilizer and ABS content on the mechanical properties of PBT/ABS blend were examined in this study. EVA-g-GMA and three type of polycarbonates were used as the compatibilizer. As the GMA content in EVA-g-GMA was increased, the tensile strength of PBT/ABS blend increased and the impact strength of it decreased. With increasing the EVA-g-GMA content in PBT/ABS blend, the tensile strength and impact strength decreased. With PC compatibilizer, the tensile strength of PBT/ABS blend decreased as the ABS content increased. However, the maximum impact strength was observed in 20~30% ABS content range.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.725-731
• /
• 2003

The effect of organic processing parameters on the dispersion stability of the BaTiO$_3$-based dielectric particles and borosilicate glass particulate suspensions was investigated in a system where organic solvents, dispersant, binder and modifier were used as processing additives in a low temperature cofired ceramic fabrication processes. Two- and three-component organic solvents were used to disperse ceramic particles and it was found the better stability in the particulate suspension prepared in a bi-solvent, which was consists of toluene and ethanol in a non-azeotropic composition. The addition amount of organic additives had a great impact on dispersion in the present investigation. The flow curves of the suspensions prepared with binder and modifier were fitted according to the power-law equation, which indicates that the internal structure of the suspension could be disturbed under the applied shear stress. Finally, the LTCC green tapes were successfully tape-cast based upon the optimum formulation of LTCC suspension and its microstructure was compared with that of the hard-agglomerates.

• 공업화학
• /
• 제5권2호
• /
• pp.215-222
• /
• 1994

Chlorosulfonated polyethylene(CSM)은 수지의 toughness modifier로서 사용할 수 있다. CSM는 산소와 오존에 대해서 저항성이 클 뿐 아니라 가교 가능한 기능기인 sulfonyl chloride를 가졌기 때문에 금속 산화물에 의해 가교 될 수 있다. Polyvlnylchloride(PVC)는 물성이 좋을 뿐 아니라 값이 싼 plastic이기 때문에 널리 사용되는 범용수지이나 저온에서 충격강도가 약하고 빛과 산소 그리고 오존에 의해서 분해되어 물성을 떨어뜨리는 결점이 있다. 이런 결점을 개선하고저 PVC/CSM블렌드를 연구하였다. CSM함량 10~30%에서 현저한 toughening효과를 나타내었다. CSM을 블렌드함으로써 PVC의 내후성, 내오존성 및 기계적 성질이 개선되었으며 toughening효과를 SEM을 통하여 관찰하고 확인하였다.

• 한국주조공학회지
• /
• 제13권1호
• /
• pp.94-101
• /
• 1993

The effects of strontium content as modifier on microstructure and mechanical properties were studied in Al-10%Si-0.3%Mg cast alloys. There were not big differences in the form of eutectic Si particle and its morphology depending on adding amount of strontium, but the alloy modified by 0.012%Sr had shown the higher values than the alloy modified 0.038%Sr in strength, elongation and impact value.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.107-113
• /
• 2022

The effects of fillers [talc, calcium carbonate, glass fiber, and EBR (ethylene-butene rubber)] on the shrinkage and mechanical properties of injection-molded polypropylene composites were investigated. The shrinkage correlated with the shape of the filler particles: at the same amount added, glass fibers with a large aspect ratio had the greatest effect on the shrinkage of polypropylene composites, followed by flake-shaped talc and granular calcium carbonate. It was confirmed that the addition of EBR rubber as an impact strength modifier reduced shrinkage proportionally to the added content. In addition, the addition of glass fiber resulted in the greatest increases in tensile and flexural strengths.