• Communications of the Korean Mathematical Society
• /
• 제33권2호
• /
• pp.639-650
• /
• 2018

Finding a solution for the Legendre equation is difficult. Especially if it is as a part of the Laplace equation solving in the electric fields. In this paper, first a problem of the generalized differential transform method (GDTM) is solved by the Sturm-Liouville equation, then the Legendre equation is solved by using it. To continue, the approximate solution is compared with the nth-degree Legendre polynomial for obtaining the inner and outer potential of a sphere. This approximate is more accurate than the previous solutions, and is closer to an ideal potential in the intervals.

• Journal of Chest Surgery
• /
• 제23권6호
• /
• pp.1084-1089
• /
• 1990

Plasma protein concentration, plasma albumin concentration, hematocrit, and arterial blood gas tension were measured in 15 mongrel dogs undergoing heart transplantation with cardiopulmonary bypass. The hemodilution due to priming solution resulted in a 49% decrease in plasma protein concentration, a 57% decrease in plasma albumin concentration, a 46%a decrease in hematocrit. The measurements had returned to preperfusion values 1 hour after the end of cardiopulmonary bypass. The intraoperative changes in plasma protein and albumin concentration did not correlate with changes in alveolar-arterial oxygen tension gradients[D[A\ulcorner PO2]]. It is concluded that, in the absence of an increase in left atrial pressure, marked decrease in plasma protein concentration can be tolerated without the occurrence of pulmonary edema. And further study should be done to determine how to prepare an ideal priming solution.

• Proceedings of the Membrane Society of Korea Conference
• /
• 한국막학회 1995년도 제3회 심포지움 (분리막 연구의 최신동향)
• /
• pp.73-85
• /
• 1995

The asymmetric hollow fiber membranes were prepared by the wet spining of polyetherimide dope solution and the effect of hollow fiber structures on the permeation characteristics of carbon dioxide and nitrogen gases through these membrane were investigated. As the concentration of the $\gamma$-butyrolactone (GBL) in dope solution, acting as a swelling agent was increased, the structure of hollow fiber was changed from the finger to sponge type. The permeabilities of gases (CO$_{2}$, N$_{2}$) through these membrane were measured over the wide range of pressure under different temperature. The effect of water vapor on the permeabilities of gases was also investigated. The measured permeabilities showed the different characteristics depending on the structure of membranes. It was found that the flow through the pores were dominant over the polymers matrix. Blocking effect by water vapor in the pores of skin layer greatly improved the ideal separation factor of carbon dioxide/nitrogen.

• Journal of Information Technology Applications and Management
• /
• 제19권3호
• /
• pp.19-30
• /
• 2012

Material selection is a complex problem in the design and development of products for diverse engineering applications. This paper is aimed to present a fuzzy decision making approach to deal with the material selection in engineering design problems. A fuzzy multi criteria decision-making model is proposed for solving the material selection problem. The proposed model makes use of fuzzy TOPSIS (Technique for Order reference by Similarity to Ideal Solution) with trapezoidal numbers for evaluating the criteria and ranking the alternatives. And result is compared with fuzzy VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje in Serbian, means Multi criteria Optimisation and Compromise Solution) which is proposed by Jeya Girubha and Vinodh [2012]. The present paper is aimed to also improve literature of fuzzy decision making for material selection problem.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.572-574
• /
• 2014

Researches on three-dimensional multimedia has been performed actively in recent years. Virtual sound technology corresponding to virtual image should be provided to implement 3D multimedia with high quality. Head-related transfer function (HRTF) plays a key role in this research area. HRTFs measured in changing azimuth, elevation, and distance for each and every subject is necessary for ideal solution. However, it is practically impossible to measure all subjects' HRTFs, so various HRTF databases have been built by many researchers. Because HRTF displays quite different aspects from subject to subject, HRTF of dummy head has been used for generic usage. However, mannequin's HRTF showed much worse performance comparing with individual case so this solution should be improved. From previous work, standardization of HRTF based on tensor-singular value decomposition method has been proposed. For effective extraction of standard HRTF, three different decomposition methods are compared in this paper.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제22권50호
• /
• pp.333-340
• /
• 1999

