• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.49-55
• /
• 1996

Poly(4, 4'-diphenyl ether pyromellitamic acid) was prepared from pyromellitic anhydride with 4, 4'-diamino diphenyl ether by means of low-temperature solution polymeriztion. The reation was exothermic and very fast when carried out at room temperature. The synthesized poly(4, 4'-diphenyl ether pyromellitamic acid) was converted to poly(4, 4'-diphenyl ether pyromellitimide) by thermal dehydrocyclization. FTIR analysis was widely used as a means of determining the course of imidization from intensity of characteristic bands of the imide ring at $1790cm^{-1}$ and $1490cm^{-1}$. The density of poly(4, 4'-diphenyl ether pyromellitimide) was higher than poly(4, 4'-diphenyl ether pyromellitamic acid) indicating the greater crystallinity, perhaps because of the reduction of molar volume of polymers

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2272-2278
• /
• 2010

A new hybrid thermosetting maleimido epoxy compound 4-(N-maleimidophenyl) glycidylether (N-MPGE) is prepared by reacting N-(4-hydroxyphenyl) maleimide (HPM) with Epichlorohydrin by using benzyltrimethylammonium chloride as a catalyst. The resulting compound possesses both the oxirane ring and maleimide group. The curing reaction of these maleimidophenyl glycidylether epoxy compound (N-MPGE) with amines as curing agents such as ethylendiamine (EDA), diethylentriamine (DETA) and triethylenetetramine (TETA), aminoethylpiperazine (AEP) and isophoronediamine, IPDA), are studied. Incorporation of maleimide groups in the epichlorohydrin provides cyclic imide structure and high cross-linking density to the cured resins. The cured samples exhibited good thermal stability, excellent chemical (acid/alkali/solvent) and water absorption resistance. Morphological studies by the SEM technique further confirmed the phase homogeneity net work of the cured systems.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.94-97
• /
• 1998

We have been studying :he synthesis of thermotropic polyurethanes, based on structural modifications by means of (i) the introduction of bulky substituent group in the aromatic ring to decrease the degree of lateral packing, (ii) the copolymerization of two kinds of monomers having different alkylene lengths to lower the regularity of the polymer structure, and (iii) the use of nonlinear monomers to lower the persistence length of the polymer chain in the liquid crystalline phase and to decrease the lateral interactions in the solid state. (omitted)

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.35-41
• /
• 2004

Poly(ethylene terephthalate), polyimide(Kapton), and polypropylene surfaces were modified with argon low temperature plasma by RF glow discharge at 240m Torr, 40W to investigate the surface morphological changes due to the plasma treatment using atomic force microscopy(AFM). Analysis of the AFM images and Ra(average roughness) revealed that the plasma treatment resulted in significant ablation on the surfaces. The morphological changes and surface roughness, however, were different depending on material characteristics such as heat stability, presence of amorphous region, swelling phenomenon, and molecular structure of repeating unit. It was assumed that polypropylene due to its tertiary hydrogen was ablated easily compared to poly(ethylene terephthalate), and that polyimide was more resistant to the ablation than PET due to rigid skeleton of imide and stable phenyl ring structure.

• Membrane Journal
• /
• v.13 no.2
• /
• pp.110-117
• /
• 2003

Sulfonated polyimides had been utilized and studied widely as available materials in chloro-alkali electrolysis, cationic exchange resins, and so on. However, a slow decrease in performance during experiments had been reported, which could be attributed to a loss of ionic conductivity related to either a continuous dehydration or polymer degradation. One of main reasons to account for the degradation of sulfonated polymers is the hydrolysis leading to polymer chain scission and decrement of molecular weight. Therefore, the objective of our study was to investigate possible imide cycle and additional ester bond cleavage connected with $SO_3$H presence under hydrated condition. In order to confirm and obtain as clear information as possible about breakages of bonds via $^1H\; and \;^{13}C$ NMR and IR spectroscopic analyses, our study was performed by model compound. Consequently, model compounds with both phthalic and naphthalenic imide ring and ester bonds were synthesized to evaluate the hydrolysis stability of sulfonated polyimide. The experiments were performed for prepared model compounds before and after aging in deionized water at $80^{\circ}C$ and were terminated by lyophilization technique. The aging products were finally analyzed by NMR and IR spectroscopy.

• Journal of the Korean Chemical Society
• /
• v.40 no.12
• /
• pp.711-718
• /
• 1996

The relationship between chemical structure and antifungal activity of benzene ring substituents of 1-phenylpyrrolidine-2,5-diones is studied by testing of model compounds and use of conformational data. The analysis revealed a number of structural features as essential for the antifungal effect: (1) the presence of an intact-NCO group and benzene moiety; (2) the distance between para substituents and the N atom within the 5.318∼5.320 ${\AA}$ range; (3) the distance between substituent X3 and X5 in the interval 5.437∼6.072 ${\AA}$ for the active analogues. And other parameters were discussed.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.420-430
• /
• 2013

Polymer blends were prepared by solution blending poly(amic acid) (PAA) and poly(o-hydroxy amide) (PHA) having imide groups in the main chain. The polymers and their blends were characterized by using FTIR, FT NMR, DSC, TGA, SEM, XRD, UTM, and LOI. The solubility study revealed that the blends were readily soluble in aprotic solvents such as DMF, DMAc, DMSO, and NMP. The maximum weight loss of the blends occurred in the range of $578-645^{\circ}C$, and the maximum weight loss temperature increased with increasing the PHA content. The PBO/PI blends showed relatively high char yields (i.e. 56-69 wt%). The LOI values of the blends were in the range of 24.5-28.1% and increased with increasing the PHA content. The initial modulus and tensile strength of the blends increased by 57 to 121% and by 67 to 107%, respectively, compared to the values of PAA. Especially the initial modulus and tensile strength of the PHA/PAA=2/8(wt/wt) showed the highest values of 4.87 GPa and 108 MPa, respectively. The PHA domains of $0.03-0.1{\mu}m$ in their size were more or less uniformly dispersed. The interfacial adhesion between PAA and PHA was found to be good.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.

• Applied Biological Chemistry
• /
• v.39 no.3
• /
• pp.235-240
• /
• 1996

The most stable stereo conformer in non substituted benzenesulfonyl urea, 1 was the II-keto form, which the molecule was intramolecular associated(H-bond) coformer between imide group and N atom on the Pyrimidine ring. The hydrolytic degradation of 2 derivatives were proceeds by nucleophilic addition reaction(p<0) with orbital controlled intermolecular interaction between LUMO with electron donating$(\sigma<0)$ groups of 2 and HOMO of water molecule. N-(4,6-disub. pyrimid ine-2-yl)aminocarbonyl-2-(1,1-dimethoxy-2-fluoro)ethylbenze nesulfonamides,3 and N-(4,6-disub. triazine-2-yl)aminocarbonyl-2-(1,1-d imethoxy-2-fluoro)ethylbenzenesulfonamides,4 we re synthesized and their herbicidal activities in vivo against bulrush (Scirpus juncoides.) were measured by the pot test under the paddy conditions And the structure activity relationships(SAR) were analyzed by the multiple regression technique. The results of the SAR suggested that the 3 and 4 derivatives indicated dependent on the hydrophobicity of the 4,6-disubstituents and the heterocyclo group, where the optimal value $((log\;P)_{opt.}=0.89)$ of hydrophobicity was 0.89. The pyrimidine substituents, 3 showed higher herbicidal activity than the triazine substituents, 4. Among them, 4,6-dimethoxypyrimidine substituent, 3a showed the best herbicidal activity.