• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.403-411
• /
• 1984

Amberlite XAD-7 and XAD-4 resins impregnated with DXHQ (5,7-dihalo-8-hydroxyquinoline) were prepared for the adsorption, separation and recovery of heavy metal ions from aqueous solutions. The characteristics of the impregnated resins, DXHQ (X : Cl, Br, I)-XAD were studied to find out the proper pairs of resin and DXHQ for the adsorption of metal ions. The increasing order of the impregnated amount of DXHQ onto XAD-7 resin was as follows: DCHQ < DBHQ < DIHQ. It was observed from the plot of log $K_d$ vs. pH that the optimum pH range for the adsorption of DIHQ onto XAD-4 resin was from 3.0 to 7.0. The stabilities of the DXHQ-XAD resins were investigated by measuring the amount of DXHQ remained on the XAD resin after shaking the DXHQ-XAD resins in various solutions of pH ranging from 2 to 12 and hydrochloric acid solutions. The impregnated resins were considerably stable in both acidic and neutral solutions. The amount of DIHQ leached from DIHQ-XAD-4 resin by eluting with various HCl solutions (1 ∼ 5M) was negligible, but in the case of XAD-7 resin it increases as the concentration of HCl solution increases. The optimum pH ranges, absorption mole ratio (M : DXHQ) and adsorption capacities (mmol metal per gram of resin) for the adsorption of metal ions onto the DXHQ-XAD resins were determined respectively. The stability of metal ion absorbed by the DXHQ-XAD resins was observed as the following order: M-DCHQ-XAD-7 < M-DBHQ-XAD-7 < M-DIHQ-XAD-7. The adsorbed metal ions were quantitatively recovered by eluting with HCl (0.5 ∼ 5M) and DXHQ-XAD resins could be reused over 5 times without re-impregnation of DXHQ.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.183-190
• /
• 1992

The influence of various levels of major medium components such as sucrose, nitrate, phosphate, plant growth regulators, and light intensity for cell growth and the production of anthocyanin content in cell cultures of Populus alba ${\times}$ P. glandulosa were investigated. Best results for anthocyanin yield were obtained using Murashige and Skoog(MS) medium containing 5% sucrose, 12.5% nitrate, 200% phosphate, 1.0mg/l indole-3-acetic acid(IAA), 1.0mg/l benaylaminopurine(BAP), and continuous illumination of 7,000 lux. On the other hand, maximum cell growth was achieved with 5% sucrose, 50% nitrate above 400% phosphate compare with that of MS basal mediumi, and 0.5mg/l 2, 4-dichlorophenoxyacetic acid(2, 4-D). Anthocyanin accumulation in a suspension cultured cells of given genotype was stimulated by subculturing onto the medium lacking 2, 4-D. Pigmented cell clusters were extracted with methanol containing 1% hydrochloric acid (HCl) and then anthocyanin was identified by thin layer chromatography (TLC) and U. V. spectrophotometer.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.46-52
• /
• 1992

$TiO_2/SO_4{^{2-}}$ was prepared by precipitation from the mixed solution of titanium chloride and hydrochloric acid followed by modification with sulfuric acid. The characterization of prepared catalyst was performed by using IR, XPS, XRD and DT-TGA. Infrared spectra of $TiO_2/SO_4{^{2-}}$ showed bidentate sulfate ion coordinated to the surface of $TiO_2$. The acid strength of modified catalyst was at least $H_0{\leq}-14.52$, showing the superacidic properties which are attributed to the double bond nature of S=O of the complex formed by the interaction of $TiO_2$ with sulfate ion. For $TiO_2/SO_4{^{2-}}$, the specific surface area increased and the transition from the amorphous to anatase phase occurred at a higher temperature, as compared with pure $TiO_2$.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.2
• /
• pp.235-242
• /
• 2008

