• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.495-509
• /
• 2019

The objective of this study is to analyze the compressibility effects of multiphase cavitating flow during the water-entry process. For this purpose, the water-entry of a projectile at transonic speed is investigated computationally. A temperature-adjusted Tait equation is used to describe the compressibility effects in water, and air and vapor are treated as ideal gases. First, the computational methodology is validated by comparing the simulation results with the experimental measurements of drag coefficient and the theoretical results of cavity shape. Second, based on the computational methodology, the hydrodynamic characteristics of flow are investigated. After analyzing the cavitating flow in compressible and incompressible fluids, the characteristics under compressible conditions are focused upon. The results show that the compressibility effects play a significant role in the development of cavitation and the pressure inside the cavity. More specifically, the drag coefficient and cavity size tend to be larger in the compressible case than those in the incompressible case. Furthermore, the influence of entry velocities on the hydrodynamic characteristics is investigated to provide an insight into the compressibility effects on cavitating flow. The results show that the drag coefficient and the impact pressure vary with the entry velocity, and the prediction formulas for drag coefficient and impact pressure are established respectively in the present study.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.42-51
• /
• 2020

In this paper, the authors propose the pseudo complex correlation coefficient (PCCC) of the two complex random variables (RV), because the four real correlation coefficients (RCC) of the corresponding four real RVs cannot be obtained only from the complex correlation coefficient (CCC) of given two complex RV. Such observation is motivated by the general statement; "The complex jointly-Gaussian random M-vector cannot be completely described by the complex covariance matrix, even though the real Gaussian random 2M-vector can be completely descried by the real covariance matrix. Therefore, in order to describe completely the complex jointly-Gaussian random M-vector, we need an additional matrix, namely the complex pseudo-covariance matrix, along with the complex covariance matrix." Then, we apply PCCC to correlated information sources (CIS) for non-orthogonal multiple access (NOMA) in 5G system, and investigate impact of the proposed PCCC on the achievable data rate of the stronger channel user in the conventional successive interference cancellation (SIC) NOMA with CIS. It is shown that for the given same CCC, the achievable data rates with the different PCCC are different, because the corresponding RCC are different. We also show that as the absolute value of the same CCC increases, the impact of the different PCCC becomes more significant.

• The Journal of Fisheries Business Administration
• /
• v.43 no.3
• /
• pp.75-87
• /
• 2012

Today, the Korean fisheries is undergoing significant hardships, both domestically and internationally. While declining amount of catch, ascending international oil prices and others pose a compelling challenge to the fishing sector, the ever strengthening influence of international institutions related to fisheries and international trade organizations also compel to bring about myriad of changes in the realm of fishery products. Against the backdrop, this study attempted to examine the fisheries catch, aquaculture, service, processing fields in terms of its rippling effect and of how the industry has been changed by analyzing the past and present through an input-output analysis. As for research methods, 168 items of the input-output tables in 2000, 2005, 2009, and 2010 were integrated to form and classify 32 sectors (28 basic sectors + catch, aquaculture, fishery service, processed fishery products) so as to generate production inducement coefficient, sensitivity coefficient, and impact coefficient. The analysis results revealed that : though the linkage effect of fishery industry was not very sizable, the impact coefficient of the processed fishery products was high; the consumption and investment coefficient sector among production inducement coefficient was on an upturn trend ; the export coefficient was tended to decline. In the future research, it is necessary to carry out a study based on the integration of detailed classification (404 sector) and a study and analysis of fishery industry by different regions through the inter-regional input-output tables. The fishery industry is one of the crucial industries in Korea. The fishery industry is not only important in its own right but also significant as it exerts influence over other industries. Therefore, it is required that there should be more investment and supports for the development of the fishery industry, and pay efforts to ensure that the investment and development could lead to mutual growth for both the fishery and other various industries.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.719-723
• /
• 2002

The purpose of this study is to suggest the correlation of single-number ratings for sound insulation by floor impact. As a assessment method of impact sound insulation. we selected the IIC contour of ISO, A weighted sound level. Inverse A-weighting curve and L-Index of japanese industrial standard. And we estimated the single-number ratings by application the measured data of impact sound level to each method. The results showed that the coefficients of determination between each two single-number ratings were very high (more than 0.9169). And In the condition of same assessment method, the coefficient of determination for light-weight impact sound was higher than that for heavy-weight impact sound.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.41-46
• /
• 2002

