• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1947-1950
• /
• 1998

GTO inverter used for traction motor drives includes harmonics in the output current and torque by the limitation of switching frequency. However, the hybrid PWM method, using SPWM in low frequency range and SHE PWM in upper frequency range, can be obtained the relative less harmonic characteristic. The transient reaction, which the magnetic flux and the torque is altered and instantly the large current is flowed, may be produced at the mode change. This paper presents the techniques which can reduce the transient reactions produced in the gear changing of inverter fed traction motor drives operating in the hybrid PWM. The results are verified by the simulations.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.992-994
• /
• 1995

FLC has a good performance for complication system or unknown model by using human linguistic method but many part control design are based on expert knowledge or trial-error method and it is difficult to prove stability and robustness of controller. In this paper we improve this problem by setting fuzzy rules by dividing phase plane of error and rate of error change by switching surface. We can guarantee the stability in nonlinear system, and also in fuzzy PID type controller the complexity of controller design is increased by increasing the number of input variables and defining more range of operation if we want performance of more specific rules, thus we need to fine the method to decrease the number of control rules used in FLC design. In this paper the algorithm is validated by simulation using conventional FLC and proposed method.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.374-375
• /
• 2018

신재생에너지의 보급 확산과 전력수요의 증가에 따라 전력계통이 분산화되는 추세이며 이에 따라 배전계통의 안정화를 위한 전력계통 안정화 장치(Power System Stabilizer)로 그 사용이 확대되고 있는 추세이다. 따라서 대표적인 전력계통 안정화 장치인 정지형 무효전력보상장치(SVC: Staic Var Compensator)에 대한 다양한 토폴로지로 개발되고 있다. 또한 기술의 트랜드는 SVC에서 Statcom 기술 개발로 이어지고 있다. 최근 Statcom의 변환손실 및 경제적 단점을 극복하기 위해 Statcom과 SVC를 병렬로 사용하는 Hybrid 방식에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 SVC 기능에서 TCC(Thyristor Controlled Capacitor)방식에서 문제가 되는 돌입전류 제한을 위한 새로운 Soft-Step Switching 방식을 제안한다. 또한 Statcom의 용량을 줄이기 위해 SVC용 무효전력 보상 리액터 및 콘덴서 군을 설계하였다.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.91-99
• /
• 2006

The diesel Auxiliary Power Unit (APU) for vehicle applications is a complex nonlinear system. For the purpose of this paper presents a dynamic average model of the whole system in an entirely physical way, which accounts for the non-ideal behavior of the diode rectifier, the nonlinear phenomena of generator-rectifier set in an elegant way, and also the dynamics of the dc load and diesel engine. Simulation results show the accuracy of the model. Based on the average model, a simple PI control scheme is proposed for the multivariable system, which includes the steps of model linearization, separate PI controller design with robust tuning rules, stability verification of the overall system by considering it as an uncertain one. Finally it is tested on a detailed switching model and good performances are shown for both set-point following and disturbance rejection.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.27-30
• /
• 2003

본 논문에서는 하이브리드 다중 표현(hybrid multiple description) 개념을 이용하여 에러가 발생하기 쉬운 환경에서 사용될 수 있는 강인한 동영상 압축 알고리듬을 제안한다. 다중 표현 압축은 단일 표현 압축(single description coding. SDC) 보다 패킷 손실 율(packet loss rate, PLR)이 높은 환경에서 에러에 더 강인성을 갖는다. 그러나 PLR 이 낮은 환경에서는 과도한 중복량(redundancy) 때문에 성능이 저하되는 문제가 발생한다 이러한 MDC 의 문제를 해결하기 위해서 채널 환경에 따라 SD/MID 를 전환할 수 있는 방법을 제안한다. 좀더 자세히 설명하면, 낮은 PLR 에서는 압축 효율을 위하여 SDC 를 사용하고 높은 PLR 환경에서는 에러에 대한 강인성을 위해 MDC 를 사용한다. SD/MD 전환을 최적화시키기 위해 비트율-왜곡 최적화 프레임웍(rate-distortion optimization framework)을 사용한다. 부호화시에 복호기에서의 왜곡(distortion)을 정확히 예측하기 위해서 ROPE(recursive optimal per-pixel estimate) 방법을 사용한다. 모의 실험 견과 제안된 SD/MD 전환 방법이 기존의 SDC-ROPE 와 MDC-ROPE 보다 모든 에러 환경에서 더 효과적임을 알 수 있다.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.48-50
• /
• 2001

