• 제목/요약/키워드: hydrogen yield

검색결과 476건 처리시간 0.048초

Purification and Characterization of Laccase from Wood-Degrading Fungus Trichophyton rubrum LKY-7

  • Hyunchae Jung;Park, Chongyawl;Feng Xu;Kaichang Li
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2001년도 춘계학술발표논문집
    • /
    • pp.18-25
    • /
    • 2001
  • A new wood-degrading fungus Trichophyton rubrum LKY-7 secretes a high level of laccase in a glucose-peptone liquid medium. The production of laccase by the fungus was barely induced by 2,5-xylidine. The laccase has been purified to homogeneity through three chromatography steps in an overall yield of 40%. The molecular mass of the purified laccase was about 65 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The purified laccase had the distinct blue color and had basic spectroscopic features of a typical blue laccase: two absorption maxima at 278 and 610 nm and a shoulder at 338 nm. The N-terminus of the laccase has been sequenced, revealing high homology to laccases from wood-degrading white-rot fungi such as Ceriporiopsis subvermispora. The enzyme had a "low" redox potential (0.5 V vs normal hydrogen electrode), yet it was one of the most active laccases in oxidizing a series of representative substrates/mediators. Compared with other fungal laccases, the laccase has a very low Km value with ABTS [2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid] as a substrate and a very high Km value with violuric acid as a substrate. The laccase has the isoelectric point of 4.0. The laccase had very acidic optimal pH values (pH 3-4) while it was more stable at neutral pH than at acidic pH. The laccase oxidized hydroquinone faster than catechol and pyrogallol. The oxidation of tyrosine by the laccase was not detectable under the reaction conditions. The laccase was strongly inhibited by sodium azide and sodium fluoride. fluoride.

  • PDF

해양방선균으로부터 Haloperoxidase의 검색과 특성 (Screening and Partial Purification of Haloperoxidase from Marine Actinomycetes)

  • 조기웅
    • 미생물학회지
    • /
    • 제44권2호
    • /
    • pp.116-121
    • /
    • 2008
  • Haloperoxidase를 생산하는 미생물을 분리하기 위하여 국내 연근해와 남북극 등의 해양시료에서 분리된 방선균 균주를 대상으로 탐색을 수행하여 남해 백도 해조류 추출물로부터 분리된 한 종류의 방선균(#1460)에서 높은 haloperoxidase 활성이 확인되었다. 본 균주의 생리.생화학적 특성은 Streptomyces 속과 유사하며 생산되는 haloperoxidase는 세포 조 추출물로부터 ammonium sulfate precipitation, High-Q column chromatography, gel permeation chromatography, Hydroxyapetite chromatography 그리고 hydrophobic interaction chromatography를 통하여 42%의 수율과 purification fold 70으로 정제하였다. 본 효소의 최적 반응 pH는 7이고 pH 8에서 더 높은 안정성을 보여 $60^{\circ}C$에서 1시간 반응에 효소활성의 50%가 생존한다. 또 cyanide와 azide 이온에 의해 강한 저해현상을 보인다.

Box-Wilson 실험계획에 의한 연마용 인산일수소칼슘의 최적 제조조건 추구 및 안정화 (A Study on the Optimum Conditions for Preparation of Calcium hydrogenphosphate Dihydrate by Box-Wilson Experimental Design)

  • 이계주;곽손혁;서성수
    • Journal of Pharmaceutical Investigation
    • /
    • 제26권3호
    • /
    • pp.221-232
    • /
    • 1996
  • An abrasive, calcium hydrogen phosphate dihydrate (DCPD), was synthesized in a Box-wilson experimental design by reactions between phosphoric acid and milk of lime, and calcium chloride and sodium phosphate solutions, and stabilized with TSPP and TMP. The optimum conditions for preparation of DCPD from phosphoric acid with milk of lime were such as; reaction temp.; $51.9^{\circ}C$, conc. of lime; 25.9%, conc. of phosphoric acd; 77.9%, drying temp.; $60.2^{\circ}C$ and final pH; 6.46. The physico-chemical and pharmaceutical properties of DCPD were showed as follows: glycerin absorption value(68 ml/100g), whiteness(99.5%), particle size(10.9 nm), pH(7.8), and set test(pass). XRD and SEM of DCPD indicated a monoclinic system crystallographically. $N_2$ adsorption isotherm curve by BET showed non porous type II form. The micromeritic parameters of DCPD showed that surface area was $3.27{\sim}4.6\;cm^{2}/g$ and pore volume, pore area and pore radius were negligible. The rheogram of the toothpaste containing DCPD showed pseudoplastic flow with yield value of 321, and thixotropic behavior forming hysteresis loop. These results meet the requirements as abrasive standard, and sythesized DCPD is expected as a good dental abrasive such as a high quality grade in practice.

