• 전기학회논문지
• /
• 제58권10호
• /
• pp.1936-1941
• /
• 2009

This paper deals with a new methodology for topology optimization in which the topology of the design domain may change during the shape optimization process. To achieve this, the concept of the topological gradient is introduced to compute the sensitivity of an objective function when a small hole is drilled in the domain. Based on shape and topological sensitivity values, the shape and topology of the design domain may be simultaneously changed during design iterations if necessary. To verify the advantages and also to facilitate understanding of the method itself, two electrostatic design problems have been tested by using 2D finite element analysis: the first is the inverse problem of a simple dielectric model and the second is the rotor design of a MEMS actuator.

• 산업공학
• /
• 제13권4호
• /
• pp.591-598
• /
• 2000

In this paper, an efficient algorithm is proposed to find parting lines(PL) and generate parting surfaces(PS) for an injection mold design. We used a Face-Edge Graph which can be made by B-rep information of solid model. The graph is useful for finding the peripheral-loop edges for PL and the inner-loop edges for hole-patch. The PS can be generated automatically by selecting pre-defined direction lines. We can create a core and cavity molds by trimming the raw stock block with the PS and the upper/lower faces of a product model. We implemented proposed method with Unigraphics API functions and C language, and tesed on Unigraphics V15.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.184-184
• /
• 2000

In this study, the lap welding between austenitic stainless steel and carbon steel was carried out using arc spot welding process and weldability of welded specimens was estimated. From the tensile-shear strength test, micro Vickers hardness test, and microstructure observation, specimen of 6.5mm(hole of upper plate) showed the best results in terms of tensile-shear strength and nugget shape. And there was an unmixed zone in fusion boundary between the carbon steel base metal and bulk weld metal. This zone had very thin width with the hard microstructure. The shape of weld nugget in arc spot welding of dissimilar metal welds was predicted by searching thermal history of a weld joint through a three-dimensional finite element model. From the numerical analysis, predicted the shape of weld nugget showed good agreement with the experiment(Received August 24, 1999)

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.57-63
• /
• 2000

In this study, the lap welding between austenitic stainless steel and carbon steel was carried out using arc spot welding process and weldability of welded specimens was estimated. From the tensile-shear strength test, micro Vickers harness test, and microstructure observation, specimen of $psi6.5mm$(hole of upper plate) showed the best results in terms of tensile-shear strength and nugget shape. And there was an unmix zone in fusion boundary between the carbon steel base metal and bulk weld metal. This zone had very width with the hard microstructure. The shape of weld nugget in arc spot welding of dissimilar metal melds was predicted by searching thermal history of a weld joint through a three-dimensional finite element model. From the numerical analysis, predicted the shape of weld nugget showed good agreement with the experiment.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.53-61
• /
• 1999

STL has several errors such as orientation error, hole error, and acute triangle error on being translated from CAD software. These errors should be corrected before using in Rapid Prototyping. So the software is necessary to correct errors. In this study, STL Editor which is a system for STL error correction and shape modification is developed and contains following characteristics. 1.Apply the triangle based data st겨cture. 2.Use the graphic user interface for easy work. 3.Use the Diet method to reduce data size. 4.Use the Delaunay triangulation method to enhance the quality of STL. 5.Modify the STL errors manually.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.7-14
• /
• 2023

In this study, we investigated the freezing delay time on surfaces with different patterns under -30° conditions through visualization experiments. Among various pattern structures, we fabricated the shape and surface of liquid from the spacing using circular filaments and hole structures. Additionally, using a high-speed camera, we visualized the freezing scenes, enabling us to obtain freezing images and measure the freezing time of the liquid. For each structure, the contact angle and solid fraction of the surface varied. We observed that the freezing delay time was longest when the contact angle was largest and the solid fraction was smallest within the experimental results. We analyzed the variation in anti-icing time using the heat exchange equation between the patterned surface and the liquid.