In this study, the physicochemical and microbiological properties of market-available skate (Raja kenojei) kimchi were evaluated in comparison to long-term fermented Baechu kimchi. The comparative results for the skate (Raja kenojei) and Baechu kimchi products are as follows: salt concentrations = 3.40% and 3.95%, respectively; pH and acidity values = 4.01 and 3.90, and 0.65% and 0.82%, respectively; redox potential Eh values = 119.82 mV and 123.08 mV respectively; reducing sugars levels = 15.51 mg% and 13.23mg%, respectively; ascorbic acid levels = 24.21mg% and 22.18mg%, respectively; color L-values = 46.86 and 44.54, a-values = 15.46 and 12.28, and b-values = 29.94 and 28.36, respectively; hardness properties = 11.36 kgf and 10.23 kgf, respectively; hot water soluble pectin (HWSP) contents and sodium hexametaphosphate soluble pectin (NaSP) contents = 15.23% and 17.35%, and 32.51% and 29.64%, respectively; hydrochloric acid soluble pectin (HClSP) contents = 55.1% and 53.2%, respectively; total viable cell counts = $4.78{\times}10^8$ and $1.35{\times}10^8$, respectively; lactic acid bacteria counts = $5.18{\times}10^5$ and $1.32{\times}10^5$, respectively; and yeast levels = $8.52{\times}10^5$ and $5.23{\times}10^5$, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.4
• /
• pp.221-226
• /
• 1973

In order to investigate the silica effect of insufficient wollastonite to the official standard (above than 15% of suluble silica (N/2 HCl) on rice plant as silica fertilizer, 9 kinds of wollastonites and slag were adopted to examine the amount of silica absorbed by rice straw during growing period, and soluble silica of wollastonites extracted by 7 buffer solutions were compared with silica content in rice straw. Crystalls of ingredient in wollastonite ores were identified by X-ray diffractometer. The results were that silica content of rice plant at growing stages were increased as same ratio of soluble silica. content in wollastonite. Wollastonite containing more than 10% of souble silica (N/2 HCl) could be applied as fertilizer because absorbed amount of silica by rice plant from them are higher than from slag which contained 30% of soluble silica. Wollastonite powder mixed with impure ores in which soluble silica could not be extracted had the same effect on silica absorption of straw as wollastonite powder which contained conformable amount of soluble silica. The soluble silica of wollastonite extracted by buffer solutions (2% citric acid, N. NaOAc, N. $NH_4OAc$, Petermann solution, 0.1M. EDTA, and Hot water) had high significant relation to silica content in rice straw, but soluble silica extracted N/2 hydrochloric acid solutilon, also, had deep relation to them in rice straw. The adequate solution to extract silica from wollastonites is N/2 hydrochloric acid solution because its extracted silia amount is much higher than other solution (about one hundred times) and can be determined by gravimetric analysis. X-ray diffraction pattern would identify qualitatively purity of wollastonite, and large amount of soluble silica was extracted from wollastonite which was appeared to be weathered.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.541-550
• /
• 2010

A new $N_4O_3$ heptadentate ligand, N,N'-Bis(2-hydroxybenzyl)-1,3-bis[(2-aminoethyl)amino]-2-propanol(H-BAP 4HCl)was synthesized. The hydrochloric acid salts of Br-BAP 4HCl, Cl-BAP 4HCl, $CH_3O$-BAP 4HCl and $CH_3$-BAP 4HCl containing Br-, Cl-, H-, $CH_3O-$ and $CH_{3^-}$ groups at the para-site of the phenol group of the H-BAP were synthesized. The structures of the ligands were confirmed by C. H. N. atomic analysis and $^1H$ NMR, $^{13}C$ NMR, UV-visible and mass spectra. The elemental stepwise protonation constants(${logK_n}^H$) of the synthesized $N_4O_3$ ligands showed six steps of the proton dissociation. The orders of the overall dissociation constants($log{\beta}_p$) of the ligands were Br-BAP < Cl-BAP < H-BAP < $CH_3O$-BAP < $CH_3$-BAP. The orders agreed well with that of Hammett substituent constants($\sigma_p$). The calculated stability constants($logK_{ML}$) between the ligands and transition metal ions agreed well with the order of the overall proton dissociation constants of the ligands but they showed a reverse order in Hammestt substituent constants($\sigma_p$). The order of the stability constants between the transition metal ions with the ligands were Co(II) < Ni(II) < Cu(II) > Zn(II) > Cd(II) > Pb(II).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.674-680
• /
• 2012

As(III) and As(V) were analyzed in bamboo salts by hydride generation ICP-AES. In order to quantify the total amount of As in bamboo salts, $AsH_3$ was producted by reacting with 6 mol/L hydrochloric acid and $NaBH_4$, which was then analyzed by hydride generation ICP-AES. As(V) was quantified simultaneously after selectively quantifying As(III). As(III) was quantified by determining the total amount of As and then correcting for the amount of As(III). To improve the reliability of the analysis we repeated the experiment several times to check the detection limit, quantification limit, and measurements of our testing methods. According to the result of our quantification analysis of As existing in bamboo salt, the range of total As content was 0.05 mg/kg~0.2 mg/kg and As(V) was over 90% of the total As.

