• 한국조명전기설비학회지:조명전기설비
• /
• 제10권3호
• /
• pp.71-77
• /
• 1996

본 연구는 지중전력 케이블 주변의 자성체로 이루어지는 구조물의 철손에 대해서 연구하였다. 케이블 지지대의 재질은 Fe, FRP, SUS로 바꾸어 Epatein법에 의해서 철손을 측정하여 Hysteresis손을 각각 비교계산하였다. 이 결과는 공급전압이 일정하면 Hysteresis손은 주파수의 0.6승에 반비례하였고, 최대자속밀도를 일정하게하고, 주파수를 60[Hz]에서 50[Hz]로 변경하던 철손은 약 0.806배가 되었다. Fe의 경우, Hysteresis 손은 전체손실의 약 70[%]이상 되었으며 "Loss program"을 이용하여 계산한 결과 SUS가 Fe보다 약 90[%]이상 철손이 감소하였고 계산결과도 SUS, FRP는 "0"에 가까웠다."0"에 가까웠다.ot;에 가까웠다.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.99-103
• /
• 2005

For ac applications a detailed understanding of the ac power losses associated with different conductor configurations is of crucial importance. YBCO thin films were divided into parallel filaments with widths of 1, 2, and 4 mm to reduce hysteresis losses. The measured hysteresis losses show a linear relationship between the strip width and hysteresis loss as anticipated. The influence of different inter-filament separations on the hysteresis loss is investigated.

• Journal of Magnetics
• /
• 제15권3호
• /
• pp.138-142
• /
• 2010

This paper reports the development of an analysis method in a synchronous reluctance motor (SynRM) using the finite element method (FEM) coupled with the electromagnetic field of the Preisach model, which represents an additional thermal source due to hysteresis loss and a thermal field. This study focused on thermal analysis relative to hysteresis and copper losses in a SynRM.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1183-1184
• /
• 2006

Core loss of soft magnetic powder cores have been focused on to achieve high efficiency of power supplies. In this study the effects of crystal grain size on core loss were investigated by changing heat treatment conditions. It was found that core loss is influenced by crystal grain size because eddy current loss decreased and hysteresis loss increased by making crystal grain size smaller, and it is also influenced by particle size.

• 자원리싸이클링
• /
• 제11권5호
• /
• pp.34-38
• /
• 2002

최근 전자기기의 경박단소화로 페라이트 코아의 사용주파수가 고주파화 되고 있다. Mn-Zn ferrites에서 전력손실은 hysteresis loss, eddy current loss, residual loss로 구성되어 있으며, 500 KHz 이상의 주파수 영역에서는 residual loss가 주도적인 손실을 나타낸다. Induction level이 50 mT 이하인 경우 전력손실은 주파수의 3승 이상에 비례하여 증가한다. 작은 grain과 치밀한 미세구조는 고주파 대역에서 eddy current loss를 감소시킬 뿐만 아니라 자속밀도를 증가시켜 Residual loss역시 억제한다. Resonance frequency와 static permeability를 곱한 값이 큰 시편일수록 고주파 영역에서 낮은 전력손실을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.15-17
• /
• 1995

Hysteresis motor is a synchronous machine which has simple structure and self-start characteristic but also has serious difficulties in numerical analysis. In this study, a finite element analysis for hysteresis motor considering the hysteresis characteristics is presented. The hysteresis model is the magnetization-dependent Preisach model which explains hysteresis phenomena very well. From this, we estimate the instantaneous torque, average torque and hysteresis loss of the rotor, considering slot and winding distribution.

• 동력기계공학회지
• /
• 제5권3호
• /
• pp.48-55
• /
• 2001

In many applications. rubber components undergo dynamic stresses or deformations of fairly large magnitude. Since rubbers are not fully elastic, a part of the mechanical energy is converted into heat due to the hysteresis loss. Heat generation without adequate heat dissipation leads to heat build up. i. e. internal temperature rise. The purpose of this paper is to predict temperature rise caused by the hysteresis loss, in a rubber pad subjected to complex dynamic deformation. In this unsteady thermal analysis, the temperature distributions of track components are displayed in contour shapes and the temperature variations of some important nodes are represented graphically with respect to the running time of the tank.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1709-1714
• /
• 2007

This paper proposes a compensating algorithm for the secondary current of the measurement current transformer (CT) that removes the effects of the hysteresis characteristics of the iron-core. The exciting current resulting from the hysteresis characteristics of the core causes an error between the primary current and the secondary current of the measurement CT. The exciting current can be decomposed into the magnetizing current and the core loss current. The core loss current is obtained from the measured secondary current and the core loss resistance. The core flux linkage is calculated by integrating the measured secondary current, and then inserted into the flux-magnetizing current curve to obtain the magnetizing current. The exciting current at every sampling interval is obtained by summing the core-loss and magnetizing currents and then added to the measured current to obtain the correct current. The performance of the proposed algorithm is validated under various conditions using EMTP generated data. The results indicate that the proposed algorithm can improve the accuracy of the measurement CT significantly, and thus reduce the size and the cost of the measurement CT.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1409-1414
• /
• 2013

A new calculation method for iron loss coefficients is proposed by using the Steinmetz equation from Epstein data. The hysteresis loss must have linear characteristic according to the frequency. However, the existing iron loss coefficients are defined by formula of frequency. In this case, the hysteresis loss has non-linear characteristics by frequency. So, in this paper, the iron loss coefficients were defined by a function of the magnetic flux density, and the iron loss calculation is applied for Interior Permanent Magnet Synchronous Motor(IPMSM) of 600(W) and 200(W). The iron loss calculation results and the experimental results are compared according to the various materials.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2017년도 임시총회 및 하계학술연구발표회
• /
• pp.220-220
• /
• 2017