• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4057-4064
• /
• 2014

In this paper, attempts were made to design a preform for a final punch inexpensively using the proposed approximate optimization method or metamodel-based simulation optimization. The design objective of this work is to achieve a uniform distribution of effective strains, the angle dimension of the preformed punch is chosen as a design variable, and maximum underfill ratio is used as a constraint. For this optimization, a computer simulation of a practical punch forging process is run using DEFORM software, in which a preformed punch(workpiece), a master punch(upper die), and a bottom die are dealt with. A validation method is introduced to determine if the simulation results match the actual forging process. In addition, this work presents the detailed design optimization procedure consisting of (i) generation of an initial metamodel, (ii) metamodel optimization, (iii) validation of metamodel-predicted optimum, and (iv) metamodel improvement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1209-1218
• /
• 2016

In order to safely and speedily transport a load such as a large glass plate using four electric cylinders, the synchronous error outside the permitted range should not be continuously generated between the cylinders. In this study, a methodology of synchronous control which can be applied to synchronization of four or more cylinders is developed. The synchronous control system based on the decoupling structure is composed of a reference model, position and synchronous controllers in the respective cylinders. The reference model is used for calculating the decoupled synchronous error and control input for the each cylinder. The position controller of I-PD type is designed in order that the cylinder may follow the reference signal without overshoot and input saturation. And the synchronous controller of lead compensator is designed to achieve stable and accurate synchronization through loop shaping approach. Finally, the simulation results show that the synchronization between the four cylinders can be quickly and stably while each cylinder rod is transferred to the target point under torque disturbance.

• Fire Science and Engineering
• /
• v.13 no.3
• /
• pp.35-42
• /
• 1999

A occupant load density of contemporary office buildings were surveyed by a building w walk through procedure in Korea. The survey results of ten office buildings are range from 1 2 2 2 213.14 m !person 041.4 ft !person) to 22.69 m /person (244.34 ft !person) with 95% confidence l level and the mean occupant load density is 17.92 m2/person 092.87 ft2/야rson). The impacts of occupant load on evacuation flow time was analyzed by applying time-based egress m model, SIMULEX with various occupant load densities from previous studies. I In order to demonstrate the validation of egress modeling method, fire evacuation exercise a and computer simulation were used to simulate the actual evacuation plan for a high-rise office building. An analysis and comparison of the results of these approaches was made to i illustrate the influence of model limitations on the result of prediction The result of the study shows that the introduction of occupant load concept in building c code of Korea is essential to achieving resonable building life safety design in future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.29-35
• /
• 2023

In this paper, we propose a SW-EDU bot, a chatbot learning model for coding education by using a chatbot system. The same scenario-based models are created on the basis of Dialogflow and Kakao i Open Builder, which are representative chatbot builders. And then a SW-EDU bot is designed and implemented by selecting the builder more appropriate to our purpose. The implemented chatbot system aims to learn effective learning methods while encouraging self-direction of users by providing learning type selection, concept learning, and problem solving by difficulty level. In order to compare the usability of chatbot builders, five indicators are selected, and based on these, a builder with a comparative advantage is selected, and SW-EDU bot is implemented based on these. Through usability evaluation, we analyze the feasibility of SW-EDU bot as a learning support tool and confirm the possibility of using it as a new coding education learning tool.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.77-84
• /
• 2024

In the fourth industrial-revolution era, the construction industry is transitioning from traditional methods to digital processes. This shift has been challenging owing to the industry's employment of diverse processes and extensive human resources, leading to a gradual adoption of digital technologies through trial and error. One critical area of focus is the safety management at construction sites, which is undergoing significant research and efforts towards digitization and automation. Despite these initiatives, recent statistics indicate a persistent occurrence of accidents and fatalities in construction sites. To address this issue, this study utilizes large-scale language-model artificial intelligence to analyze big data from a construction safety-management information network. The findings are integrated into on-site models, which incorporate real-time updates from detailed design models and are enriched with location information and spatial characteristics, for enhanced safety management. This research aims to develop a big-data-driven safety-management platform to bolster facility and worker safety by digitizing construction-site safety data. This platform can help prevent construction accidents and provide effective education for safety practices.