• The korean journal of orthodontics
• /
• v.44 no.4
• /
• pp.195-202
• /
• 2014

Objective: A low-viscosity resin (infiltrant) was used to inhibit the progression of white spot lesions (WSLs) and resolve associated esthetic issues. An alternative pretreatment was explored to increase the pore volume of the surface layer of the WSLs. Also, the penetration effects of the infiltrant were evaluated for various pretreatments. Methods: Sixty two artificial lesions were fabricated on bovine teeth. As a positive control, 15% HCl gel was applied for 120 seconds. Further, 37% $H_3PO_4$ gel was applied for 30 seconds using three methods. The samples were divided as follows: $H_3PO_4$ only group, $H_3PO_4$ sponge group, and $H_3PO_4$ brush group. The acid was gently rubbed with the applicators (i.e., a sponge or brush) throughout the application time. To compare the effects of resin infiltration, twenty paired halves of specimens were treated with an infiltrant (ICON$^{(R)}$). Results: Thicknesses of the removed surface layers and infiltrated areas were evaluated by confocal laser scanning microscope. The positive control and the 37% $H_3PO_4$ brush group failed to show significant differences in the removed thickness (p > 0.05); however, the mean percentage of the infiltrated area was higher in the 37% $H_3PO_4$ brush group ($84.13{\pm}7.58%$%) than the positive control ($63.51{\pm}7.62%$, p < 0.001). Scanning electron microscope observations indicate higher pore volumes for the 37% $H_3PO_4$ brush group than for the positive control. Conclusions: Application of 37% $H_3PO_4$ with a brush for 30 seconds increased the pore volume of WSL surface layers and the percentage of infiltrated areas in comparison to the use of 15% HCl for 120 seconds.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.45-53
• /
• 2005

Electro-generated chlorine leaching of waste printed circuit boards was investigated in hydrochloric acid solutions. Non-magnetic component of $0.6{\sim}1.2mm$ was prepared by grinding, magnetic separation, and sieving. The non-magnetic component of pulverized printed circuit board contained about 45% of metal component, in which copper was about 83.6%. The leaching rate of copper was greatly affected by current density and agitation speed. The leaching of copper up to 98% was achieved at $20mA/cm^2$, $50^{\circ}C$, 180 minutes, and 600 rpm in 1M HCl solutions. Increasing agitation and lowering current density enhanced utilization efficiency of electro-generated chlorine. Leaching of copper was suppressed at the initial stage, while the minor metal elements, such as aluminum, lead, and tin, were dominantly leached out.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.306-313
• /
• 2022

Purpose: The purpose of this study is suggested to improve upon current existing methods of ammonia chemical accident prevention and damage reduction. Method: Ammonia is one of the most common toxic substances that causes frequent chemical accidents. And it was selected as leakage materials according to statistics on chemical accident. Based on actual cases of chemical accidents, CARIS modeling was used to compare the damage impact range of Ammonia and HCl and Cl. Also, find out problems with the current systems. Result: As a result of find out the range of accident influence that spreads to the surroundings when an ammonia chemical accident, it was longer than the range of influence of hydrochloric acid and shorter than that of chlorine. In addition, it was found that when chemical accident by ammonia, hydrochloric acid, or chlorine, there are apartments and schools, which can have an effect. Conclusion: It is decided that it is necessary to determine whether or not chemical accident prevention management plans and statistical investigations are submitted for workplaces dealing with ammonia, and detailed guidelines and reviews are necessary. In addition, it is judged that it is necessary to establish a DB for ammonia handling plants, and it is considered that information sharing and joint inspection among related organizations should be pursued.