• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.2
• /
• pp.193-209
• /
• 2012

China's airline industry is experiencing a booming development as one hand, on the other hand the incidents involving unruly behaviour on board aircraft also becomes a growing concern for the whole industry. The thesis examines the basic issues concerning the unruly behaviour, such as definition of unruly behaviour, the impact and root causes of unruly behaviour. Then it focuses on the China's legal sources governing the problem of unruly behaviour. Generally speaking, China's legislation with this respect is systematic and self-contained, except some minor shortcomings which need to be revised. Finally the thesis holds the view that the preventative measures jointly contributed by all the parties concerned are something more important than the legislation itself.

• Ocean Systems Engineering
• /
• v.7 no.3
• /
• pp.179-193
• /
• 2017

Dynamic response analysis of offshore triceratops with stiffened buoyant legs under impact and non-impact waves is presented. Triceratops is relatively new-generation complaint platform being explored in the recent past for its suitability in ultra-deep waters. Buoyant legs support the deck through ball joints, which partially isolate the deck by not transferring rotation from legs to the deck. Buoyant legs are interconnected using equally spaced stiffeners, inducing more integral action in dispersing the encountered wave loads. Two typical nonlinear waves under very high sea state are used to simulate impact and non-impact waves. Parameters of JONSWAP spectrum are chosen to produce waves with high vertical and horizontal asymmetries. Impact waves are simulated by steep, front asymmetric waves while non-impact waves are simulated using Stokes nonlinear irregular waves. Based on the numerical analyses presented, it is seen that the platform experiences both steady state (springing) and transient response (ringing) of high amplitudes. Response of the deck shows significant reduction in rotational degrees-of-freedom due to isolation offered by ball joints. Weak-asymmetric waves, resulting in non-impact waves cause steady state response. Beat phenomenon is noticed in almost all degrees-of-freedom but values in sway, roll and yaw are considerably low as angle of incidence is zero degrees. Impact waves cause response in higher frequencies; bursting nature of pitch response is a clear manifestation of the effect of impact waves on buoyant legs. Non-impact waves cause response similar to that of a beating phenomenon in all active degrees-of-freedom, which otherwise would not be present under normal loading. Power spectral density plots show energy content of response for a wide bandwidth of frequencies, indicating an alarming behaviour apart from being highly nonlinear. Heave, being one of the stiff degrees-of-freedom is triggered under non-impact waves, which resulted in tether tension variation under non-impact waves as well. Reduced deck response aids functional requirements of triceratops even under impact and non-impact waves. Stiffened group of buoyant legs enable a monolithic behaviour, enhancing stiffness in vertical plane.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1929-1934
• /
• 2022

Besides recent progresses in the physics-based modelling of fission gas and helium behaviour, the scarcity of experimental data concerning their combined behaviour (i.e., cocktail) hinders further model developments. For this reason, in this work, we propose a modelling methodology aimed at providing recommendations for accelerated experimental investigations. By exploring a wide range of annealing temperatures and cocktail compositions with a physics-based modelling approach we identify the most interesting conditions to be targeted by future experiments. To corroborate the recommendations arising from the proposed methodology, we include a sensitivity analysis quantifying the impact of the model parameters on fission gas and helium release, in conditions representative of high and low burnup.

• The Journal of Korean Society for School & Community Health Education
• /
• v.17 no.2
• /
• pp.71-81
• /
• 2016

Objectives: The objective and aim of this research is to cultivate a problem-solving ability by analysing the factors that negatively impact on filming sexual behaviour by adolescent. Methods: This research mainly refer to the secondary reference which is conducted a survey of all over the country by National Youth Policy Institute. 3,963 students on the register who participated in survey between 12th of June in 2014 and 15th of July in 2014 was nominated as final recipient for research. Results: Firstly, it has been shown that students who have watched sexual video have more experienced at filming sexual behaviour. In the area of stimulation(p<0.01) and emulation/sharing(p<0.001) except to violation of human rights, adolescent who has experienced at filming sexual behaviour significantly gains more high score than adolescent who does not have experienced statistically. Secondly, as a result of analysis the factors which negatively impact on filming sexual behaviour by adolescent with Binary logistic regression analysis, the adolescent who have shared sexual video was impacted on having an experience at filming sexual behaviour. and the adolescent who had sexual conversation was impacted on having an experience at filming sexual behaviour. Conclusion: A local autonomous entity and school should enforce systematic health education and practical management of mass media rather than unconditional restriction of adolescent's use of smart phone. To carry out this, the state and a local autonomous entity should urge plan for support for settling the instructive environment about using smart phone.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.158-164
• /
• 2000

In this study a computer program is developed for analyzing the elasto-plastic dynamic behaviors of the plate subjected to line-loading by a low-velocity impactor. The equilibrium equation associated with the Hertzian contact law is formulated to evaluate the transient dynamic behaviour of the impacted plate. Compared with an elastic analysis, the effects of material plasticity are presented. Consequently, in the case of elasto-plastic analysys, impulse decreases, displacements increase and contact time duration is longer than the elastic case for same finite element model. And the time variation of the impacting load is not significant due to the plasticity except at the beginning of impact duration, and the induced stresses of the plate are more realistic.

