• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.342-352
• /
• 2003

Idle NVH characteristics are one of the most important aspects among the vehicle performances. Vehicle developers are devoted to improve vehicle interior noise and steering wheel and seat vibrations. In order to improve the idle quality, noise and vibration transfer path should be carefully evaluated. Also, effects of various components related to the idle performance should be confirmed. A general procedure for improving the idle qualify is described in detail. The relationship among cylinder pressure characteristics, crankshaft rotational speed variation, and vehicle vibrations is also investigated. Influences of drive shaft, torque converter, air conditioning system, vehicle structure including engine mount system, and idle control parameters on the vehicle idle quality are studied. Weak points of typical vehicles on the idle qualify are identified. Some of improvement measures are proposed and verified.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.145-154
• /
• 2017

Industrial paradigm change and awareness change based on development of transportation and communication technology, many idle facilities had been occurred. These idle facilities become the factor which hinder image and environment of the surroundings. In recent years, social, cultural and economic value of idle facilities has been acknowledged and is regarded as an object of rehabilitation as part of urban problem solving. The purpose of this study is to analyze the characteristics of recycling design in the exhibition space used as a domestic idle facility and to utilize it as a basic data for creating an exhibition space using idle facilities in the future. The scope of the study was selected from 8 cases which were reproduced as exhibition space within the last 10 years mainly in Seoul and metropolitan area. It is analyzed by five characteristics of historicity, symbolism, preservability, connectivity, and placeness that are analyzed by the characteristics of rehabilitaion design. The conclusion is as follows. First, idle facilities can be divided into idle industrial facilities and idle non - industrial facilities. Second, the analysis of the characteristics of rehabilitaion design of idle facilities showed that the symbolism was much higher than other rehabilitaion design characteristics. Third, as a result of comparative analysis between idle industrial facility exhibition space and idle non - industrial facility exhibition space, historicity, preservability, and connectivity were high in the idle industrial facility exhibition space. In the exhibition space of idle non-industrial facilities, symbolism and placeness were high.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1148-1160
• /
• 2001

An electronic control system of the automobile engine for optimal start and idle speed control has been developed. This system employs the microcoputer-based electronic control unit and crank angle sensor for precise control on fuel injection, ignition timing, and idle speed more quickly and accurately at the start and idling. Consequently, the number of misfire can be reduced during been affected by air flow rate, idle quality(roughness), spark timing, fuel injection, water temperature, and load, Thus, this electronic control system strivers to reach the optimal idle operating point, defined the lowest idle speed(fuel economy) and idle quality(roughness), under any engine operating conditions.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.509-512
• /
• 2013

An inappropriate space zoning plan causes the unnecessary transportation of construction material and equipment among work areas and increases the disorder of work space. Space zoning is an essential operation management technique which contributes to reduce the process and/or operation idle-time. This paper introduces a method that computes the idle-times between construction operations (or processes) by using Web-CYCLONE. It allows computing with idle-times that affect the construction productivity. Using the idle time between operations and between processes, it computes the optimal number of zones and finds the optimal combination of zones that minimize the idle times. The method contributes to minimize the idle times relative to the operation schedule using complete enumeration. This paper presents the system prototype in detail. A case study is presented to demonstrate the system and verifies the validity of the model. It allows a project manager to establish space zoning plan that effectively segregates a project into optimal number of construction zones and to assign the constrained resources (e.g., laborer, equipment).

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.91-104
• /
• 2014

Self-sufficiency rate of food in South Korea is almost at the lowest level among OECD countries, and the decrease tend of farmland is expected to be continued. In this situation, Korea experienced a rapid change in the international price of grain due to changes in amount of grain production and food weaponization. It also started to reinforce the appropriateness of maintenance of farmland above certain standard. As one of policy means for this situation, this study selected "the use of idle farmland" as a subject, and started to consider the way to suggest the policy projects using idle farmland. The result of this study is summarized as follows. Firstly, this study defined the meaning of idle farmland, and set up the scope of idle farmland needed to this study. Secondly, this study analyzed the domestic major policy projects with prevention function of idle farmland as well as the policy projects related to idle farmland. It also investigated "recycling measures of idle farmland" that is recently promoted in Japan, and deducted the direction for developing a new model. Lastly, It suggested 9 policy project models that are finally able to use idle farmland. Suggested models are designed to access from various directions. This study suggested contents, entity, target and characteristics of projects in order to set up proper directions in promoting policy projects using idle farmland.