  • PDF

Ripening Characteristics and Antioxidant Enzyme Activity of Ilmi under Heat Stress Condition

  • Hwang, Woon-Ha;Jeong, Jae-Hyeok;Lee, Hyeon-Seok;Choi, In-Bae;Ahn, Seung-Hyeon;Jeong, Han-Young;Yoon, Jong-Tak;Choi, Kyung-Jin
    • 한국작물학회지
    • /
    • 제63권2호
    • /
    • pp.112-119
    • /
    • 2018
  • Heat stress during the ripening stage reduces the yield and quality of rice. Considering the adverse effects of global warming, it is necessary to breed heat stress tolerant rice cultivars and analyze their stress tolerance characteristics. We investigated the ripening characteristics and antioxidant enzyme activity of Ilmi under heat stress condition during the ripening stage. Ripening rate, 1000 brown grain weight, and rice quality of Ilmi were not significantly changed by heat stress during the ripening stage. Leaf chlorophyll, chlorophyll a/b ratio, and malondialdehyde (MDA) contents of Ilmi leaves were also less changed than those of Ilpum. These results strongly suggested that Ilmi has heat tolerance characteristics during the ripening stage. Analysis of antioxidant enzyme activity of Ilmi revealed that peroxidase (POX) activity was significantly higher than that of Ilpum, and showed a significant correlation with the change in chlorophyll a/b ratio and hydrogen peroxide content of flag leaves of Ilmi. These data suggest that the high POX enzyme activity of Ilmi could be considered one of its major heat tolerance characteristics.

초고압 저온처리에 의한 매자나무의 면역 활성 (Effect of Immune Activity on Berberis koreana Palibin by Ultra High Pressure Low Temperature Process)

  • 김영;한재건;하지혜;정향숙;권민철;안주희;김진철;최근표;정을권;이현용
    • 한국약용작물학회지
    • /
    • 제16권6호
    • /
    • pp.439-445
    • /
    • 2008
  • This study was performed to investigate a methodology of improving immune activities of Berberis koreana Palibin by ultra high pressure on low temperature extraction process. Extraction yield was enhanced up to more than 35% by above process, compare to the control and extraction average. The cytotoxicity on human kidney cell (HEK293) was showed below 20.4%, 21.6% in adding 1.0 mg/ml of the highest concentration. Generally, the extracts by ultra high pressure extraction process showed less toxicity about 5% than the other processes. It could tell that toxic materials that existing in the plant could be reduced or broken by ultra high pressure process due to can be broken bond such the hydrogen bond, the electrostatic bond, the van der Waals bond, and the hydrophobic bond, can be broken by high pressure. The result could be employed to develop a new type of functional food from B. koreana Palibin by low temperature high pressure process.

연속식 가스화로를 이용한 목질계 바이오매스 이산화탄소 가스화 연구 (Study on a Carbon Dioxide Gasification for Wood Biomass using a Continuous Gasifier)

  • 박민성;장유운;장유경;전영남
    • 대한환경공학회지
    • /
    • 제36권10호
    • /
    • pp.704-710
    • /
    • 2014
  • 바이오매스는 지구온난화에 중요한 기여자인 이산화탄소와 같은 온실가스를 해결할 수 있는 대체에너지로 간주된다. 또한 바이오매스 에너지는 열화학적 전환 공정을 통해 다양한 형태로 전환된다. 본 연구에서는 목질계 바이오매스의 가스화를 위해 연속식 가스화기를 제작하였다. 목질계 바이오매스는 폐목재를 사용하였다. 이산화탄소 가스화 실험은 가스화 온도, 함수율 그리고 주입 이산화탄소 농도 변화에 따라 진행하였다. 실험결과는 가스화 온도가 증가함에 따라 생성가스 발생량이 증가함을 보였다. 경질타르는 중질타르의 열적 분해에 의해 증가되었고, 주사현미경 분석을 통해 촤 세공형성이 발달되는 것을 확인하였다. 일산화탄소 농도는 부다 반응에 의해 이산화탄소 주입농도 증가함에 따라 증가하였다. 변수별 실험에 의해, 최적 실험 조건에서 수소와 일산화탄소는 32.91%와 48.33%가 생성되었다.

Spectroscopic Properties of Quercetin-3-O-rhamnoside and Quercetin-3-O-rutinoside in Aerosol-OT Reverse Micelles

  • Park, Hyoung-Ryun;Liu, Hai-Bo;Shin, Sung-Chul;Park, Jong-Keun;Bark, Ki-Min
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권3호
    • /
    • pp.981-987
    • /
    • 2011
  • The anomalous spectroscopic properties of quercetin-3-O-rhamnoside (QCRM) and quercetin-3-O-rutinoside (QCRT) in AOT reverse micelle were studied. The excited state intramolecular proton transfer (ESIPT) occurs through the strong hydrogen bond between the -OH at position 5 and the carbonyl oxygen. Because the ESIPT can only happens in the $S_1$ state and the Franck-Condon factor involved in the $S_2\;{\rightarrow}\;S_1$ internal conversion is small, the $S_2\;{\rightarrow}\;S_o$ emission alone appears. Because the molecular planarity is improved at the interior of the micelle, the excited state intramolecular charge transfer in the $S_1$ state is extended, and the excited state is more tolerable for any quenching effects in the micelle. Therefore, an $S_1\;{\rightarrow}\;S_o$ emission was newly discovered under this micelle microenvironment. For the $S_2\;{\rightarrow}\;S_o$ emission, the quantum yields increase but the quantum yield of the $S_1\;{\rightarrow}\;S_o$ emission approximately decreases as the water concentration in the micelle increases.

