• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1531_1532
• /
• 2009

This paper presents a method of self-arranging solderballs by using surface energy difference. After evaporating Au which has high surface energy on Si substrates, Teflon passivation layer which has low surface energy was patterned by lift-off process. Droplets formed only on the hydrophilic Au solderball lands by the surface energy difference, not the hydrophobic Teflon surface. Scattered solderballs sticked by themselves to the wetted solderball lands on the tilted substrate. After setting preheating of $200^{\circ}C$ and soldering of $245^{\circ}C$ hot plates, the solderballs were soldered on the solderball lands and two substrates were soldered together completely. After measuring the mechanical shear strength of the soldered substrates with solderballs of $3{\times}3$, $4{\times}4$ and $5{\times}5$ arrays. the calculated shear strength per one solderball was 1.1~2.4kgf as high as the previous report.

• Journal of Periodontal and Implant Science
• /
• v.47 no.2
• /
• pp.116-131
• /
• 2017

Purpose: The entry of bacteria or harmful substances through the epithelial seal of human gingival keratinocytes (HGKs) in the junctional epithelium (JE) is blocked by specialized intercellular junctions such as E-cadherin junctions (ECJs). However, the influence of roughened substrates, which may occur due to apical migration of the JE, root planing, or peri-implantitis, on the development of the ECJs of HGKs remains largely unknown. Methods: HGKs were cultured on substrates with varying levels of roughness, which were prepared by rubbing hydrophobic polystyrene dishes with silicon carbide papers. The activity of c-Jun N-terminal kinase (JNK) was inhibited with SP600125 or by transfection with JNK short hairpin RNA. The development of intercellular junctions was analyzed using scanning electron microscopy or confocal laser scanning microscopy after immunohistochemical staining of the cells for E-cadherin. The expression level of phospho-JNK was assessed by immunoblotting. Results: HGKs developed tight intercellular junctions devoid of wide intercellular gaps on smooth substrates and on rough substrates with low-nanometer dimensions (average roughness $[Ra]=121.3{\pm}13.4nm$), although the ECJs of HGKs on rough substrates with low-nanometer dimensions developed later than those of HGKs on smooth substrates. In contrast, HGKs developed short intercellular junctions with wide intercellular gaps on rough substrates with mid- or high-nanometer dimensions ($Ra=505.3{\pm}115.3nm$, $867.0{\pm}168.6nm$). Notably, the stability of the ECJs was low on the rough substrates, as demonstrated by the rapid destruction of the cell junction following calcium depletion. Inhibition of JNK activity promoted ECJ development in HGKs. JNK was closely associated with cortical actin in the regulation of ECJs in HGKs. Conclusions: These results indicate that on rough substrates with nanometer dimensions, the ECJs of HGKs develop slowly or defectively, and that this effect can be reversed by inhibiting JNK.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.886-890
• /
• 2010

The polytetrafluoroethylene (PTFE) films are deposited on glass using conventional rf-magnetron sputtering method. Their hydrophobic properties are investigated for application as an anti-fouling coating layer on the screen of displays. It is found that the hydrophobicity of PTFE films largely depends on the sputtering conditions, such as Ar gas flow and deposition time during sputtering process. These conditions are closely related to the deposition rate or thickness of PTFE film. Thus, it is also found that the deposition rate or the film thickness affects sensitively the geometrical morphology formed on surface of the rf-spluttered PTFE films. In particular, the PTFE film with 1950 nm thickness deposited for 30 minute at rf-power 50 W shows a very excellent optical transmittance of over 90% and a good anti-fouling property and a good durability.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.515.1-515
• /
• 1986

