• 자원환경지질
• /
• 제28권1호
• /
• pp.9-17
• /
• 1995

The Kamkye Cu-Pb-Zn-Au-Ag deposits occur as quartz veins that filled fault-related fractures of NW system developed in the Cretaceous Gyeongsang basin. Three major stages of mineral deposition are recognized: (1) the stage I associated with wall rock alteration, such as sericite, chlorite, epidote and pyrite, (2) the early stage II of base-metal mineralization such as pyrite, hematite, and small amounts of sphalerite and chalcopyrite. and the middle to late stage II of Cu-As-Sb-Au-Ag-S mineralization, such as sphalerite, chalcopyrite, galena with tetrahedrite, tennantite, pearceite, Pb-Bi-Cu-S system, argentite and electrum. (3) the stage III of supergene mineralization, such as covellite, chalcocite and malachite. K-Ar dating of alteration sericite is a late Cretaceous ($74.0{\pm}1.6Ma$) and it may be associated with granitic activity of nearby biotite granite and quartz porphyry. Fluid inclusion data suggest a complex history of boiling, cooling and dilution of ore fluids. Stage II mineralization occurred at temperatures between 370 to $220^{\circ}C$ from fluids with salinities of 8.4 to 0.9 wt.% NaCl. Early stage II($320^{\circ}C$, 2.0 wt.% NaCl) may be boiled due to repeated fracturing which opened up the hydrothermal system to the land surface, and which resulted in a base-metal sulfide. Whilst the fractures were opened to the surface, mixing of middle-late stage II ore fluids with meteoric waters resulted in deposition of Cu-As-Sb-Au-Ag minerals from low temperature fluids(${\leq}290^{\circ}C$). Boiling of ore fluids may be occured at a pressure of 112 bar and a depth of 412 m. Equilibrium thermodynamic interpretation of sphalerite-tetraherite assemblages in middle stage II indicates that the ore-forming fluid had log fugacities of $S_2$ of -6.6~-9.4 atm.

• 한국재료학회지
• /
• 제26권5호
• /
• pp.250-257
• /
• 2016

Octahedral $Co_3O_4$/carbon nanofiber (CNF) composites are fabricated using electrospinning and hydrothermal methods. Their morphological characteristics, chemical bonding states, and electrochemical properties are used to demonstrate the improved photovoltaic properties of the samples. Octahedral $Co_3O_4$ grown on CNFs is based on metallic Co nanoparticles acting as seeds in the CNFs, which seeds are directly related to the high performance of DSSCs. The octahedral $Co_3O_4$/CNFs composites exhibit high photocurrent density ($12.73mA/m^2$), superb fill factor (62.1 %), and excellent power conversion efficiency (5.61 %) compared to those characteristics of commercial $Co_3O_4$, conventional CNFs, and metallic Co-seed/CNFs. These results can be described as stemmnig from the synergistic effect of the porous and graphitized matrix formed by catalytic graphitization using the metal cobalt catalyst on CNFs, which leads to an increase in the catalytic activity for the reduction of triiodide ions. Therefore, octahedral $Co_3O_4$/CNFs composites can be used as a counter electrode for Pt-free dye-sensitized solar cells.

• 자원환경지질
• /
• 제31권1호
• /
• pp.1-10
• /
• 1998

Copper mineralization of the Donghwa and Hwanghagsan mines was deposited in hydrothermal quartz veins which filled fissures in Cretacous sedimentary rocks. Ore minerals are pyrite, sphalerite, chalcopyrite, bornite, galena, wittichenite and unidentified Cu-Bi-Pb-Sb-S mineral. On the basis of salinities and homogenization temperatures for fluid inclusions, the Donghwa deposit was deposited from $300^{\circ}C$ to $220^{\circ}C$ with 2.5 to 0.2 wt.% eq. NaCl, and the Hwanghagsan deposits was deposited from $300^{\circ}C$ to $160^{\circ}C$ with 4.0 to 0.0 wt.% eq. NaCl. Evidence of boiling suggests pressure of 170 to 60 bar, these pressures correspond to 1700 m to 600 m. The ${\delta}^{34}S_{H_2S}$ values of the Donghwa deposit (4.8~7.4%) are higher than those of the Hwanghagsan deposit (3.5~4.5%), sulfur isotope compositions indicate that ore fluids partially reacted with meteoric water and wall-rock. Equilibrium thermodynamic interpretation indicates that the temperature versus $fs_2$ of the Donghwa deposit (> $420^{\circ}C$, $10^{-3.2}atm$) is higher condition than that of the Hwanghagsan deposit (> $290^{\circ}C$, $10^{-7.0}atm$). K-Ar ages for biotite granite and quartz porphyry in the study area are 64.7 Ma, and 60.9 Ma, reapectively. Mineralization age using sericite in the Donghwa deposits is 59.8 Ma. Therfore, Copper mineralization in the study area was associated with acidic igneous activity such as biotite granite or quartz porphyry.

