• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.5 no.3
• /
• pp.291-299
• /
• 2015

With recent surge of attention to heating and air conditioning energy consumption, the need for evaluating performance of heating and air conditioning energy is also on the rise. This research aims to propose daily-life based evaluation method as an alternative to existing one, as well as to apply the method in real life to prove its validity. The results are as following. 1) I studied temperatures preferred by persons indoors and appropriate level of temperature, and the results show that properties of such persons such as age is directly linked with pleasantness of the room, but the issue lies with the fact that such properties are not considered in existing performance evaluation of heating and air conditioning. 2) Daily life based evaluation proposed herein reflects such properties of persons indoors. It controls heating / air conditioning devices installed in the test bed with the same size as a real life room to get quantitative and visual performances in our daily life as well as simple temperature information. 3) To verify validity of daily life based evaluation, I conducted different evaluation sessions with and without a blind and also based on ages of persons indoors. Results based on properties of persons showed difference of 77.6%, leading to effective analysis of energy consumption pattern by heating / air conditioning devices. This research takes significance in that it comes with a new performance evaluation method based on real life, and I gather that further studies are required to develop more multilateral performance evaluation in order to verify and improve technology for reduction of energy consumption.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.133-137
• /
• 2017

The purpose of this study was to validate for GATE (Geant4 Application for Tomographic Emission) simulation by comparing the results of GATE simulation and experiment in real SPECT system. Futhermore, we want to prove that it is possible that the quantitative research of gamma camera/SPECT imaging for therapeutic radio isotope by using GATE simulation. In this study, the SPECT system on simulation referred to the parameters of Stream-R Forte version 1.2 (Philips Medical System, Best and Heerlen, Netherlands). To understand the I-131 image of gamma camera/SPECT system, we acquired the energy spectrum and measured the full width at half maximum (FWHM) which comes from line spread function (LSF) with and without scatter material in real SPECT system. And to compare with experiment, we also measured the FWHM and acquired the energy spectrum without scatter material in GATE simulation. As a result, without scatter material, the energy peak was almost same location, which are located nearby 364 keV, and other spectrum factors are same tendency in both cases. The FWHM was increased by increasing the distance of source to detector, and the error rate was approximately 3.8%. When we used the line source with scatter material, energy spectrum also indicated similar tendency in both cases. As you confirmed earlier, GATE simulation included real instrument and radioisotope characters for therapeutic radioisotope. Therefore this result that it was possible that various quantitative study for therapeutic radioisotope imaging in gamma camera/SPECT using GATE simulation.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.247-252
• /
• 2007

The container crane is one of the most important equipments at container terminal. If its working time in cycle could be reduced then container terminal efficiency and service level can be increased. So there are many i1forts to reduce working time of container cranes. It means how to design the controller with good performance which has small overshoot and swing motion of container crane. We, in this paper, present a state feedback controller based on LQ theory incorporating a RCGA which means real-coded genetic algorithm RCGA can search state feedback gains under given objective function. A set of simulation works are carried out in order to prove the control effectiveness of the proposed methods.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.11-22
• /
• 2006

The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

• The Plant Pathology Journal
• /
• v.20 no.3
• /
• pp.212-219
• /
• 2004

Three isolates of Cucumber mosaic virus (CMV) from lily plants showing mosaic and distortion symptoms were detected by reverse-transcriptase polymerase chain reaction (RT-PCR) using primers specific to Cucumovirus genus namely, LK-CMV, LK4-CMV, and LKS-CMV. Restriction enzymes patterns of the RT-PCR products revealed that the lily isolates belonged to subgroup IA of CMV. In terms of biological properties, the lily isolates have highly similar but distinct pathogenicity as reported in other lily strains and ordinary strains of CMV. To characterize the molecular properties, cDNAs containing coat protein (CP) gene and 3' non-coding region (NCR) of RNA3 for the isolates were cloned and their nucleotide sequences were determined. The CP similarity (218 amino acids) was highly homologous (>97％) with that of subgroup I CMV strains. However, an additional 20-nulcleotide long segment was only present in 3' NCR of lily isolates, which form an additional stem-loop RNA structure. By using chimeric construct exchange cDNA containing 3'NCR of LK-CMV into the full-length cDNA clone of RNA3 of Fny-CMV, this additional segment may prove to be significant in the identification and fitness of the virus in lily plants. The pathology of zucchini squash infected by F1F2L3-CMV, a pseudorecombinant virus was showed to change drastically the severe mosaic and stunting symptom into a mild chlorotic spot on systemic leave, compared with Fny-CMV. To delimit the sequence of RNA3 affected the pathology, various RNA3 chimeras were constructed between two strains of CMV. The symptom determinants of F1F2L3-CMV were mapped to the positions amino acid 234, 239, and 250 in 3a movement protein (MP). RNA3 chimeras changed the sequences encoding three amino acids were resulted in alteration of systemic symptom.

