• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.705-712
• /
• 2004

An inverse boundary analysis of surface radiation in an axisymmetric cylindrical enclosure has been conducted in this study. Net energy exchange method was used to calculate the radiative heat flux on each surface, and a hybrid genetic algorithm was adopted to minimize an objective function, which is expressed by sum of square errors between estimated and measured or desired heat fluxes on the design surface. We have examined the effects of the measurement error as well as the number of measurement points on the estimation accuracy. Furthermore, the effect of a variation in one boundary condition on the other boundary conditions was also investigated to get the same desired heat flux and temperature distribution on the design surface.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.343-350
• /
• 2001

To investigate air quality away from the coastal urban source region, we used a hybrid Eulerian - Lagrangian method which can describe the formation, transport, transform and deposition processes in complex terrain, with inclusion of shipping sources that were considered to be important emission in the coastal urban region. The result of the Eulerian advection - diffusion prediction was quite similar to that of the Lagrangian particle diffusion prediction. It showed that pollutants emitted from Sasang and Janglim industrial complexes can affect Hwamyeong and the coastal, respectively. During the daytime the concentration was low due to large deposition flux and terrain effect.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.752_753
• /
• 2009

This paper deals with controller design and dynamic simulation of hybrid magnetic bearing. The flux density at air-gap is obtained from system modeling which considers permanent magnet and electro magnet. The vertical force is derived yb that flux density using maxwell's stress tensor.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.724_725
• /
• 2009

This paper deals with control parameters deduction and dynamic analysis of hybrid thrust magnetic bearing(HTMB). The flux density at air-gap is obtained from system modeling which considers permanent magnet and electro magnet. The vertical force is derived from flux density using maxwell's stress tensor. An accurate linear model is obtained by using linear approximations of the attraction force around the nominal equilibrium point. The dynamic simulation of the HTMB using the PD controller is conducted and control parameters are deducted.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.262-265
• /
• 2003

This Study is focused on the instrumenting Hybrid Rocket Motor of ACPL at Konkuk University and researching combustion instability by measuring regression rate versus oxidizer mass flux. In the result of experiment, test fire was moderate and we could acquire data of pressure, thrust, and temperature of combustion chamber. In the future, studying unsteady change of regression rate and pressure characteristic analysis of combustion chamber through hundreds of experiments should be performed. furthermore, researching characteristic velocity by taking a measurement of combustion temperature will be inevitable.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.2
• /
• pp.73-79
• /
• 2005

This paper is proposed hybrid artificial intelligent (HAI) controller based on the vector controlled induction motor drive system. The hybrid combination of fuzzy control and neural network will produce a powerful representation flexibility and numerical processing capability. Also, this paper is proposed speed estimation of induction motor using a closed-loop state observer. The rotor position is calculated through the stator flux position and an estimated flux value of rotation reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The results of analysis prove that the proposed control system has strong robustness to rotor parameter variation, and has good steady-state accuracy and transitory response.

• Journal of Aerospace System Engineering
• /
• v.2 no.4
• /
• pp.1-6
• /
• 2008

In generally, the regression rate was expressed with average value and oxidizer mass flux in hybrid propulsion system. This can not represent the local value of regression rate along with oxidizer flow direction. In this study, experimental studies were performed with Separation method and Cutting method for measure local regression rate. In axial injection, the local regression rate decreases rapidly with axial location near entrance and increases with axial direction from the leading edge and the empirical formula for local regression rate with function of oxidizer mass flux and location was derived. Swirl injection regression rate has higher value at the leading edge of the fuel and comparatively uniform regression rate at the downstream. Overall regression rate of swirl injection is higher increased about 54 % than regression rate of axial injection.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1582-1591
• /
• 2014

This paper presents a hybrid sensorless control for an interior permanent magnet synchronous motor (IPMSM) for zero-, low-, and high-speed regions. Many sensorless control methods such as an observer-based estimator have been introduced. However, most of the observer-based estimators have a disadvantage at start-up and in the low-speed region. To solve this problem, a simple strategy of using a hybrid system is proposed by integrating a high-frequency (HF) signal injection method and a full-order flux observer. In addition, an HF signal injection method with only a low pass filter (LPF) is proposed to simplify the hybrid system. The hybrid system achieves high-performance drive throughout the entire speed range. The effectiveness of the proposed hybrid technique is verified by experiments using an 11-kW IPMSM drive system.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.413-430
• /
• 2019

This paper presents an optimum hybrid SVPWM technique for three-level voltage source inverters (VSIs). The proposed hybrid SVPWM technique aims to minimize total harmonic distortion (THD). A new parameter is introduced to incorporate the heterogeneous nature of switching sequences of SVPWM technique. The proposed hybrid SVPWM technique is implemented on a low-cost PIC microcontroller (PIC18F452) and verified experimentally with a 2 KVA three-phase three-level insulated gate bipolar transistor-based VSI. Optimum switching sequence results in the three-level inverter configuration are demonstrated. The proposed hybrid SVPWM technique improves the THD performance by 17.3% compared with the best available three-level SVPWM technique.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.319-324
• /
• 2013

In this study, an EP (electro-polishing)-MAP (magnetic abrasive polishing) hybrid process was developed as a precision finishing process. To evaluate the characteristics of this EP-MAP hybrid process, a series of experiments were carried out using various working gaps, current densities, and electrolyte concentrations. As a result, $NaNO_3$ was found to be very suitable as the electrolyte of the hybrid process because there was no electrochemical reaction with the CNT-Co composite. Moreover, an increase in the magnetic flux density affected the liquidity of the electrolyte and prevented it from flowing into the CNT-Co composite powder. For that reason, the lower liquidity of the electrolyte increased the thermal energy on the surface of the workpiece.