Design for Dual Polarization Antenna Element using Electromagnetic-Coupled Dipole

전자결합 다이폴을 이용한 편파공용 안테나 소자의 설계

  • 민경식 (한국해양대학교 전파공학과) ;
  • 서성기 (한국해양대학교 전파공학과) ;
  • 전종성 (한국해양대학교 전파공학과) ;
  • 박세현 (한국해양대학교 전파공학과) ;
  • 김동철 (한국해양대학교 전파공학과) ;
  • 임학규 (한국해양대학교 전파공학과) ;
  • Published : 2000.05.01

Abstract

This paper describes design for dual-linear polarization antenna using EMC(electromagnetic-coupled) dipole. EMC dipole has a simple element structure and it is fed by microstrip line. Vortical and horizontal polarization are determined by structure of dipole fed by microstrip line. FDTD Method is used for an analysis of antenna element. Length, width, height and offset of dipole are designed for 1-element antenna. Resonant length of diploe differs from the calculated value by a formula because of coupling effect of dipole and feed line. Radiation Power is controlled by the offset of dipole. In prectical fabrication of antenna array, a constant height of dipoles is required. Therefore, the teflon plate with height of 0.8 mm is considered in antenna element design for the vertical polarization.

Keywords