• Economic and Environmental Geology
• /
• v.32 no.4
• /
• pp.365-371
• /
• 1999

Ture diplacement of a fault monement is calculated from the displacement of the index plane such as bedding on an outcrop surface. The input parameters are the orientations of the index, fault, and outcrop planes. It is also necessary to input the orientation of fault striation and the offset distance of the index plane on the outcrop surface. The distances of the total, strike, horizontal and dip slip components of the fault movement are calculated from the input parameters. Hwang(1998) conducted a simlar calculation using trigonoment method. To apply the previous method, the offset distance of the index plane must be measured on a vertical outcrop surface. The calculation method of this study accepts the offset distence of index plane on an outcrop plane of any orientation. Calculation results from both method are indentical, regardless of the simplicity of the new method.

• The korean journal of orthodontics
• /
• v.22 no.3 s.38
• /
• pp.675-690
• /
• 1992

The purpose of this study was to obtain the lingual morphology (size, angulation, contour, eminence) of adults with normal occlusion in order to provide the basic data for lingual bracket and lingual arch form in Korean. The subjects (Male: 50, Female: 50) were selected who have normal occlusion and dental casts were prepared. Tooth size, angulation, arch width, horizontal contour, lingual eminence were measured for all 28 teeth both upper and lower arch. The results were as follows: 1. Measuring items of all individual teeth for adults with normal occlusion were obtained. 2. In comparison tests, there was a statistically difference between intermolar widths $(\underline{6}\;to\;\underline{6})$ before occlusal reduction and intermolar width $(\underline{6}\;to\;\underline{6},\underline{7}\;to\;\underline{7})$ after occlusal reduction only all the other measuring items showed no statistically differences. 3. There was small variation in horizontal contour of lingual surface on lower incisors and upper and lower bicuspids. The other teeth showed somewhat greater variations. 4. There was offset between canine and bicuspid in upper arch while there was no prominent offset in lower arch.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1057-1066
• /
• 2001

This paper describes a design for linear polarization antenna using the EMCD (electromagnetically coupled dipole). The analysis and the design of model antennas are conducted by FDTD method. Vertical and horizontal linear polarizations are easily obtained by variation of dipole position. In 1-element antenna design, mutual coupling between microstrip feed line and radiator is considered. Design parameters of each 1-element antenna with vertical and horizontal polarization are used for array design. Radiation power and main beam tilting angle can be controlled by the offset and the distance between radiating elements in an array, respectively. 5-element array antennas are fabricated and measured to prove the design validity. The results of FDTD simulation and measurement show the reasonable agreement.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.142-150
• /
• 1996

Nowadays, as the development paeiod of new products becomes even shorter, the importance of Rapid Prototyping Technology(RPT) has been rapidly increased. The major application of RPT is an early verification of product designs and quick production of prototypes for testing. Moreover, RPT is applied not only as a second tooling process such as mold making and investment casting but also as a creating some physical structure in medical field. Despite the remarkable progress of RPT, it is required to improve various problems resulting from application such as production time, accuracy and materials. This paper presents a laser scan path generation for accuracy of stereolithographicparts The methodology of laser scan path generation is discussed based on the stereolithography, The procedure of this research is as follows : 1) Input laser scanning conditions such as a laser beam diameter and a laser scanning interval, 2) Reconstruct original contours without self intersecting offset, 3) Calculate offset about reconstructed contours, 4) Calculate intersection points between horizontal or vertical lines and offset contours for internal hatch, 5) Decide laser shutter on/off points. The algorithm developed and programmed by C language is verified as an efficient method after testing a number of STL files of mechanical parts.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.53-57
• /
• 2010

Low-density parity-check (LDPC) codes with belief-propagation (BP) algorithm achieve a remarkable performance close to the Shannon limit at reasonable decoding complexity. Conventionally, each iteration in decoding process contains two steps, the horizontal step and the vertical step. In this paper, an efficient implementation of the adaptive offset min-sum (AOMS) algorithm for decoding LDPC codes using the single-step method is proposed. Furthermore, the performances of the AOMS algorithm compared with belief-propagation (BP) algorithm are investigated. The algorithms using the single-step method reduce the implementation complexity, speed up the decoding process and have better efficiency in terms of memory requirements.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.534-537
• /
• 2006

The jacking of cantilever before key segment closure has been introduced to offset the long term forces caused by creep and shrinkage. In this paper, the behavior of structural system with the jacking force in approach bridge of Incheon Bridge was reviewed. The introduction of jacking force effectively offset the long term horizontal forces and allows economic substructure member design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.128-131
• /
• 2000

This paper describes design for dual-linear polarization antenna using EMC(electromagnetic-coupled) dipole. EMC dipole has a simple element structure and it is fed by microstrip line. Vortical and horizontal polarization are determined by structure of dipole fed by microstrip line. FDTD Method is used for an analysis of antenna element. Length, width, height and offset of dipole are designed for 1-element antenna. Resonant length of diploe differs from the calculated value by a formula because of coupling effect of dipole and feed line. Radiation Power is controlled by the offset of dipole. In prectical fabrication of antenna array, a constant height of dipoles is required. Therefore, the teflon plate with height of 0.8 mm is considered in antenna element design for the vertical polarization.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.70-76
• /
• 1996

In the Stereolithography process, three-dimensional objects are built by sequentially curing, generated by horizontal slicing of a three-dimensional CAD model. The dimensional accuracy of a menufactured part depends on the accuracy of curing performed by laser beam radius and the half of curing width. When offsetting, some slices have collinear segments, coincident vertices, line jerks and open loops. After remove above issues we have correct offsets data. And in last step, these data are used to scan paths.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2009

Groundwater flow due to intake of horizontal collector well in riverbank filtration site was analyzed by use of numerical groundwater modeling program (FEFLOW 5.1). Drawdowns of groundwater table nearby collector well were evaluated according to variations of several conditions; pumping rate, thickness of aquifer, offset distance from well to shore line of stream, conductance of streambed. It is observed that the drawdowns of groundwater table are clearly changed according to the variations of these conditions. The results of sensitive analysis shows that the thickness of alluvial aquifer and the offset distance are more sensitive than the conductance of streambed in evaluation of drawdown. This result implies that hydrogeological conditions, as like thickness of aquifer and its distribution in the site are important factors in site selection and evaluating the availability of riverbank filtration intake using horizontal collector well system. It is also revealed that numerical modeling using FEFLOW with 1-D discrete element feature can give efficient quantitative evaluation of horizontal collector well and estimation of availability of riverbank filtration site.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.4
• /
• pp.358-363
• /
• 2006

This paper demonstrates a new non-contact electronic joystick using single hall sensor which detects a horizontal vector of the magnetic field. Furthermore, in this paper, it is mathematically modeled that nonlinear characteristics between the output of hall sensor and the movement of joystick bar. The dynamic horizontal vector of magnetic flux is detected by the hall sensor while a permanent magnet is rotated with the joystick bar, which has two dimension detecting area. Using the nonlinear adjustment equations, the output signals of hall sensor have been linearized to give higher accuracy in the two dimension movement. Finally, through the real experiments, it is showed that the single hall sensor structure mechanism is superior to the dual sensor structure in sensing the two-dimensional motion without offset.