• Journal of Korea Water Resources Association
• /
• v.50 no.12
• /
• pp.849-862
• /
• 2017

The increased frequency of meteorological disasters has been observed due to increased extreme events such as heavy rainfalls and flash floods. Numerous studies using high-resolution weather radar rainfall data have been carried out on the hydrological effects. In this study, a conditional merging technique is employed, which makes use of geostatistical methods to extract the optimal information from the observed data. In this context, three different techniques such as kriging, inverse distance weighting and spline interpolation methods are applied to conditionally merge radar and ground rainfall data. The results show that the estimated rainfall not only reproduce the spatial pattern of sub-hourly rainfall with a relatively small error, but also provide reliable temporal estimates of radar rainfall. The proposed modeling framework provides feasibility of using conditionally merged rainfall estimation at high spatio-temporal resolution in ungauged areas.

• Korean Journal of Remote Sensing
• /
• v.35 no.4
• /
• pp.517-534
• /
• 2019

In abrupt fire disturbances, high quality images suitable for wildfire damage assessment can be difficult to acquire. Quantifying wildfire burn area and severity are essential measures for quick short-term disaster response and efficient long-term disaster restoration. Planetscope (PS) imagery offers 3 m spatial and daily temporal resolution, which can overcome the spatio-temporal resolution tradeoff of conventional satellites, albeit at the cost of spectral resolution. This study investigated the potential of augmenting PS imagery by integrating the spectral information from Sentinel-2 (S2) differenced Normalized Burn Ratio (dNBR) to PS differenced Normalized Difference Vegetation Index (dNDVI) using histogram matching,specifically for wildfire burn area and severity assessment of the Okgye wildfire which occurred on April 4th, 2019. Due to the difficulty in acquiring reference data, the results of the study were compared to the wildfire burn area reported by Ministry of the Interior and Safety. The burn area estimates from this study demonstrated that the histogram-matched (HM) PS dNDVI image produced more accurate burn area estimates and more descriptive burn severity intervals in contrast to conventional methods using S2. The HM PS dNDVI image returned an error of only 0.691% whereas the S2 dNDVI and dNBR images overestimated the wildfire burn area by 5.32% and 106%, respectively. These improvements using PS were largely due to the higher spatial resolution, allowing for the detection of sparsely distributed patches of land and narrow roads, which were indistinguishable using S2 dNBR. In addition, the integration of spectral information from S2 in the PS image resolved saturation effects in areas of low and high burn severity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.5
• /
• pp.333-342
• /
• 2012

We studied the characteristics of spatial distribution of global wave height and carried out the modelsensitivity test by changing the input field, model resolution and physical factor (effective wind factor) since the spatial and temporal resolution in wind wave forecasting is one of most important factors. Comparisons among the different cases, and also between model, buoy and satellite data have been made. As a results of the wind-wave model run using the high resolution wind field, the bias of significant wave height showed the positive tendency and the Root-Mean Square Error(RMSE) was a bit decreased based on the comparison with buoy data. When the model resolution was changed to higher, the bias and RMSE was increased, and as the effective wind factor was smaller than default value(= 1.4) the bias and RMSE showed also decreasing pattern.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.29-38
• /
• 2010

It is necessary to develop an integration model which can account for various data acquired at different measurement scales in environmental thematic mapping with high-resolution ground survey data and relatively low-resolution remote sensing data. This paper presents and applies a multi-scale geostatistical methodology for downscaling of thematic maps generated from lowresolution remote sensing data. This methodology extends a traditional ordinary kriging system to a block kriging system which can account for both ground data and remote sensing data which can be regarded as point and block data, respectively. In addition, stochastic simulation based on block kriging is also applied to describe spatial uncertainty attached to the downscaling. Two downscaling experiments including SRTM DEM and MODIS Leaf Area Index (LAI) products were carried out to illustrate the applicability of the geostatistical methodology. Through the experiments, multi-scale geostatistics based on block kriging successfully generated relatively high-resolution thematic maps with reliable accuracy. Especially, it is expected that multiple realizations generated from simulation would be effectively used as input data for investigating the effects of uncertain input data on GIS model outputs.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.135-142
• /
• 2013