• 한국수소및신에너지학회논문집
• /
• 제26권3호
• /
• pp.221-226
• /
• 2015

Ru catalysts supported on $CeO_2$ were synthesized by an impregnation method and characterized by numerous analytical techniques including X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), transmission electron microscopy (TEM), and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). Upon utilization of these catalysts for methane dry reforming with a $CH_4/CO_2$ ratio of 1:1 at different temperatures ranging from 550 to $750^{\circ}C$, the $Ru/CeO_2$ catalysts have shown to be active. In particular, Ru(0.55wt%) supported on $CeO_2$ (1) prepared by a hydrothermal method exhibited excellent activity with the conversion of > 75% at $750^{\circ}C$. In addition, the catalyst also proved to be highly stable for at least 47 h without catalyst deactivation under the dry reforming conditions.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.273-281
• /
• 2020

Constructing and making highly active and stable nanostructured Pt-based catalysts with ultralow Pt loading are still electrifying for electrochemical applications such as water electrolysis and fuel cells. In this study, MoO₃ ribbons (RBs) of few micrometer in length is successfully synthesized via hydrothermal synthesis. Subsequently, 3-dimentional (3D)-silicate layer for about 10 to 15 nm is introduced via chemical deposition onto the pre-formed MoO₃ RBs; to setup the platform for Pt metaldots (MDs) deposition. In comparison with the bare MoO₃ RBs, the MoO₃-Si has served as a efficient solid-support for stabilizing and accommodating the uniform deposition of sub-2 nm Pt MDs. Such a structural design would effectively assist in improving the electronic conductivity of a fabricated MoO₃-Si-Pt catalyst towards MOR; the interfaced, porous and 3D silicate layer has assisted in an efficient mass transport and quenching the poisonous CO_ads species leading to a significant electrocatalytic performance for MOR in alkaline medium. Uniformly decorated, sub-2 nm sized Pt MDs has synergistically oxidized the MeOH in association with the MoO₃-Si solid-support hence, synergistic catalytic activity has been achieved. Present facile approach can be extended for fabricating variety of highly efficient Metal Oxide-Metal Nanocomposite for energy harvesting applications.

• 자원환경지질
• /
• 제47권2호
• /
• pp.107-119
• /
• 2014

NMC 몰랜드 광산은 고생대 조선누층군을 관입한 화성암류에 의해 형성된 접촉교대 또는 스카른 광상으로 공간적으로 제천화강암과 인접해 있어 이 화강암을 관계 화성암으로 간주하여 대보 화성 활동과 관련하여 형성된 광상으로 해석하였으나, 최근에는 백악기 천부 반화강암질 암체에서 기원된 광화유체로부터 스카른화작용과 더불어 Mo 광화작용이 진행된 것이라는 해석이 제시되었다. 본 연구에서는 광산 일원에 대한 중력탐사를 통해 지하구조를 해석함으로써, 지표 지질에서 제천화강암이 광산에 훨씬 인접한 것과는 달리 지하에서는 남쪽의 백악기 무암사화강암이 광산 하부와 주변으로까지 뻗어있을 것으로 여겨지며, 결과적으로 광상 형성의 관계 화성암으로 작용하였을 것임을 제시한다.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.275-280
• /
• 2009

바나듐이 담지된 3차원 입방구조의 V-KIT-6를 Pluronic P123 공중합체를 구조형성제로 사용하고, 부탄올을 보조 계면활성제로 사용하여 TEOS와 $NH_4VO_3$로부터 수열합성법으로 제조하였다. 제조한 V-KIT-6는 좁은 기공분포(~6.0 nm)를 가지고 넓은 비표면적(${\sim}1,000m^2/g$)을 보여주었다. V-KIT-6에서 V의 배위 특성 등은 $^{51}V$ 스핀 공명 NMR과 ESR을 이용하여 분석하였다. 제조된 V-KIT-6는 테트라부틸 하이드로 퍼옥사이드(TBHP)를 산화제로 사용한 스티렌의 직접산화반응에서 우수한 촉매활성을 나타내었다.