Synthesis, Crystal structure, and Magnetic Properties of Dinuclear Iron(III) Complexes with Methoxo Bridges

  • Shin, Jong-Won;Han, Jeong-Hyeong;Rowthu, Sankara Rao;Kim, Bong-Gon;Min, Kil-Sik
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권12호
    • /
    • pp.3617-3622
    • /
    • 2010
  • The reaction of stoichiometric amount of $FeCl_2{\cdot}4H_2O$, (2-pyridylmethyl, 3-pyridylmethyl)amine (2,3-pyma) and sodium azide/sodium thiocyanate in methanol under aerobic conditions affords the dinuclear Fe(III) complexes, [(2,3-pyma) $(N_3)_2Fe({\mu}-OCH_3)_2Fe(N_3)_2$(2,3-pyma)]${\cdot}CH_3OH$ (1) and [(2,3-pyma)$(NCS)_2Fe({\mu}-OCH_3)_2Fe(NCS)_2$(2,3-pyma)] (2) in good yield. Two bis-methoxy-bridged diiron(III) complexes are isolated and characterized. The coordination geometries around iron(III) ions in 1 and 2 are the same tetragonally distorted octahedron. The iron(III) ions are coordinated by two nitrogens of a 2,3-pyma, two nitrogens of two azide/thiocyanate ions, and two oxygens of two methoxy groups. Both compounds are isomorphous. The structures of 1 and 2 display the C-$H{\cdots}\pi$ and/or $\pi-\pi$ stacking interactions as well as hydrogen bonding interactions, respectively. Compounds 1 and 2 show significant antiferromagnetic couplings through the bridged methoxy groups between the iron(III) ions in the temperature range from 5 to 300 K ($H=-2JS_1{\cdot}S_2$, J=-19.1 and $-13.9\;cm^{-1}$ for 1 and 2).

Synthesis and Characterization of Ir(H)(CO)(PEt3})22-C60)

  • Lee, Chang-Yeon;Lee, Gae-Hang;Kang, Hong-Kyu;Park, Bo-Keun;Park, Joon-T.
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권11호
    • /
    • pp.1958-1962
    • /
    • 2007
  • The title complex, Ir(H)(CO)(PEt3)2(η 2-C60) (2), has been prepared by the reaction of excess C60 (4 equiv) with a tetrairidium complex Ir4(CO)8(PEt3)4 (1) in refluxing chlorobenzene in 40% yield as green crystals. Compound 2 has been characterized by cyclic voltammetry (CV), spectroscopic methods (mass, IR, 1H and 31P NMR), and a single crystal X-ray diffraction study. The molecular structure reveals that the iridium atom of 2 is coordinated by two axial ligands of a hydrogen atom and a carbonyl group, and three equatorial ligands of two phosphorus atoms and an η 2-C60 moiety. The CV study exhibits three reversible one-electron redox waves for the successive reductions of 2, together with additional four redox waves due to free C60 reductions, which was formed by decomposition of 2 in the reduced states. The three reversible redox waves of 2 are shifted to more negative potentials by ca. 270 mV compared to free C60, reflecting both metal-to-C60 π-back-donation and the electron-donating nature of the two phosphorus ligands.

Materials Properties of Nickel Electrodeposits as a Function of the Current Density, Duty Cycle, Temperature and pH

  • Kim, Dong-Jin;Kim, Myung Jin;Kim, Joung Soo;Kim, Hong Pyo
    • Corrosion Science and Technology
    • /
    • 제5권5호
    • /
    • pp.168-172
    • /
    • 2006
  • Alloy 600 having a superior resistance to a corrosion is used as a steam generator tubing in nuclear power plants. In spite of its high corrosion resistance, there are many tubings which experience corrosion problems such as a SCC under the high temperature and high pressure environments of nuclear power plants. The Alloy 600 tubing can be repaired by using a Ni electroplating having an excellent SCC resistance. In order to carry out a successful Ni electrodeposition inside a steam generator tubing, the effects of various parameters on the material properties of the electrodeposit should be elucidated. Hence this work deals with the effects of an applied current density, duty cycle($T_{on}/(T_{on}+T_{off})$) of a pulse current, bath temperature and solution pH on the material properties of Ni electrodeposit obtained from a Ni sulphamate bath by analyzing the current efficiency, potentiodynamic curve, hardness and stress-strain curve. Hardness, YS(yield strength) and TS(tensile strength) decreased whereas the elongation increased as the applied current density increased. This was thought to be by a concentration depletion at the interface of the electrodeposit/solution, and a fractional decrease of the hydrogen reduction reaction. As the duty cycle increased, the hardness, YS and TS decreased while the elongation increased. During an off time at a high duty cycle, the concentration depletion could not be recovered sufficiently enough to induce a coarse grain sized electrodeposit. With an increase of the solution temperature and pH, the YS and TS increased while the elongation decreased. The experimental results of the hardness and the stress-strain curves can be supplemented by the results of the potentiodynamic curve.