• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.63-66
• /
• 2003

In this paper, the electrical characteristics of single oxide layer due to high temperature diffusion process, wafer resistivity and thickness of poly backseat was researched. The oxide quality was examined through capacitance-voltage characteristics, and besides, it will be describe the capacitance-voltage characteristics of the single oxide layer by semiconductor device simulation.

• 한국표면공학회지
• /
• 제54권5호
• /
• pp.207-212
• /
• 2021

The mechanical and electrical characteristics can be improved in 3D stacked IC technology which can accomplish the ultra-high integration by stacking more semiconductor chips within the limited package area through the Cu direct bonding method minimizing the performance degradation to the bonding surface to the inorganic compound or the oxide film etc. The surface was treated in a ultrasonic washer using a diamond abrasive to remove other component substances from the prepared cast plate substrate surface. FE-SEM was used to analyze the bonding characteristics of the bonded copper substrates, and the cross section of the bonded Cu conjugates at the sintering junction temperature of 100 ℃, 150 ℃, 200 ℃, 350 ℃ and the pressure of 2303 N/cm² and 3087 N/cm². At 2303 N/cm², the good bonding of copper substrate was confirmed at 350 ℃, and at the increased pressure of 3087 N/cm², the bonding condition of Cu was confirmed at low temperature junction temperature of 200 ℃. However, the recrystallization of Cu particles was observed due to increased pressure of 3087 N/cm² and diffusion of Cu atoms at high temperature of 350 ℃, which can lead to degradation in semiconductor manufacturing.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.124-128
• /
• 2005

To produce a highly sensitive uncooled microbolometer, the development of a high-performance thermometric material is essential. In this work, amorphous vanadium-tungsten oxide was developed as a thermometric material at a low temperature of $300^{\circ}C$, and the microbolometer, coupled with the material, was designed and fabricated using surface micromachining technology. The vanadium-tungsten oxide showed good properties for application to the microbolometer, Such as a high temperature coefficient of resistance of over -4.0 $\%$/K and good compatibility with the surface micromachining and integrated circuit fabrication process due to its low fabrication temperature. As a result, the uncooled microbolometer could be fabricated with high detectivity over $1.0\;{\times}\;10^9\;cmHz^{1/2}/W$ at a bias current of $7.5\;{\mu}A$ and a chopper frequency of 10-20 Hz

• 반도체디스플레이기술학회지
• /
• 제2권3호
• /
• pp.7-11
• /
• 2003

In this research, the etching characteristics of via contact and deep contact hole have been studied using multi-pole inductively coupled plasma(MICP) etching system. We investigated Plasma density of MICP source using the Langmuir probe and etching characteristics with RF frequency, wall temperature, chamber gap, and gas chemistry containing Carbon and Fluorine. As the etching time increases, formation of the polymer increases. To improve the polymer formation, we controlled the temperature of the reacting chamber, and we found that temperature of the chamber was very effective to decrease the polymer thickness. The deep contact etch profile and high selectivity(oxide to photoresist) have been achieved with the optimum mixed gas ratio containing C and F and the temperature control of the etching chamber.

• 한국재료학회지
• /
• 제25권7호
• /
• pp.347-351
• /
• 2015

To study the characteristics of ZTO, which is made using a target mixed $ZnO:SnO_2=1:1$, the ZnO and $SnO_2$ were analyzed using PL, XRD patterns, and electrical properties. Resulting characteristics were compared with the electrical characteristics of ZnO, $SnO_2$, and ZTO. The electrical characteristics of ZTO were found to improve with increasing of the annealing temperature due to the high degree of crystal structures at high temperature. The crystal structure of $SnO_2$ was also found to increase with increasing temperatures. So, the structure of ZTO was found to be affected by the annealing temperature and the molecules of $SnO_2$; the optical property of ZTO was similar to that of ZnO. Among the ZTO films, ZTO annealed at the highest temperature showed the highest capacitance and Schottky contact.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.59-63
• /
• 2002

This paper reports on the fabrication process and characteristics of a ceramic thin-film pressure sensor based on Ta-N strain-gauges for harsh environment applications. The Ta-N thin-film strain-gauges are sputter-deposited on a thermally oxidized micromachined Si diaphragms with buried cavities for overpressure tolerance. The proposed device takes advantage of the good mechanical properties of single-crystalline Si as a diaphragm fabricated by SDB and electrochemical etch-stop technology, and in order to extend the temperature range, it has relatively higher resistance, stability and gauge factor of Ta-N thin-films more than other gauges. The fabricated pressure sensor presents a low temperature coefficient of resistance, high-sensitivity, low non-linearity and excellent temperature stability. The sensitivity is 1.21 ~ 1.097 mV/V.kgf/$\textrm{cm}^2$ in temperature ranges of 25~ $200^{\circ}C$ and a maximum non-linearity is 0.43 %FS.

• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.110-114
• /
• 2020

In this paper, a heat pump using a Peltier device was developed for heat dissipation in a sealed electric box. The heat pump was designed with a cooling fin attached to both sides of the Peltier device, and a fan was mounted on the cooling fin on the hot side to increase the efficiency. The heat dissipation efficiency could be improved by directly connecting the electronic component having high heat to the cooling fin using a heat conducting wire. The fabricated heat pump was designed to operate only in the temperature range set by the temperature control system to improve the problem of high power consumption of the Peltier element.

• 세라미스트
• /
• 제21권1호
• /
• pp.44-54
• /
• 2018

Oxide semiconductor has been spotlighted as a channel material of TFTs in AMLCD as an alternative to Si, due to high mobility ( > $5cm^2/Vs$). It is also one of the strong candidates for TFTs in AMOLED because of high bias stability at amorphous phase. Beyond the advantages mentioned above, oxide semiconductor has many strengths such as transparency, low fabrication temperature and relatively low fabrication cost. For those reasons, the application of oxide semiconductor is not limited to display but can be extended to new types of electronics, for example, transient electronics for human implantable devices. From this context, oxide materials that have been used as semiconductor and insulator at transient electronics are investigated respectively, and conductor and substrate candidates are also explained, since transient electronics require systematic consideration beyond individual oxide films.

• 한국산학기술학회논문지
• /
• 제3권4호
• /
• pp.290-294
• /
• 2002

본 논문은 반도체 패키징 제조에서 사용되고 있는 반도체 금형을 CAD/CAM을 활용하여 직접 제작하였다. 원래 반도체 금형은 강도와 열성이 아주 좋은 ASP23 재질을 사용하며 매우 고가이다. 또한 특수도금, 열처리와 정밀한 가공이 되어야 정상적인 반도체 패키징을 할 수 있다. 제작 과정은 CAD/CAM을 활용하여 직접 제작하였으므로 반도체 금형의 제작 방향을 제시하는 계기가 되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1715-1718
• /
• 2007

New ITO thin film of good performance has been developed by brand-new, plasma-damage-free sputtering process at the room temperature. The room temperature-processed ITO films with optimized conditions as neutral beam acceleration bias of -30V and In & Sn composition ratio of 99:01 gives lower resistivity as $4.22{\times}10^{-4}{\Omega}-cm$ and higher transmittance over 90% a wavelength of 550 nm. The transmission electron microscope (TEM) images of the films show a nano-crystalline structure.