• Fisheries and Aquatic Sciences
• /
• 제20권7호
• /
• pp.14.1-14.8
• /
• 2017

In this study, marine tunicate Styela clava hydrolysate was produced by an environment friendly and green technology, pressurized hot water hydrolysis (PHWH) at different temperatures ($125-275^{\circ}C$) and pressure 50 bar. A wide range of physico-chemical and bio-functional properties such as color, pH, protein content, total carbohydrate content, reducing sugar content, and radical scavenging activities of the produced hydrolysates were evaluated. The appearance (color) of hydrolysates varied depending on the temperature; hydrolysates obtained at $125-150^{\circ}C$ were lighter, whereas at $175^{\circ}C$ gave reddish-yellow, and $225^{\circ}C$ gave dark brown hydrolysates. The $L^*$ (lightness), $a^*$ (red-green), and $b^*$ (yellow-blue) values of the hydrolysates varied between 35.20 and 50.21, -0.28 and 9.59, and 6.45 and 28.82, respectively. The pH values of S. clava hydrolysates varied from 6.45 ($125^{\circ}C$) to 8.96 ($275^{\circ}C$) and the values were found to be increased as the temperature was increased. The hydrolysis efficiency of S. clava hydrolysate was ranged from 46.05 to 88.67% and the highest value was found at $250^{\circ}C$. The highest protein, total carbohydrate content, and reducing sugar content of the hydrolysates were found 4.52 mg/g bovine, 11.48 mg/g and 2.77 mg/g at 175, and 200 and $200^{\circ}C$, respectively. Hydrolysates obtained at lower temperature showed poor radical scavenging activity and the highest DPPH, ABTS, and FRAP activities were obtained 10.25, 14.06, and 10.91 mg trolox equivalent/g hydrolysate (dry matter basis), respectively. Therefore, S. clava hydrolysate obtained by PHWH at $225-250^{\circ}C$ and 50 bar is recommended for bio-functional food supplement preparation.

• 공업화학
• /
• 제28권5호
• /
• pp.593-596
• /
• 2017

본 연구에서는 염기조건에서 수열합성법으로 소듐 티타네이트 나노시트를 합성하였다. 합성한 소듐 티타네이트 나노시트를 $RuCl_3$ 수용액에서 자외선을 조사하여 루테늄을 소듐 티타네이트 나노시트의 표면에 도입하였다. X-선 회절분석과 투과전자현미경 및 에너지 분산형 분광기 실험을 통하여 샘플의 결정성과 형태를 분석하였고, 그 결과 루테늄원자가 소듐 티타네이트 표면에 균일하게 흡착되어 있는 것을 확인할 수 있었다. 또한 유도결합플라즈마 발광분광분석법을 통하여 소듐 티타네이트 나노시트에 도입된 루테늄을 정량하였다. 루테늄이 도입된 소듐 티타네이트 나노시트의 경우 산소를 산화제로 이용한 알코올 산화반응에 응용하였으며, 특히 루테늄이 7% 도입된 소듐 티타네이트 나노시트는 $105^{\circ}C$, 1기압 상에서 벤질 알코올을 다른 부산물 없이 벤즈알데하이드로 산화시키는 데 있어서 turnover frequency가 $2.1h^{-1}$인 촉매활성을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.224-232
• /
• 2002

CdS-$TiO_2$ nano-composite sol was prepared by the sol-gel method in organic solvents at room temperature and further hydrothermal treatment at various temperatures to control the physical properties of the primary particles. Again, CdS-$TiO_2$ composite particulate films were made by casting CdS-$TiO_2$ sols onto $F:SnO_2$ conducting glass and then heat-treatment at $400^{\circ}C$. Physical properties of these 61ms were further controlled by the surface treatment with $TiCl_4$, aqueous solution. The photo currents and hydrogen production rates measured under the experimental conditions varied according to the $CdS/[CdS+TiO_2]$ mole ratio and the mixed-sol preparation method. For $CdS-TiO_2$ composite sols prepared in IPA, CdS particles were homogeneously surrounded by $TiO_2$ particles. Also, the surface treatment with $TiCl_4$ aqueous solution caused a considerable improvement in the photocatalytic activity, probably as a result of close contacts between the primary particles by the etching effect of $TiCl_4$. It was found that the photoelectrochemical performance of these particulate films could be effectively enhanced by this approach.