• Journal of the Korean Mathematical Society
• /
• v.50 no.5
• /
• pp.1105-1127
• /
• 2013

Let C[0, $t$] denote the function space of real-valued continuous paths on [0, $t$]. Define $X_n\;:\;C[0,t]{\rightarrow}\mathbb{R}^{n+1}$ and $X_{n+1}\;:\;C[0,t]{\rightarrow}\mathbb{R}^{n+2}$ by $X_n(x)=(x(t_0),x(t_1),{\ldots},x(t_n))$ and $X_{n+1}(x)=(x(t_0),x(t_1),{\ldots},x(t_n),x(t_{n+1}))$, respectively, where $0=t_0 <; t_1 <{\ldots} < t_n < t_{n+1}=t$. In the present paper, using simple formulas for the conditional expectations with the conditioning functions $X_n$ and $X_{n+1}$, we evaluate the $L_p(1{\leq}p{\leq}{\infty})$-analytic conditional Fourier-Feynman transforms and the conditional convolution products of the functions, which have the form $fr((v_1,x),{\ldots},(v_r,x)){\int}_{L_2}_{[0,t]}\exp\{i(v,x)\}d{\sigma}(v)$ for $x{\in}C[0,t]$, where $\{v_1,{\ldots},v_r\}$ is an orthonormal subset of $L_2[0,t]$, $f_r{\in}L_p(\mathbb{R}^r)$, and ${\sigma}$ is the complex Borel measure of bounded variation on $L_2[0,t]$. We then investigate the inverse conditional Fourier-Feynman transforms of the function and prove that the analytic conditional Fourier-Feynman transforms of the conditional convolution products for the functions can be expressed by the products of the analytic conditional Fourier-Feynman transform of each function.

• Smart Structures and Systems
• /
• v.25 no.2
• /
• pp.241-254
• /
• 2020

Using confined shape memory alloy (SMA) bar or plate, this study proposes an innovative self-centering damper. The damper is essentially properly machined SMA core, i.e., bar or plate, that encased in buckling-restrained device. To prove the design concept, cyclic loading tests were carried out. According to the test results, the damper exhibited desired flag-shape hysteretic behaviors upon both tension and compression actions, although asymmetric behavior is noted. Based on the experimental data, the hysteretic parameters that interested by seismic applications, such as the strength, stiffness, equivalent damping ratio and recentering capacity, are quantified. Processed in the Matlab/Simulink environment, a preliminary evaluation of the seismic control effect for this damper was conducted. The proposed damper was placed at the first story of a multi-story frame and then the original and controlled structures were subjected to earthquake excitations. The numerical outcome indicated the damper is effective in controlling seismic deformation demands. Besides, a companion SMA damper which represents a popular type in previous studies is also introduced in the analysis to further reveal the seismic control characteristics of the newly proposed damper. In current case, it was found that although the current SMA damper shows asymmetric tension-compression behavior, it successfully contributes comparable seismic control effect as those having symmetrical cyclic behavior. Additionally, the proposed damper even shows better global performance in controlling acceleration demands. Thus, this paper reduces the concern of using SMA dampers with asymmetric cyclic behavior to a certain degree.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.40-47
• /
• 2015

This paper discusses QoS enhancement in the Best-effort services of the service plan provided by MPEG Media Transport (MMT) systems for video streaming applications. Among MMT services, i.e. per-flow, per-class, and best-effort services, the server does not provide guaranteed bandwidth for the best-effort service only. Therefore, in the best-effort services, a bandwidth access priority is defined for various services, where the lowest priority is assigned to the low-level video services. To alleviate the issue of bandwidth limitation in the best-effort services, this paper investigates transmission of low-resolution video with low bitrate and up-sampling. Our experimental results prove the superiority of the proposed method in terms of delivered video quality.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2017

This study conducted Testing, Adjusting, and Balancing (TAB), which is a type of field performance evaluation experiment of a zone smoke-control system, at a railway underground transit passage installed with a zone smoke- control system to find problems and improvements for ensuring performance. TAB for the smoke control system was classified into several procedures, such as design data review, duct leakage test, field measurement of the airflow rate, velocity of the fan and duct, and a smoke test. Through the duct leakage test, the system leakage ratio was examined to prove the duct sealing. The iImprovement of the smoke control airflow problems due to the lack of fan static pressure loss was the secured performance. The performance of the smoke control fan was secured by improvements of the smoke control airflow rate problems caused by the loss of static pressure in the intake duct. The smoke test in the smoke control zone confirmed that the damper operating schedule subject was influenced by natural wind or train wind.

• Animal Systematics, Evolution and Diversity
• /
• v.34 no.3
• /
• pp.127-142
• /
• 2018

A new species of Eudactylopus Scott A., 1909 is described from the southern coast of Korea. The specimens were collected using a light trap set overnight at the entrance near a pier. Eudactylopus yokjidoensis n. sp. is similar to E. andrewi Sewell, 1940 and E. spectabilis (Brian, 1923) in two key respects: similar length of proximal and distal inner setae on female P2 enp-2, and modification of two subapical setae on male P2 endopod. However, E. yokjidoensis can be differentiated from the two species by following morphological characteristics: in females, the length ratio of cephalothorax/2nd-4th thoracic somites combined is smaller in E. yokjidoensis than other two species (1 : 0.8 vs. 1 : 1); antennule has nine segments (vs. 7-segmented in E. andrewi); P2 to P4 each bears a process in medial distal margin of basis, while it is just smooth in E. spectabilis; in males; the length ratio of cephalothorax to 2nd-4th thoracic somites combined is smaller in E. yokjidoensis than other two species (1 : 0.6 vs. 1 : 1 in E. andrewi and 1 : 0.8 in E. spectabilis); and P5 exopod has a comb-like innermost seta, while it is bipinnate seta in E. spectabilis. To prove the Korean species of Eudactylopus to be new, full descriptions of both sexes are given here, and the claim is supported by distinct genetic differences between E. yokjidoensis and E. spectabilis (22.3-22.7%) in the mitochondrial gene cytochrome oxidase subunit I(mtCOI) sequence.