Thermostable tryptophanase was extracted from a thermophilie bacterium, strain T which was absolutely symbiotic with strain 5. The enzyme was purified 14.7 fold with 5.8% yield by chromatographies using ion exchange, gel filtration, and hydrophobic interaction columns, followed by high performance liquid chromatography on hydroxyapatite column. The purified enzyme has a molecular weight of approximately 210,000 estimated by gel filtration column chromatography, and the molecular weight of subunit was determined by SDS polyacrylamide gel electrophoresis to be 46,000, which indicates that the native enzyme is made of four homologous subunits. The tryptophanase was stable at 65o0 and the optimum temperature for the enzyme activity for 20 min reaction was 70$^{\circ}C$. The purified enzyme activity for 20 min ieaction was 70$^{\circ}C$. The purified enzyme catalyzed the degradation of L-tryptophan into indole, pyruvate and ammonia in the presence of pyridoxal phosphate. 5-Hydroxy-Ltryptophan, 5-methyl-DL-tryptophan, L-cysteine, S-methyl-L-cysteine, 5-methyl-DL-tryptophan, L-cysteine, S-methyl-Lcysteine, and L-serine were also used as substrates to form pyruvate. The amino acid composition of the tryptophanase was determined, and found to contain a high percentage of hydrophobic amino acids, especially in the proline content, which was much higher than that of Escherichia coli tryptophanase. In addition, the 35N-terminal amino acid sequence of the tryptophanase was completely different from that of E. coli tryptophanase.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.64-69
• /
• 2011

Super-hydrophobic properties have been achieved on the rf-sputtered polytetrafluoroethylene(PTFE) films deposited on etched aluminum surfaces. The microstructural evolution created after etching has been investigated by FESEM. The water contact angle over $160^{\circ}$ can be achieved on the rf-sputtered ultra-tihn PTFE film less than 10 nm coated on aluminum surface etched with 7 wt.%, 12.5 wt.%, and 15 wt.% HCl concentration for 12 min. XPS analysis have revealed the presence of a large quantity of $-CF_3$ and $-CF_2$ groups in the rf-sputtered PTFE films that effectively can reduce the surface energy of etched aluminum. The presence of patterned morphology along with the low surface energy at the rf-sputtered PTFE coating makes the aluminum surface with high super-hydrophobic property.

• Journal of Adhesion and Interface
• /
• v.5 no.2
• /
• pp.31-42
• /
• 2004

Many animals possess on their legs adhesive pads, which have undergone evolutionary optimization to be able to attach to variable substrates and to control adhesive forces during locomotion. Insect adhesive pads are either relatively smooth or densely covered with specialized adhesive hairs. Theoretical models predict that adhesion can be increased by splitting the contact zone into many microscopic, elastic subunits, which provides a functional explanation for the widespread 'hairy' design. In many hairy and all smooth attachment systems, the adhesive contact is mediated by a thin film of liquid secretion between the cuticle and the substrate. By using interference reflection microscopy (IRM), the thickness and viscosity of the secretion film was estimated in Weaver ants (Oecophylla smaragdina). 'Footprint' droplets deposited on glass are hydrophobic and form low contact angles. IRM of insect pads in contact showed that the adhesive liquid is an emulsion consisting of hydrophilic, volatile droplets dispersed in a persistent, hydrophobic phase. I tested predictions derived from film thickness and viscosity by measuring friction forces of Weaver ants on a smooth substrate. The measured friction forces were much greater than expected assuming a homogenous film between the pad and the surface. The findings indicate that the rubbery pad cuticle directly interacts with the substrate. To achieve intimate contact between the cuticle and the surface, secretion must drain away, which may be facilitated by microfolds on the surface of smooth insect pads. I propose a combined wet adhesion/rubber friction model of insect surface attachment that explains both the presence of a significant static friction component and the velocity-dependence of sliding friction.

• BMB Reports
• /
• v.41 no.12
• /
• pp.881-885
• /
• 2008

Protein phosphatase 1 consists of a secondary structure arrangement, conserved in the serine/threonine protein phosphatase gene family, flanked by nonconserved N-terminal and C-terminal domains. The deletion mutant of PP1 with the 8 nonconserved N-terminal residues removed was designated PP1-(9-330). PP1-(9-330) had a higher activity and affinity than PP1 when assayed against four different substrates, and it also demonstrated a 6-fold higher sensitivity to the inhibitor okadaic acid. This suggested that the N-terminal domain suppresed the activity of PP1 and interfered with its inhibition by okadaic acid. The ANS fluorescence intensity of PP1-(9-330) was greater than that of PP1, which implies that the hydrophobic groove running from active site in the truncated PP1 was more hydrophobic than in PP1. Our findings provide evidence that the nonconserved N-terminus of PP1 functions as an important regulatory domain that influences the active site and its pertinent properties.

