• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.02a
• /
• pp.37-59
• /
• 2004

In the case of Ni/Au finished pad on the package side, the solder joint of SnAgCu system can bring brittle fracture under impact load such as drop test. Therefore, it's difficult to prevent the brittle fracture of lead-free solder, by controlling Cu content. The failure locus existing on the interface between $(Ni,Cu)_3Sn_4\;and\;(Cu,Ni)_6Sn_5$ IMC layers must be changed to other site in order to avoid brittle fracture due to impact load. It was not found any clear evidence that there were two IMC layers exist. But it was strongly assumed these were two layers which have different Cu-Ni composition. From the above analysis it was assumed that Cu atom in the solder alloy or substrate seemed to affect IMC composition and cause to IMC brittle fracture.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.1080-1084
• /
• 1989

The motion of an workpiece to be manipulated is determined by the forces applied to the workpiece. During the contact between the robot hand and the workpiece, impulsive forces may dominate all other forces, and determine the ultimate success or failure of a task. Therefore, one of the important problems in the robot hands is the control of the initial impact force. In this paper, the problem of the force control of robot hand under system with contact force is presented. The principle of energy can be applied in the modelling of the impact force. In order to achieve stable contact and avoid bounces and vibrations, VSS is adopted in the design of the contact force controller. Some simulations are carried out for a pushing operation to control the contact force.

• Journal of Multimedia Information System
• /
• v.7 no.1
• /
• pp.55-72
• /
• 2020

As the IT service environment grows, it is critical in terms of IT service quality to minimize the occurrence of failures due to changes in applications and to diagnose and recover in a short period of time how failure will affect the business. Thus, the Defense Acquisition Program Administration (DAPA) has been building and operating ITSMs to implement IT service management in a leading manner. Information Technology Service Management (ITSM) is divided into events, obstacles, changes, versions and setup management to ensure flexibility and stability in service delivery. It is also operated separately from service level, availability, capacity, financial and IT service continuity management to ensure service quality and cost efficiency. Based on ITSM military service history, this study looks at the impact of quality of service on value, satisfaction, and trust. The results of the analysis are highly valuable for future ITSM implementation and operation.

• 한국디지털정책학회:학술대회논문집
• /
• 2007.06a
• /
• pp.297-304
• /
• 2007

The purpose of this research is to investigate the current state of e-commerce for corporations in the steel industry and to analyze the factors that led failure in active use of e-commerce. Data from 51 companies are col looted. Factors that affect the e-commerce adoption and use of were analyzed. The influence of e-commerce utilization on corporate performance was also examined. It was found that several factors known to influence e-commerce use in the steel industry such as transact ion methods, preferences, and the level of information-orientation, did not actually have a significant impact. Rather items such as the maturity of e-commerce experience and perceptual compatibility between product characteristics and e-commerce turned out to have a significant influence on the utilization levels of e-commerce. The level of e-commerce utilization in system had a significant impact on each of the three performance dimensions : internal performance, external performance and financial performance.

• Wind and Structures
• /
• v.3 no.1
• /
• pp.23-40
• /
• 2000

In the early morning hours of February 23rd, 1998, seven large tornadoes ravaged central Florida. A total of 42 people were killed and millions of dollars of damage was done. A strip mall and other commercial structures sustained considerable damage and several residential areas were completely destroyed. Based on field observations, the paper examines the causes and sequence of structural failure for the masonry single family homes. Wind speeds are estimated based on the observed damage, and compared to the meteorological data. Finally, recommendations are given that could help to eliminate or reduce similar failures in the future. It was found that with simple, cost effective measures, most if not all of the damage could have been prevented.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.183-194
• /
• 1995

This research paper describes several possible suggestions which are essential to develop for Built-In-Test(BIT) related systems, such as more precise BIT parameter analysis, sensitivity analysis of the impact of BIT on redundant systems, statistical inference of field data for BIT performance parameters, methods of reducing BIT false alarms, BIT application in industrial automation and remote control, prevent the system from the impact of BIT failure, undetections and false alarms, life cycle cost analysis for BIT. And, it is mainly focused on redundancy technique for solving BIT diagnostic problems. Algorithms for redundant systems : overlapping technique, flexible redundant BITs are presented and case study will be shown based on various experiment.

• Industrial Engineering and Management Systems
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2003

Among many dimensional or dimensionless amplitude parameters, kurtosis and ID Factor are said to be sensitive good parameters for machine diagnosis. In this paper, a simplified calculation method for both parameters is introduced when impact vibration arise in the observed data. Compared with the past papers' results, this new method shows a good result which fit well. This calculation method is simple enough to be executed even on a pocketsize calculator and is very practical at the factory of maintenance field. This can be installed in microcomputer chips and utilized as a tool for early stage detection of the failure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2185-2191
• /
• 2009

Wind power and photovoltaic(PV) generation systems are the fastest growing sources of renewable energy. The nonlinear devices, such as power electronic converter or inverter, of wind power and PV generation systems are the source of harmonics in power systems. The harmonic-related problems can have significant detrimental effects in the power system, such as capacitor heating, data communication interference, rotating equipment heating, transformer heating, relay misoperation and switchgear failure. There is a greater need for harmonic analysis that can properly maintain the power quality. By measuring harmonics of existing wind power and PV generation systems as harmonics modeling, the studies were made to see the harmonic impact of grid-connected wind power and PV generation systems.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.474-483
• /
• 2021

To establish the exclusive role of hydrogen on burst behaviour of Zircaloy-4 during loss-of-coolant accident transients, an extensive single-rod burst tests were conducted on both unirradiated as-received and hydrogenated Zircaloy-4 cladding tubes at different heating rates and internal overpressures. The visual observations of cladding tubes during bursting as well as post-burst are presented in detail to understand the effect of hydrogen concentration, heating rate, and internal pressure. Impact of hydrogen on burst parameters-burst stress, burst strain, burst temperature-during loss-of-coolant accident transients are compared and discussed. Rupture at multiple locations for hydrogenated cladding at lower internal pressure and higher heating rate is reported for the very first time. A novel burst criterion accounting hydrogen concentration in nuclear fuel cladding is proposed.

• Earthquakes and Structures
• /
• v.17 no.1
• /
• pp.101-113
• /
• 2019

Earthquake-induced pounding is one of the major reasons for structural failure in earthquake prone cities. An accurate description of the pounding phenomenon of two buildings requires the consideration of systems with a large number of degrees of freedom including adequate contact impact formulations. In this paper, firstly, a node to surface formulation for the realization of state-of-the-art pounding models for structural beam elements is presented. Secondly, a hierarchical substructure technique is introduced, which is adapted to the structural pounding problem. The numerical accuracy and efficiency of the method, especially for the contact forces, are verified on an academic example, applying four different impact elements. Error estimations are carried out and compared with the classical modal truncation method. It is demonstrated that the hierarchical substructure method is indeed able to significantly speed up the numeric integration procedure by preserving a required level of accuracy.