• The Journal of Asian Finance, Economics and Business
• /
• v.4 no.1
• /
• pp.67-78
• /
• 2017

The competitive nature of enterprises requires organizations to foster an environment that encourages employee innovation that leads to profitability and customer satisfaction. Organizational innovation is influenced by several factors with employee behaviour being one of the important factors. Employees contribute in the innovation process and thus, it is important for organizations to understand employee expectations to demonstrate innovative work behaviour in order to create and maintain an innovative work culture. In the present study, a conceptual model based on culture, reward and program, training, compensations, leadership and systems was tested to assess that impact on employee expectations leading to innovative work behaviour. The study was conducted in the context of city-state of Singapore due to its significant emphasis on promoting and nurturing employee innovation. The model was tested using empirical data collected through a survey of employees in Singapore. The results indicate that while culture, rewards and training programs have a direct relationship on employee expectations to demonstrate innovative work behaviour, when considered together, leadership and systems are significantly and positively associated with employee expectations. These factors are usually under the control of organizations and can be enhanced through systematic interventions, thereby providing practice managers an avenue to improve employee innovation behaviour. The other implications of the findings and future scope are discussed.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.4 s.18
• /
• pp.7-14
• /
• 2005

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.201-210
• /
• 2021

COVID-19 presented the world with a severe loss of life and impact, which has no geographical bounds or expected time to when its effects will subside. It has affected countries across the globe, disrupting economic levels and businesses in every industry while also altering individuals' everyday lives. The current research aims to examine the impact of coronavirus pandemic on entrepreneur's business activities and their perceptions on the difference in consumer behavior during this time. The findings reveal the pandemic negatively impacted business productivity and profits, forcing many businesses to physically close permanently. Surprisingly, female entrepreneurs do not perceive a change in consumer behavior compared to pre-COVID-19 times. Interestingly, the results indicate there is a negative impact on employees' efficiency to conduct work in which almost no research has conveyed such a finding. For this purpose, a survey was conducted with 445 responses from male and female entrepreneurs in the capital city of Riyadh, Saudi Arabia, using a simple random sample over the period of four months. Ultimately, this research will help entrepreneurs gain more knowledge and a deeper understanding of this new environment necessary to undertaking certain measures and adaptability in order to sustain their businesses during unprecedented times.

• Computers and Concrete
• /
• v.22 no.3
• /
• pp.337-353
• /
• 2018

The present study focuses on examining the structural behaviour of steel-fibre-reinforced concrete (SFRC) beams under high rates of loading largely associated with impact problems. Fibres are added to the concrete mix to enhance ductility and energy absorption, which is important for impact-resistant design. A simple, yet practical non-linear finite-element analysis (NLFEA) model was used in the present study. Experimental static and impact tests were also carried out on beams spanning 1.3 meter with weights dropped from heights of 1.5 m and 2.5 m, respectively. The numerical model realistically describes the fully-brittle tensile behaviour of plain concrete as well as the contribution of steel fibres to the post-cracking response (the latter was allowed for by conveniently adjusting the constitutive relations for plain concrete, mainly in uniaxial tension). Suitable material relations (describing compression, tension and shear) were selected for SFRC and incorporated into ABAQUS software Brittle Cracking concrete model. A more complex model (i.e., the Damaged Plasticity concrete model in ABAQUS) was also considered and it was found that the seemingly simple (but fundamental) Brittle Cracking model yielded reliable results. Published data obtained from drop-weight experimental tests on RC and SFRC beams indicates that there is an increase in the maximum load recorded (compared to the corresponding static one) and a reduction in the portion of the beam span reacting to the impact load. However, there is considerable scatter and the specimens were often tested to complete destruction and thus yielding post-failure characteristics of little design value and making it difficult to pinpoint the actual load-carrying capacity and identify the associated true ultimate limit state (ULS). To address this, dynamic NLFEA was employed and the impact load applied was reduced gradually and applied in pulses to pinpoint the actual failure point. Different case studies were considered covering impact loading responses at both the material and structural levels as well as comparisons between RC and SFRC specimens. Steel fibres were found to increase the load-carrying capacity and deformability by offering better control over the cracking process concrete undergoes and allowing the impact energy to be absorbed more effectively compared to conventional RC members. This is useful for impact-resistant design of SFRC beams.

• Journal of Information Technology Services
• /
• v.14 no.3
• /
• pp.19-31
• /
• 2015

As the social value gradually increases, the company's social responsibilities are granted and there are a growing number of requirements for a public value to economic value for the company. The cause marketing which has become widely known, it allows us to realize these values and in dictionary meaning, enterprises justification combines with marketing strategically, and is also illustrated as 'Cause Related Marketing.' For specific action plan, it is a marketing by connecting the selling of the product and donation to work out together to improve environment, public health, and poverty. This study examines how the cause marketing impact on the consumer's purchasing behaviour and purchasing intention and to find out whether there is an interrelationship. As a result, it turned out that cause marketing effect on purchasing attitudes and also the purchasing behaviour impact on the purchasing intention. Furthermore, the cause marketing influence on purchasing intention. As the idea of consumption gradually changes from the product consumption to value-based consumption as the time flows, the result of this research drew out the meaningful contents.