This paper presents the switching angle and the 1/2-phase hybrid exciting method to minimize torque ripple in the 6/4 Switched Reluctance Motor (SRM). The inductance in SRM is dependent on rotor position and current. Therefore, the inductance profile is expressed as an approximate function based on FEM data. And then, the dynamic characteristics are simulated by Matlab simulink using the derived inductance function. The torque ripple resulting from single phase exciting and 1/2-phase hybrid exciting is compared.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.333-334
• /
• 2016

This paper proposes a new cascoded configuration for hybrid energy storage system (HESS) which consists of batteries and supercapacitor (SC) for Electric Vehicle applications. In this configuration,a resonant LLC converter is interfacedin series with a battery module and it converts a part of the energy from the batteries and transfer it to the dc-link bus. The LLC converter is controlled by a phase-shift angle between the primary and secondary switches to maintain a constant dc-link voltage and obtain soft-switching conditions for all the primary switches. By placing the SC moduleina cascoded concept, the rated voltage of SC can be reduced significantly compared with the conventional topologies. It helps save the cost and reduce the number of SC cells. The proposed configuration can operate with four different modes: feeding load, acceleration, regenerative braking andSC charging. A scaled-down prototype converter (2 kW, 600V output) is designed and tested to verify the advantages of the proposed topology. The maximum efficiency obtained with the proposed topology is 99%.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.574-585
• /
• 2015

This paper aims to improve the performance of conventional direct torque control (DTC) drives proposed by Takahashi by extending the idea for 5-level inverter. Hybrid cascaded H-bridge topology is used to achieve inverter voltage vector composed of 5-level of voltage. Although DTC is very popular for its simplicity but it suffers from some disadvantages like- high torque ripple and uncontrollable switching frequency. To compensate these shortcomings conventional DTC strategy is modified for five levels voltage source inverter (VSI). Multilevel hysteresis controller for both flux and torque is used. Optimal voltage vector selection from precise lookup table utilizing 12 sector, 9 torque level and 4 flux level is proposed to improve DTC performance. These voltage references are produced utilizing a hybrid cascaded H-bridge multilevel inverter, where inverter each phase can be realized using multiple dc source. Fuel cells, car batteries or ultra-capacitor are normally the choice of required dc source. Simulation results shows that the DTC drive performance is considerably improved in terms of lower torque and flux ripple and less THD. These have been experimentally evaluated and compared with the basic DTC developed by Takahashi.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1119-1129
• /
• 2014

This study proposes a novel five-level three-phase hybrid-clamped converter composed of only six switches and one flying capacitor (FC) per phase. The capacitor-voltage-drift phenomenon of the converter under the classical sinusoidal pulse width modulation (SPWM) strategy is comprehensively analyzed. The average current, which flows into the FC, is a function of power factor and modulation index and does not remain at zero. Thus, a specific modulation strategy based on space vector modulation (SVM) is developed to balance the voltage of DC-link and FCs by injecting a common-mode voltage. This strategy applies the five-segment method to synthesize the voltage vector, such that switching losses are reduced while optional vector sequences are increased. The best vector sequence is then selected on the basis of the minimized cost function to suppress the divergence of the capacitor voltage. This study further proposes a startup method that charges the DC-link and FCs without any additional circuits. Simulation and experimental results verify the validity of the proposed converter, modulation strategy, and precharge method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.63-68
• /
• 2016

Audio mixer is an electronic device which performs a mixing of multiple audio signals. Digital mixer having various functions and scalability is spreaded thanks to advanced DSP and IT technology. However, digital mixer is more vulnerable to stability comparing to conventional analog mixer in the digital error or software error sense because its control is executed by SW. To solve this problem, in this paper, we propose a multi-channel digital analog hybrid mixer scheme, digital mixer error detection mechanism and malfunctioning switching technique. Also we develop the audio mixer having digital-analog hybrid structure. By simulation, we can sense the error of digital mixer except power loss in a 120ms, change into analog mixer mode automatically and provide continuous broadcasting function without mixer function loss.