• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1091-1097
• /
• 2014

Tageteserecta flower like zinc oxide nanostructures composed of hexagonal nanorods were synthesized via sonochemical method at room temperature. The synthesized nanomaterials exhibited wurtzite hexagonal phase structure with the single crystalline nature. The diameter of the individual nanorods that constitute the flower shaped zinc oxide structures is in the range of 120-160 nm. The sonication time effectively determined the morphological properties of the prepared materials. The catalytic activity of prepared zinc oxide nanostructures towards N-formylation reactions were evaluated without any surface modification and the nanostructures exhibited good reaction yield with the prompt recyclability behavior.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1044-1050
• /
• 2007

In this study, Bio-hydrogen is produced from organic waste mixtures containing food waste and waste activated sludge (WAS). The effects of different operational factor on hydrogen production, including various solubilization methods for pretreatments of WAS, pH and different ratios of food waste and WAS, were investigated. The highest hydrogen production values are obtained as 4.3 mL $H_2/g$ $VS_{consumed}$ in the case of applying the mixed pre-treatments of alkali and ultrasonic. The pH value in bio-reactor increased from 4 to 8 after the ultrasonic treatment with alkali and the hydrogen yield touched its highest value in the pH range of 5.0 to 5.5. Similarly, the hydrogen production reached the level of 13.8 mL $H_2/g$ $VS_{consumed}$ using the same pre-treatment method from the mixture of food waste and WAS. The ratio of 2 : 1 produced a maximum amount of hydrogen of 5.0 L $H_2/L/d$. The amount of volatile fatty acids(VFAs) including acetate, propionate and butyrate, were also varied considerably. Propionate decreased consistently with rising of hydrogen while butyrate comparing to acetate relatively increased in the effluent.

• Journal of Energy Engineering
• /
• v.15 no.1 s.45
• /
• pp.52-59
• /
• 2006

This paper examined the conversion of methane to hydrogen and other higher hydrocarbons using dielectric barrier discharge with AC pulse power. Two metal electrodes of a coaxial-type plasma reactor were separated by gas gap and an alumina tube. The inner electrode was located inside the alumina tube. The alumina tube was located inside the stainless steel tube, which was used as the outer electrode. Effect of feed gas composition (methane, oxygen, argon, water and helium), flow rate, applied frequency, input volt-age on methane conversion and product distribution were studied. The major products of plasma chemical reactions were ethylene, ethane, propane, buthane, hydrogen, carbon monoxide and carbon dioxide. The increment of applied voltage and the usage of inert gas as the background (helium and argon) enhanced the selectivity of hydrocarbons and methane conversion. The addition of water in the feed stream enhanced the conversion of methane and yield of hydrogen. Higher voltage leads to higher yield of $C_2H_6,\;C_3H_8,\;C_4H_{10}$ and yield or $C_2H_2\;and\;C_2H_4$ appeared highly in lower voltage.

• The Korea Journal of Herbology
• /
• v.29 no.6
• /
• pp.1-6
• /
• 2014

Objectives : This study was aimed to compare Gyejibokryeong-hwan (GBH) decoctions produced using different pressure levels for various extraction times to find the optimal extraction conditions through extraction yield, total soluble solids content (TSSC), hydrogen ion concentration (pH), and the contents of chemical compounds. Methods : Decoctions of GBH were prepared under the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min using water as extraction solvent. The extraction yield, TSSC, and pH were measured, and the amounts of the chemical compounds were determined using high performance liquid chromatography-photodiode array detector. Results : The higher pressure and longer extraction time increased the values of TSSC and extraction yield, while decreased the pH value. The decoctions produced in 180 min by pressurized method and produced in 150 min by non-pressurized method showed maximum values of extraction yield and TSSC with minimum value of pH. The amounts of chemical compounds showed variations in pressurized and non-pressurized decoction during overall extraction times. The influences of pressure and extraction time on extraction yield, TSSC, pH, and the contents of chemical compounds were confirmed by regression analysis, which showed that all extraction values were significantly affected by at least one of two extraction factors, pressure and extraction time. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GBH decoctions. However, optimal extraction conditions could not be chosen due to the variation of the amounts of chemical compounds.

• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.350-359
• /
• 1999

Conversion and oil-yield of a used automotive tire sample in supercritical decomposition and extraction for three solvents such as water, 28% ammoina solution and ammonia, were compared. Supercritical extraction with ammonia gave the highest conversion and oil-yield at the same temperature and pressure. In this paper, supercritical ammonia was used as major solvent and tetralin acting as hydrogen-donor, was used as cosolvent. As the amount of tetralin increased, oil-yield was Increased. When a tire sample was extracted by supercritical ammonia, oil-yield was 48.8% at $280^{\circ}C$, 22.3MPa. But when the weight ratio of tetralin to tire sample (weight of tetralin/weight of tire sample) was 5, oil-yield was 61.2% at $280^{\circ}C$ and 22.3 MPa. These phenomena indicate that as radicals produced in supercritical decomposition become stable, the polymerization and the second decomposition of products may be inhibited. Supercritical extraction of a tire sample swollen by tetralin gave high oil-yield although the amount of tetralin was a little.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.459-462
• /
• 2000

The pretreatment of used newspaper for the enzymatic digestion preprocess was performed on a percolation reactor and a batch reactor. The test condition of percolation process was $170^{circ}C$, 60min, 1 mL/min, and 400psi, that of batch was $40^{circ}C$, 3hr. and latm Reaction solutions used in pretreatment process were aqueous ammonia, sulfuric acid, water, and hydrogen-peroxide as an oxidizing agent. As a result, the effect of pretreatment was similar to batch and percolation process, but the yield of enzymatic hydrolysis was higher in batch than percolation. This batch pretreatment enhanced enzymatic hydrolysis rate and increased glucose yield from about 15 to 20%. The inhibition factors influenced the rate of enzymatic hydrolysis was investigated, and the ink contented newspaper was the major factor.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.121-125
• /
• 2003

Enzymatic polymerization of cardol derived from cashew nut shell liquid have been examined. t-Butyl alcohol aqueous systems showed high yield of polycardol when SBP was as biocatalyst. Compared other solvents, peroxidase actiyity was maintained stable, which was seemed major cause. Solvent aqueous system and concentration of hydrogen peroxide were found to have an influence on the yield and molecular weight distribution of polycardol under the reaction of enzymatic polymerization using peroxidase. The polymer was subjected to the hardening by methyl ethyl ketone peroxide and cobalt naphthenate catalyst, giving a crosslinked tough film. Polycardol was cured rapidly and the hardness increased with time. Finally, the pencil scratch hardness reached to 7H, which is enough hard for industrial uses.

• Structural Engineering and Mechanics
• /
• v.14 no.2
• /
• pp.209-221
• /
• 2002

In this paper a fracture criterion is proposed for cracked cylindrical samples of high-strength prestressing steels of different yield strength. The surface crack is assumed to be semi-elliptical, a geometry very adequate to model sharp defects produced by any subcritical mechanism of cracking: mechanical fatigue, stress-corrosion cracking, hydrogen embrittlement or corrosion fatigue. Two fracture criteria with different meanings are considered: a global (energetic) criterion based on the energy release rate G, and a local (stress) criterion based on the stress intensity factor $K_I$. The advantages and disadvantages of both criteria for engineering design are discussed in this paper on the basis of many experimental results of fracture tests on cracked wires of high-strength prestressing steels of different yield strength and with different degrees of strength anisotropy.

• Journal of the Korean Chemical Society
• /
• v.60 no.4
• /
• pp.251-256
• /
• 2016

This paper describes the synthesis of alkali metal salts of urea (ureates) and their application to the direct preparation of 4-nitrosoaniline from nitrobenzene via nucleophilic aromatic substitution of hydrogen. Sodium and potassium ureates were readily prepared from the reaction of urea with sodium hydride, metal methoxides, and metal hydroxides. The effect of ureates as nucleophiles on the conversion of nitrobenzene to 4-nitrosoaniline was investigated and compared with that of a urea-metal hydroxide mixture. It was found that the ureates were superior for producing 4-nitrosoaniline owing to their higher thermal stability of the ureate. The ureate obtained from the treatment of urea with sodium hydride gave the highest yield for the preparation of 4-nitrosoaniline. The ureates generated from the reaction of urea with metal hydroxide also gave high yields of 4-nitrosoaniline. Catalytic hydrogenation of 4-nitrosoaniline afforded polymer-grade 1,4-benzenediamine in quantitative yield.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.249-252
• /
• 2004

Cytochrome P450 (P450)/$O_2$/NADPH engender electron transfer reaction of N-benzyl-N-substituted benzylamines to yield corresponding radical cation 1 that is simultaneously converted into 2 and 3. Subsequently, expulsion of proton and hydroxylation yielding a-hydroxylamines are followed by formation of benzaldehydes and benzylamines.