• Journal of Environmental Science International
• /
• v.15 no.5
• /
• pp.485-491
• /
• 2006

In the aqueous solutions the dephosphorylations of isopropyl phenyl-4-nitrophenyl phosphinate(IPNPIN) mediated by hydroxide$(OH^{\theta})$ and o-iodosobenzoate$(IB^{\theta})$ ions ate relatively slow, because of hydrophobicity of the substrate, and however it appears that $OH^{\theta}$ is inherently better nucleophile than $IB^{\theta}$, which is more soft ion. On the other hand, in cetyltrimetyiammonium bromide(CTABr) solutions which contain cationic micelles, the dephosphorylations of IPNPIN mediated by $OH^{\theta}$ or $IB^{\theta}$ ate very accelerated to 120 or 100,000 times as compared with those in the aqueous solutions. The values of pseudo first order rate constants reach a maximum with increasing. Such rate maxima are typical of micellar catalysed bimolecular reactions and the rise in rate constant followed by a gradual decrese is characteristic of reactions of hydrophobic substrates. In the cationic micellar solutions of CTABr, $IB^{\theta}$ accelerates the reactions much more than that $OH^{\theta}$ does. The reason seems that $IB^{\theta}$ which is more hydrophobic and soft ion than $OH^{\theta}$ is more easily moved into the Stern layer of the CTABr micelles than $OH^{\theta}$. In the anionic micellar solutions of sodium dodecyl sulfate(SDS), the dephosrhorylations of IPNPIN ate slower than those in aqeous solutions. It means that $OH^{\theta}$ or $IB^{\theta}$ cannot easily move and approach to the Stern layer of the micelle in which almost all the hydrophobic substrate are located and which has a negative circumstance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.516-521
• /
• 2014

An excellent hydrophobic surface has a high contact angle over 147 degree and the contact angle hysteresis below $5^0$ was produced by using roughness combined with hydrophobic PTFE coatings, which were also confirmed to exhibit an extreme adhesion to glass substrate. To form the rough surface, the glass was etched by Ar-plasma. A very thin PTFE film was coated on the plasma etched glass surface. Roughness factors before or after PTFE coating on the plasma etched glass surface, based on Wensel's model were calculated, which agrees well with the dependence of the contact angle on the roughness factor is predicted by Wensel's model. The PTFE films deposited on glass by using a conventional rf-magnetron sputtering. The glass substrates were etched Ar-plasma prior to the deposition of PTFE. Their hydrophobicities are investigated for application as a anti-fouling coating layer on the screen of displays. It is found that the hydrophobicity of PTFE films mainly depends on the sputtering conditions, such as rf-power, Ar gas content introduced during deposition. These conditions are closely related to the deposition rate or thickness of PTFE film. Thus, it is also found that the deposition rate or the film thickness affects sensitively the geometrical morphology formed on surface of the rf-sputtered PTFE films. In particular, 1,950-nm-thick PTFE films deposited for 30 minute by rf-power 50 watt under Ar gas content of 20 sccm shows a very excellent optical transmittance and a good anti-fouling property and a good durability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.365-365
• /
• 2010

Similar to the superhydrophobic surfaces of lotus leaf, water strider leg is attributed to hierarchical structure of micro pillar and nano-hair coated with low surface energy materials, by which water strider can run and even jump on the water surface. In order to mimick its leg, many effort, especially, on the fabrication of nanohairs has been made using several methods such as a capillarity-driven molding and lithography using poly(urethane acrylate)(PUA). However most of those effort was not so effective to create the similar structure due to its difficulty in the fabrication of nanoscale hairy structures with hydrophobic surface. In this study, we have selected a low surface energy polymeric material of polytetrafluoroethylene (PTFE, or Teflon) assisted with surface modification of CF4 plasma treatment followed by hydrophobic surface coating with pre-cursor of hexamethyldisiloxane (HMDSO) using a plasma enhanced chemical vapor deposition (PE-CVD). It was found that the plasma energy and duration of CF4 treatment on PTFE polymer could control the aspect ratio of nano-hairy structure, which varying with high aspect ratio of more than 20 to 1, or height of over 1000nm but width of 50nm in average. The water contact angle on pristine PTFE surface was measured as approximately $115^{\circ}$. With nanostructures by CF4 plasma treatment and hydrophobic coating of HMDSO film, we made a superhydrophobic nano-hair structure with the wetting angle of over $160^{\circ}C$. This novel fabrication method of nanohairy structures has been applied not only on 2-D flat substrate but also on 3-D substrates like wire and cylinder, which is similarly mimicked the water strider's leg.