The general purpose of this paper is Evaluation of material properties in spring steels by investigate correlation between ultrasonic attenuation and virker's hardness, charpy impact properties, microstructures. The three test speciments of the $490{\times}90 mm$ plates and 20 mm thick are used but differ in heat treatment, one is rolled plate, the second is quenched and then tempered, and the third is quenched. ultrasonic attenuation were obtained at fifteen locations on the plates. In order to investigate the correlation between hardness ( especially, HV ) and the attenuation, the virker's hardness and the microstructures were observed for three spring steels. also the charpy impact test were carried out at the room temperature in order to investigate the relationship between impact properties and the attenuation. The experimental results obtained from three different spring related to the heat treatment conditions and attenuation coefficient is increased with increasing the hardness(HV). Ultrasonic attenuation coefficients have shawn are ability to distinguish among spring steels.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.93-100
• /
• 2005

The purpose of this study is to investigate the physical properties of porous concrete according to the aggregate shape and size which is produced by con crusher and impact crusher. For this purpose, the selected test variables were the aggregate size and shape, the ratio of water to cement and the ratio of paste to aggregate. The results of this study showed that its economic performance and physical properties were improved using the aggregate made by impact crusher. The coefficient of permeability and compressive strength of porous concrete had a close correlationship with the void ratio, and it was suggested as a function of void ratio.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.99-108
• /
• 2020

Although the relationship between income and income inequality has previously been discussed, the present study applies a dynamic approach to analyze the specific relationship between forest household income and income inequality. For this analysis, a unit root test and a cointegration test were conducted to characterize the nature of income time-series data. After converting unstable time-series data into stable time-series data, a VAR model was estimated. Based on this model, an impulse-response was generated and variance-decomposition analysis was performed. These analyses showed that the effect of forest household income was relatively larger than that of the Gini coefficient, and that the impact of forest household income not only caused income to increase but also caused the Gini coefficient to decrease. In addition, the impact of the Gini coefficient had an impact on reducing forest household income and further increasing income inequality. We conclude that, with the aim of alleviating the inequality of forest household income, an income growth policy would be more effective than an income distribution policy.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.299-311
• /
• 2021

The purpose of this study is to analyze the ripple effect of the Chinese education industry on the national economy by using the industry-related table of 2017 by the China Statistical Office to use it as policy data for revitalization of the Chinese education industry in the future. To achieve this purpose, 149 industries in the basic classification of the industry-related table were classified into 32 industries. Based on these classifications, by analyzing the production induction coefficient, sensitivity coefficient, influence coefficient, yield inducement coefficient, production tax induction coefficient, and labor induction coefficient, etc. The purpose of this study is to understand the relationship between different industries and to find out the economic impact of the Chinese education industry. The analysis results show that in 2017, the total production induction coefficient of China's education industry was 1.7188, the row total was 1.0626, the sensitivity coefficient was 0.01211, the influence coefficient was 0.01958, the income induction coefficient was 0.6667, the production tax induction coefficient was 0.035, and the final demand was 1 billion yuan. When this occurs, the labor induction coefficient shows a total of 31,254 persons (indirect 15,541 persons, direct 15,713 persons). Based on the analysis results, this study suggested the implications that government support, technology introduction and application of new operating models, policy regulations, and efficient supervision of the system and president are required for further development of the Chinese education industry.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.55-63
• /
• 2003

The traffic accident is the prerequisite of the traffic accident reconstruction. In this study, the traffic accident (forward collision) and traffic accident reconstruction (inverse collision) simulations are conducted to improve the quality and accuracy of the traffic accident reconstruction. The vehicle and tire models are used to simulate the trajectories for the post-impact motion of the vehicles after collision. The impact dynamic model applicable to the forward and inverse collision simulations is also provided. The accuracy of impact analysis for the vehicular collision depends on the accuracy of the coefficients of restitution and friction. The neural network is used to estimate these coefficients. The forward and inverse collision simulations for the multi-collisions are conducted. The new method fur the accident reconstruction is proposed to calculate the pre-impact velocities of the vehicles without using the trial and error process which requires the repeated calculations of the initial velocities until the forward collision simulation satisfies with the accident evidences. This method estimates the pre-impact velocities of the vehicles by analyzing the trajectories of the vehicles. The vehicle slides on a road surface not only under the skidding during an emergency braking but also under the steering. A vehicle over steering or cornering with excessive speed loses the traction and leaves tile yaw marks on the road surface. The new critical speed formula based on the vehicle dynamics is proposed to analyze the yaw marks and shows smaller errors than ones of the existing critical speed formula.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.689-693
• /
• 1997

This paper deals wth the impact and the transient analysis of the impact absorbing system consist of double damping. piston and sprlng system in spreader to increaas efficlcncy of it. It shows the optimum damping coefficient and spring constant under the limited stroku of Impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain reaction force as time. which is characteristic of dashpot and rubber. This system absorbed 11.5 and 88.5 % impact energq at the spring and the damper respectively.