• Korean Journal of Microbiology
• /
• 제27권2호
• /
• pp.98-107
• /
• 1989

Intraspecific fusants, produced by protoplast fusion of auxotrophic mutants from Trichoderma koningii ATCC 26113, were segregated into various strains including parental types, non-parental auxotrophic hybrids, and prototrophic hybrids on complete plate. Interestingly, some of non-parental prototrophic hybrids revealed to have enhanced cellulolytic activity incomparison with other strains of parents or hybrids derived thereafter. It was also evident that prototrophic hybrids of aneuploid could be constructed after the spontaneous segregation of complementing fusants produced through the protoplast fusion.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.153-156
• /
• 2001

본 논문에서는 하이브리드 패턴 벡터를 이용하여 차량 번호를 실시간으로 인식하는 알고리즘을 제안하였다. 차량 입력 영상에서 전처리 과정을 거쳐 번호판의 수평 및 수직 명암값 빈도수 변화를 이용해 번호판 영역을 추출하고 하이브리드 패턴을 적용해 더 정확한 번호판 문자 및 숫자를 인식하는 알고리즘을 제안하였다. 제안한 알고리즘의 번호판 추출 과정에서는 번호판 영역의 문자와 배경이 뚜렷하게 구별되는 특성 및 번호 판 영역의 상대적인 크기의 특성과 수평 및 수직 빈도 수를 추하여 입력된 차량영상에서 번호판 영역을 추출한다. 또한 번호판 영역에서 잡음 제거와 세선화(Thinning)를 적용해 문자 및 숫자를 하이브리드 패턴 벡터를 적용하여 문자의 크기, 문자와 문자 사이의 밀집도의 특성, 이동에 무관한 특성을 이용해 차량 번호를 인식하는 알고리즘을 제안하였다. 제안한 방법들을 적용한 결과 기존의 원형 패턴 벡터 보다 훨씬 계산 속도가 빠르며, 차량 번호판의 크기에 관계없이 잡음에 영향을 받지 않고 차량 번호를 실시간으로 처리할 수 있는 가능성을 제시하였고, 번호판 영역이 불규칙한 조명 상태에서도 더 정확한 차량 번호를 인식 할 수 있는 알고리즘을 본 논문에서 제안하였다.

• Korean Journal of Microbiology
• /
• 제24권2호
• /
• pp.91-97
• /
• 1986

Intra and interspecfic fusants were produced by the protoplast fusion of auxotrophic mutants from Trichoderma koningii ATCC 26113 and Trichoderma reesei QM 9414. It was found that 0.6M $MgSO_4\;and\;0.6M\;NH_4Cl$ was the best osmotic stabilizer for the preparation of protoplasts from the mycelium of T. koningii and T. reesei respectively. However, $MgSO_4$ was the most suitable one for the regeneration of the protoplasts from both species. The intraspecific protoplast fusion frequencies between the auxotrophic mutants from T. reesei were $1.8{\times}10^{-2}\;to\;5.1{\times}10^{-1}$. Interspecific protoplast fusion frequencies between the auxotrophic mutants from T. koningii and T. reesei were $3.6{\times}10^{-3}$\;to\;8.4{\times}10^{-2}. Interspecific complementing fusants, however, were not alwats produced. Fusants obtained from interspecific potoplast fusion were spontaneously segregated into various strains including parental types, non-parental auxotrophic hybrids, and prototrophic hybrids on complete plate. Interspecific hybrids revealed to have partially enhanced celluloytic activities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제21권7호
• /
• pp.1633-1641
• /
• 1996

In this paper we propose a new method for anlayzing the properties of surface reflectance and reconstructing the shape of object using estimated reflectance parameters. We have investigated the hybrid reflectance surface which has specularreflection and diffuse reflection, which can be explained by Torrance-Sparrow model. Sample sphere made on one maerial is used to estimate the reflectance properties by using LMS algorithm. We can make the reference image which consists of surface normal and brightness value using estimated reflectance parameters, and thenarbitrary shape object made of the same material as sample can be reconstructed by matching with reference image. Photometric matching method proposed in this paper is robust because it mateches object image with the reference imageconsidering its neighbor brightness distribution. Also, in this paper plate diffuse illumination is used to remove intensity disparity with simple scheme. It is expected that the proposed algorithm can be applied to 3D recognition, vision inspection system and other fields.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.415-429
• /
• 2002

Various modeling techniques for ultrasonic wave propagation and scattering problems in finite solid media are presented. Elastodynamic boundary value problems in inhomogeneous multi-layered plate-like structures are set up for modal analysis of guided wave propagation and numerically solved to obtain dispersion curves which show propagation characteristics of guided waves. As a powerful modeling tool to overcome such numerical difficulties in wave scattering problems as the geometrical complexity and mode conversion, the Boundary Element Method(BEM) is introduced and is combined with the normal mode expansion technique to develop the hybrid BEM, an efficient technique for modeling multi-mode conversion of guided wave scattering problems.