• Journal of the Korean School Mathematics Society
• /
• v.15 no.4
• /
• pp.643-671
• /
• 2012

The purpose of this study was to examine How the exploratory activities using Excel and GSP which are exploratory software, in learning analytic geometry affected on the underachievers' analytic geometry concept development process. The subjects of 5 students who received the 8th~9th grades from their examination of the last semester, participated in a total of 7 units based on Skemp's intelligent learning model. The results of the study showed that there were two important cases found to nearly achieve the category $R_2$. One was reflective thinking could happen through exploratory software in category $R_1$. The other was the exploratory activities which could have the same effectiveness as the relational understanding in category $I_2$, as Skemp mentioned that there is a room to be achieved in the elementary level when such relational understanding is achieved.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.10
• /
• pp.461-470
• /
• 2023

While speech animation generation employing deep learning has been actively researched for English, there has been no prior work for Korean. Given the fact, this paper for the very first time employs supervised deep learning to generate Korean speech animation. By doing so, we find out the significant effect of deep learning being able to make speech animation research come down to speech recognition research which is the predominating technique. Also, we study the way to make best use of the effect for Korean speech animation generation. The effect can contribute to efficiently and efficaciously revitalizing the recently inactive Korean speech animation research, by clarifying the top priority research target. This paper performs this process: (i) it chooses blendshape animation technique, (ii) implements the deep-learning model in the master-servant pipeline of the automatic speech recognition (ASR) module and the facial action coding (FAC) module, (iii) makes Korean speech facial motion capture dataset, (iv) prepares two comparison deep learning models (one model adopts the English ASR module, the other model adopts the Korean ASR module, however both models adopt the same basic structure for their FAC modules), and (v) train the FAC modules of both models dependently on their ASR modules. The user study demonstrates that the model which adopts the Korean ASR module and dependently trains its FAC module (getting 4.2/5.0 points) generates decisively much more natural Korean speech animations than the model which adopts the English ASR module and dependently trains its FAC module (getting 2.7/5.0 points). The result confirms the aforementioned effect showing that the quality of the Korean speech animation comes down to the accuracy of Korean ASR.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.585-596
• /
• 2006

This study focuses on the seismic behavior of 3-, 9-, and 20-story steel moment resisting frame (MRF) structures designed in accordance with the 2000 International Building Code using different Response Modification factors (R factors), i.e., 8, 9, 10, 11, and 12. For a detailed case study, 30 different structures were evaluated for 20 ground motions representing the hazard level, which is equal to a 2% probability in 50 years (2% in 50 years). The results showed that the current R factors provide conservative designs for the 3- and 9-story buildings for the Collapse Prevention performance objective. the 20-story buildings, which were designed without using the minimum requirement of spectral acceleration CS prescribed in IBC 2000, did not satisfy the seismic performance for Collapse Prevention performance.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.61-73
• /
• 2009

Many software reliability growth models(SRGM) have been proposed since the software reliability issue was raised in 1972. The technology to estimate and grow the reliability of developing S/W to target value during testing phase were developed using them. Most of these propositions assumed the S/W debugging testing efforts be constant or even did not consider them. A few papers were presented as the software reliability evaluation considering the testing effort was important afterwards. The testing effort forms which have been presented by this kind of papers were exponential, Rayleigh, Weibull, or Logistic functions, and one of these 4 types was used as a testing effort function depending on the S/W developing circumstances. I propose the methology to evaluate the SRGM using least square estimater and maximum likelihood estimater for those 4 functions, and then examine parameters applying actual data adopted from real field test of developing S/W.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.367-373
• /
• 2017

The study aims to suggests mobile application service that helps to reduce physical and mental suffering after surgery for breast cancer patients constantly increasing. At first, I analyze literature research to understand the breast cancer and similar services for achieving study purposes. After I finally design a mobile application that offers to customed one-to-one specialist coaching service focused on post-treatment management by using a double diamond design process model. In detail, first, I analyze the current program and comprehend user needs through interviews with the person such as breast patient, protector, nurse, salesperson in cancer center. Second, I specify the entire scenario, concept and keyword based on the persona and the customer journey map representing user. Third, I propose the mobile application for the ultimate goal by producing prototype to effectively communicate with specific functional descriptions. I hope this service will improve the quality of their lives.