This study aims to seek adequate and optimized method of applying high quality three-dimensional spatial data created via high-resolution digital aerial photograph image and aerial LiDAR data onto three-dimensional planning of environmentally friendly, ecological restoration of rivers in accordance with irrigation and flood control objectives of urban rivers. Through three-dimensional modeling of before and after the restoration, the research also offers basic information regarding restorations of rivers. Also the transition from the conventional two-dimensional planning into three-dimensional planning environment using smart spatial information acquire accuracy of river analysis, analyze possible civil complaints and suggest solutions to potential problems.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.13-22
• /
• 2006

Realistic 3D building construction in urban area has become an important issue because of increasing demand of 3D geo-spatial information in many application. Contrary to the conventional 3D building model construction approach using aerial images and high-resolution satellite imagery, it has been researched widely in building reconstruction using high-accuracy aerial LIDAR data in the latest. This paper presents a method for 3D building construction through building outlines extraction by LoG operator's Zero-crossing and line generation and refinement by Douglas-Peucker algorithm.

• Atmosphere
• /
• v.21 no.2
• /
• pp.173-183
• /
• 2011

Production of reanalysis data is important since it contributes to develop all fields of atmospheric sciences and to profit national economy. The developed countries such as USA, EU, and Japan have manufactured the global reanalysis data since the 1990s, but their data present a lack of detailed regional climates. For those who need to analyze the regional climate in/around Korea, a high-resolution reanalysis data should essentially be made. This study reviewed the existing reanalysis data and the applications, and the available observations for the data production. We also investigated the opinions and needs of the potential data users in Korea. We suggest the specifications of the data to have the domain of 55-5N, 80-150E (which includes Mongolia and most Southeast Asian countries), the spatial resolution of 10-20 km, and the period of most recent 30 years. With the specifications and climate models operated in KMA, this study argues that production of the reanalysis data with functional climate information is feasible in both technical and economic aspects. Finally, for successful data production, the framework of the future reanalysis data project was suggested.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.91.1-91.1
• /
• 2013

Since 2010, we have improved the Fast Imaging Solar Spectrograph (FISS) and observed the Sun. From the early observations we noticed two instrumental problems: poorer spatial resolution due to chromatic aberration and lower light level in the Ca II band. We tried to overcome these problems in two ways. First, we updated the relay optics. With the new one, we don't find any noticeable chromatic aberration between Ha and CaII and as a result can obtain the high resolution data in Ca II as well. Second, we replaced mirrors and the grating. This resulted in the increase of light level by a factor of up to 2.5, and hence in the high S/N ratio. The images constructed from the recentest observations indicate that the performance of the FISS is now much closer to our original intention than at the beginning.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.698-701
• /
• 2006

Remotely sensed data have been utilized efficiently for damage detection immediately after the natural disaster since they provide valuable information on land cover change due to spatial synchronization and multitemporal observation over large areas. Damage information obtained at an early stage is important for rapid emergency response and recovery works. Many useful techniques to analyze the characteristics of the pre- and post-event satellite images in large-scale damage detection have been successfully investigated for emergency management. Since high-resolution satellite images provide a wealth of information on damage occurred in urban areas, they are successfully utilized for damage detection in urban areas. In this research, a method to perform automated damage detection is proposed based on the differences of the textural characteristics in pre- and post- high resolution satellite images.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.229-233
• /
• 2007

This study is to test the applicability of QuickBird image for non-point source pollution assessment. SWAT (Soil and Water Assessment Tool) model was adopted and the model was calibrated for a stream watershed of 255.4 $km^2$ Landsat land use data. For model application with QuickBird image, a precise agricultural land use map of 1.16 $km^2$ area located in the upstream watershed was produced by field investigation. The model was run with the combination of land use and soil map scales (1:5,000, 1:25,000 and 1:50,000). The results were compared and analyzed for the contribution of non-point source pollution by the land use scale and contents.