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.480-491
• /
• 2010

Along with the wide acceptance of IEEE 802.11 wireless local area network (WLAN), new applications such as Internet protocol (IP) telephony over WLAN are fast emerging today. For battery-powered IP phone devices, the life time extension is a key concern for the market acceptance while today's 802.11 is not optimized for snch an operation. In this paper, we propose a novel idle mode operation, which comprises paging, idle handoff, and delayed handoff. Under the idle mode operation, a mobile host(MH) without any active session does not need to perform handoff within a predefined paging area (PA). Only when it enters a new PA, an idle handoff is performed. The proposed idle mode allows an MH without traffic to extend its life time. We develop a new analytical model in order to comparatively evaluate our proposed scheme. The numerical resnlts demonstrate that the proposed scheme outperforms the existing schemes with respect to power consumption.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.89-95
• /
• 2000

The engine idle speed mode becomes worse as one drives a vehicle for several years. This is due to ageing of engine and power-train parts. In this case, unstable idle conditions such as engine stall and droop are frequently experienced when the engine gets heavy torque loads due to power steering pump and air conditioning compressor. The objective of this paper is to study on the idle speed control using PID controller under load disturbances. The input of the PID controller is an error of rpm. The output of the PID controller is an ISCV duty cycle. The dSPACE Controller Boards are used to interface with engine. The on-vehicle test is realized using by SIMULINK and BLOCKSETS tools. The real time interface control panel supplied by Control Desk S/W is designed to have good results in engine idle speed control.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.161-167
• /
• 2001

This paper presents an approach to nonlinear engine idle controller and intake manifold absolute pressure(MAP) observer based on mean torque production model. A stable engine idle speed is important in that the unstable engine Idle mode can make engine to drooping or stall state. A sliding fuzzy controller has been designed to control engine idle speed under load disturbance. A sliding observer is also developed to estimate the intake manifold absolute pressure and compared with the actual MAP sensor value. The sliding mode observer has shown good robustness and good tracking performance. The inputs of sliding fuzzy controller are the errors of rpm and MAP. The output is a duty cycle(DC) for driving a idle speed control valve(ISCV).

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2019

In recent years, information collection of attacks through stealth port scanning technology has become more sophisticated. The most commonly used Nmap port scanner supports a variety of stealth scanning technologies along with the existing scanning techniques. Nmap also supports Idle scan that is different from conventional stealth scans. This is a more sophisticated stealth scan technique by applying the SYN scan and ACK scan techniques. In previous studies, the detection of Idle scanning was on zombie system, but was not on victim system. In this paper, we propose an effective detection method of Idle scan on victim system. The Idle scanning is composed of two stages; they are probing the zombie and victim system and scanning the victim system. We analyzed the characteristics of the two stages. The characteristics, we captured, are that SYN and RST packets are different from normal packet. We applied them to detection method, then Idle scanning is detected effectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.152-161
• /
• 2007

IEEE 802.11 Wireless Local Area Network (WLAN) became a prevailing technology for the broadband wireless Internet access, and new applications such as Voice over WLAM (VoWLAN) are fast emerging today. For the battery-powered VoWLAN devices, the standby time extension is a key concern for the market acceptance while today's 802.11 is not optimized for such an operation. In this paper, we propose a novel Idle Mode operation, which comprises paging, idle handoff, and delayed handoff. Under the idle mode operation, a Mobile Host (MH) does not need to perform a handoff within a predefined Paging Area (PA). Only when the MH enters a new PA, an idle handoff is performed with a minimum level of signaling. Due to the absence of such an idle mode operation, both IP paging and Power Saving Mode (PSM) have been considered the alternatives so far even though they are not efficient approaches. We implement our proposed scheme in order to prove the feasibility. The implemented prototype demonstrates that the proposed scheme outperforms the legacy alternatives with respect to energy consumption, thus extending the standby time.