• 한국가스학회지
• /
• 제23권3호
• /
• pp.20-26
• /
• 2019

석탄 화력발전소 등의 대형 연소기기에서 질소산화물을 저감하기 위해 선택적 촉매환원 방법(SCR)의 탈질설비가 널리 쓰이고 있다. 본 연구에서는 SCR 탈질설비에서 암모니아를 공급하는 암모니아 분사 그리드(AIG)에 있는 암모니아와 희석 공기 혼합기에서 암모니아와 희석 공기의 균일한 혼합에 적합한 최적의 혼합기 형상을 도출하는 것을 목적으로 전산유체해석을 통해 수행하였다. 이를 위해 기본 형상의 혼합기(Case 1)에서 유동 특성과 $NH_3$ 농도 분포 특성을 살펴보았다. 기본 형상의 혼합기에서는 희석 공기 주 배관에서 암모니아 주입 배관 입구 반대쪽의 벽면으로 $NH_3$ 분포가 치우치는 것을 확인하였다. 이를 개선하기 위해 암모니아 주입 배관의 상단 구멍 1 개와 측면 구멍 4개를 막은 경우(Case 2)와 암모니아 주입 배관의 상단에 수평 평판을 설치한 경우(Case 3), 수평 평판과 함께 원호 평판을 설치 한 경우(Case 4)의 혼합기 형상에 대하여 유동과 $NH_3$ 농도 분포 특성을 분석하였다. 암모니아 주입 배관 상단에 수평 평판과 원호 평판을 설치한 경우(Case 4)에 혼합기 출구에서 $NH_3$ 분포의 % RMS 값이 가장 작은 값인 4.92%이고 농도 비율($R_{NH3}$) 범위가 -10.82~8.34%로 가장 최적의 $NH_3$ 균일 분포임을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.238-246
• /
• 1998

Surface residual stresses as well as wall thickness and ovality changes after U-bending process on UNS N06690 row-1 heat exchanger tubes, were estimated. Surface residual stresses were measured by Hole Drilling Method(HDM), calculating the stresses from relieved strains of 3 rosette strain gages. After bending of the tubes, dimensional tolerances for wall thickness and ovality were satisfied with ASTM requirements. Residual stresses at the extrados were introduced with compressive stress(-) by bending operations, and its maximum value reached-319 MPa in axial direction at ${\phi}=0^{\circ}$ in position. Tensile residual stresses(+) of ${\sigma}_zz=45$ MPa,${\sigma}_zz=25$ MPa were introduced in the intrados surface at position of ${\phi}=0^{\circ}$ Maximum tensile residual stress of 170 MPa was detected on the flank side at position of ,${\phi}=95^{\circ}$i.e., at apex region. It appeared that higher stress gradients were generated at the irregular transition regions. In the trend of residual stress changes with U-bend position, the extrados is related with the changes of ovality and the intrados is related with the changes of wall thickness.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.47-56
• /
• 2015

본 논문에서는 HDI(High Density Interconnection) 기판의 코어로 사용될 수 있는 카본 CCL(Copper Claded Layer)의 열거동 및 신뢰성 특성을 실험과 CAE를 이용한 수치해석을 통해 평가하였다. 카본 CCL의 특성평가를 위해 기존 FR-4 코어와 heavy cu 코어와 비교하였다. 연구결과에 의하면 pitch계열 카본코어가 적용된 PCB의 휨강도가 가장 높고 온도에 따른 변형량이 가장 낮았다. 또한, HDI 신뢰성평가 기준의 TC(Thermal Cycling), LLTS(Liquid-to-Liquid Thermal Shock), Humidity 실험을 통해 카본코어가 적용된 PCB는 신뢰성이 확보되었음을 확인하였다. 카본 파이버에 의한 불균일한 비아홀의 표면형상 여부와 드릴비트 마모 가능성을 분석하였는데 비아홀의 표면은 균일하고, 드릴비트의 표면도 매끄러워 카본 CCL의 우수한 드릴가공성도 확인하였다.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.54-62
• /
• 2016

이단 마이크로 할로우 음극 방전(MHCD) 플라즈마를 사용하는 마이크로 플라즈마 추력기(${\mu}PT$)에 대한 실험 연구가 수행되었다. 40 sccm의 아르곤 유량과 10 W 미만의 전력으로 보다 더 직진성 있고 긴 침투 길이를 가진 배기 플룸을 만드는 정전기적 가속이 이단 MHCD에 의해 발생되었다. 전압-전류 특성에서는 이단 운전 시 두 번째 단의 가속 전압이 일정하게 되는 최적 영역이 있음을 보였다. 추정된 배기 플룸의 길이가 가속 전압으로 추산된 이론적 배출 속도와 비슷한 증가 경향을 보였다. 다중 채널을 가진 마이크로 플라즈마 추력기는 동일한 총 전력량에 대하여 단일 채널 추력기와 비슷한 특성을 보여, 이는 채널 당 허용 전력량을 낮춰 전체 전력량을 높일 수 있음을 의미한다. 아르곤 원자 분광선의 볼츠만 그래프에서 배기 플룸의 평균 전자 여기 온도는 약 2.6 eV(=약 30,170 K)임이 확인되었다.