An ideal traffic control system should consider simultaneously both route guidance of vehicles and signal policies at intersection of a traffic network. It is known that an iterative procedure gives an optimal route to each vehicle in the network. This paper presents an iterative procedure to find an optimal signal plan for the network. We define the optimal solution as a signal equilibrium. From the definition of signal equilibrium, we prove that the fixed point solution of the iterative procedure is a signal equilibrium, when optimal signal algorithms are implemented at each intersection of the network. A combined model of route guidance and signal planning is also suggested by relating the route guidance procedure and the signal planning procedure into a single loop iterative procedure.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.313-334
• /
• 2012

This paper examines the problem of a penny-shaped crack in a thermoporoelastic body. On the basis of the recently developed general solutions for thermoporoelasticity, appropriate potentials are suggested and the governing equations are solved in view of the similarity to those for pure elasticity. Exact and closed form fundamental solutions are expressed in terms of elementary functions. The singularity behavior is then discussed. The present solutions are compared with those in literature and an excellent agreement is achieved. Numerical calculations are performed to show the influence of the material parameters upon the distribution of the thermoporoelastic field. Due to its ideal property, the present solution is a natural benchmark to various numerical codes and simplified analyses.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제33권2호
• /
• pp.1-8
• /
• 2010

A vendor selection problem consists of two different kinds of decision making. First one is to choose the best suppliers among all possible suppliers and the next is to allocate the optimal quantities of orders among the selected vendors. In this study, an integration of the technique for order preference by similarity to ideal solution (TOPSIS) and a multi-objective mixed integer programming (MOMIP) is developed to account for all qualitative and quantitative factors which are used to evaluate and choose the best group of vendors and to decide the optimal order quantity for each vendor. A solution methodology for the vendor selection model of multiple-vendor, multiple-item with multiple decision criteria and in respect to finite vendor capacity is presented.

• Journal of the Korean Ceramic Society
• /
• 제35권10호
• /
• pp.1049-1054
• /
• 1998

In order to fabricate ideal powders new processing is necessary in which the solute atoms in solution ra-pidly move to mix each other to the degree of molecular level the viscosity of solution should be low not to effect the moving of solute atoms and the powders could be directly obtained as crystalline. Supercritical fluid is defined as condensed gas sated up to its critical pressure and temperature. In this paper su-percritical fluid methods were studied as a new ceramic processing of powder preparation. The crystalline powders of TiO2 which are useful for electronic ceramic materials were fabricated by hydrolysis of titanium (IV) ethoxide using ethanol as a supercritical fluid at the condition of 270$\pm$3$^{\circ}C$, 7.3 MPa for 2hr. The cry stalline anatase powders could be directly obtained and its primary particle size was 20 min.

• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.615-619
• /
• 2009

(+)-$Tr{\ddot{o}}ger$'s base in $Tr{\ddot{o}}ger$'s base racemates that inhibits thromboxane A2($T{\times}A2$) synthase has been used to treat arteriosclerosis. Separation of (+)-$Tr{\ddot{o}}ger$'s base by chromatography has become a major concern. However separation experiments of (+)-$Tr{\ddot{o}}ger$'s base need time and consumables so that simulation with Aspen Chromatography could save time and costs by predicting the efficiency of separation. Injection amount and eluent flow rate were varied to compare the resolutions and yields of TB(-) and TB(+). Highest resolution and yield were attained at the eluent rate of 0.25 mL/min. Isotherms representing the relationship between mobile phase concentration and stationary phase concentration were changed to get the best separation with Ideal Adsorbed Solution(IAS) Statistical Lanmuir isotherms.