• Journal of the Korean Society of Safety
• /
• 제12권2호
• /
• pp.37-44
• /
• 1997

Composite materials have various complicated characteristics depending on the ply materials, ply orientations, ply stacking sequences and boundary conditions. Therefore, it is difficult to analyze composite materials. For efficient use of composite materials in engineering applications, the dynamic behavior such as natural frequencies and nodal patterns should be identified. This study presents FEM results for the free vibration of symmetrically and antisymmetrically laminated composite and hybrid composite rectangular plates. The natural frequencies of laminated composite rectangular plates having the various boundary conditions (completely clamped, 2-edge clamped, cantilevered) are experimentally obtained. In order to demonstrate the validity of the experiment, FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with that calculated by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.

• Structural Engineering and Mechanics
• /
• 제78권5호
• /
• pp.573-583
• /
• 2021

This paper presents a theoretical approach of the structures reinforced with bonded FRP composites, taking into account loading model, shear lag effect and the thermal effect. These composites are used, in particular, for rehabilitation of structures by stopping the propagation of the cracks. They improve rigidity and resistance, and prolong their lifespan. In this paper, an original model is presented to predict and to determine the stresses concentration at the FRP end, with the new theory analysis approach. The model is based on equilibrium and deformations compatibility requirements in and all parts of the strengthened beam, i.e., the concrete beam, the FRP plate and the adhesive layer. The theoretical predictions are compared with other existing solutions. The numerical resolution was finalized by taking into account the physical and geometric properties of materials that may play an important role in reducing the stress values. This solution is general in nature and may be applicable to all kinds of materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.79-80
• /
• 2022

A method for repairing cracks using low-viscosity resins has been proposed as a construction method that can quickly repair roads from deterioration. However, when the viscosity of the epoxy resin is high, there is a limit in that it is difficult for the material to penetrate into microcracks and cracks in the concrete top plate. In this study, an epoxy thin-layer pavement repair method was developed using low-viscosity PMMA (Poly methyl methacrylate) to repair microcracks on the pavement surface and pavement layer and reinforce the pavement surface. Materials necessary for the thin-layer packaging method were developed, and performance was evaluated to meet the epoxy binder quality standards. As a result, all materials met the required performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권6호
• /
• pp.453-457
• /
• 2016

In various industrial plants such as power generation plants, petrochemical plants, and unit factories, there is an increasing demand for a system that generates hot water using waste or surplus steam. Compact steam unit (CSU), which produces hot water by using steam, is a good solution considering energy reuse. In this study, as a basic study to develop a high-pressure CSU, heat transfer characteristics of a hybrid heat exchanger were investigated through experiments, in order to use the hybrid heat exchanger instead of a conventional plate heat exchanger as the core component of CSU. The experimental results are the followings. Heat balance between the hot side and cold side was satisfied within ${\pm}5%$. Overall heat transfer coefficient increased linearly as the Reynolds number increased and exceeded $5,524W/m^2K$ when the flow velocity was above 0.5 m/s. In addition, pressure drop also increased as the Reynolds number increased, and pressure drop per unit length was below 50 kPa/m.

• Journal of the Korean Ceramic Society
• /
• 제50권2호
• /
• pp.142-148
• /
• 2013

Conventional cold isostatic pressing, slip casting, and filter pressing are not completely suitable for fabricating large plates because of disadvantages such as the high cost of equipment and formation of density gradient. These problems could be avoided by employing pressure-vacuum hybrid slip casting (PVHSC). In the PVHSC, the consolidation occurs not only by the compression of the slip in casting room, but also by vacuum sucking of the dispersion medium around the mold. We prepared the alumina bodies by the PVHSC in a static- or stepwise-pressure manner for loading up to 0.5 MPa using an aqueous slip. The green bodies were dried at $30^{\circ}C$ with 40 ~ 80% relative humidity. Under static pressure, casting induced a density gradient in the formed body, resulting in cracking and distortion after the firing. However, the stepwise pressure loading resulted in green bodies with homogeneous density, and the minimization of the appearance of those defects in final products. Desirable drying results were obtained from the cast bodies dried with 80% RH environment humidity. When sintered at $1650^{\circ}C$ for 4 h, the alumina plate made by stepwise-pressure casting reached full density (> 99.7% relative density).