• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.31-37
• /
• 1994

Aluminum films were deposited by the pyrolysis of triisobutylaluminum(TIBA) in a cold wall LPCVD system for the metallization of high level IC. the selectivity on Si/SiO2 substrate and the contact resistance on submicron contacts were investigated. The carbon free aluminum film could be obtained when the aluminum film was deposited at low substrate temperature. Contact resistances of CVD Al/n+ Si contacts whose contact size was 0.5 .mu.m werre as low as 20~40.OMEGA./ea, which is 30~50% of contact resistance obtained by sputtering technique.

• Convergence Security Journal
• /
• v.15 no.5
• /
• pp.61-70
• /
• 2015

North Korea invaded South Korea on June 25, 1950 and the armistice agreement was reached on July 27, 1953. After that, there have been about 5,000 provocations large and small. In particular, North Korea attacked a naval vessel called "Cheonanham" on March 26, 2010. After the attack, Korean government announced the sanctions against North Korea, so called "May 24 sanctions". North Korea bombarded Yeonpyeong provocation on November 23, 2010 and they planted wood box mines in the DMZ on August 4, 2015. The explosion of them resulted in injuring two Korean soldiers. In response to this accident, Korean government resumed loudspeaker broadcasting against North Korea in 11 years which had developed as the psychological warfare. After this, North Korea declared "being a state of war" and intensified tension. Suddenly North Korea suggested talks and two countries reached an agreement through inter-Korean high-level contacts. But we should review whether the agreement was reached with ease and in haste. This paper focuses on the North Korea's negotiating tactics and suggests our corresponding directions for the future.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.294.1-294.1
• /
• 2016

Transition metal dichalcogenides (TMDs) with two-dimensional layered structure, such as molybdenum disulfide (MoS2) and tungsten diselenide (WSe2), are considered attractive materials for future semiconductor devices due to its relatively superior electrical, optical, and mechanical properties. Their excellent scalability down to a monolayer based on the van der Waals layered structure without surface dangling bonds makes semiconductor devices based on TMD free from short channel effect. In comparison to the widely studied transistor based on MoS2, researchs focusing on WSe2 transistor are still limited. WSe2 is more resistant to oxidation in humid ambient condition and relatively air-stable than sulphides such as MoS2. These properties of WSe2 provide potential to fabricate high-performance filed-effect transistor if outstanding electronic characteristics can be achieved by suitable metal contacts and doping phenomenon. Here, we demonstrate the effect of two different metal contacts (titanium and platinum) in field-effect transistor based on WSe2, which regulate electronic characteristics of device by controlling the effective barreier height of the metal-semiconductor junction. Electronic properties of WSe2 transistor were systematically investigated through monitoring of threshold voltage shift, carrier concentration difference, on-current ratio, and field-effect mobility ratio with two different metal contacts. Additionally, performance of transistor based on WSe2 is further enhanced through reliable and controllable n-type doping method of WSe2 by triphenylphosphine (PPh3), which activates the doping phenomenon by thermal annealing process and adjust the doping level by controlling the doping concentration of PPh3. The doping level is controlled in the non-degenerate regime, where performance parameters of PPh3 doped WSe2 transistor can be optimized.

• Management & Information Systems Review
• /
• v.24
• /
• pp.97-124
• /
• 2008

This study aimed to explore how the involvement of environment influenced eight subjects group. Thus, experiment was performed to clarify the role that the attitude of university student consumer plays in the communication process depending on the level of engagement of consumer in the environment and method to raise donation for preservation of environment. Analyzing as per the type of appeal, the mark in altruistic appeal type was higher in all variables than egoistic appeal type. Finally, checking the average mark of each variable as per the condition of donation, the value in unconditional donation was higher than in all variables than conditional donation. It was found 3 groups composed of 2 groups with high level of environmental engagement and 1 group with low level of environmental engagement were suitable to double mediation model among the 8 experimental groups. The group where double mediation model best corresponds than any other group was high level related to environment and the group that contacts altruistic appeal and the message in the form of conditional donation. It was also found that the group that has low level of environmental engagement and contacts egoistic appeal type and conditional donation shows the group that corresponds to double mediation model in the second place among the 8 groups. Finally, it was found that the group that has high level of environmental engagement and is stimulated by altruistic appeal and unconditional donation corresponds to double mediation model. Depending on the condition of message stimulation, unconditional donation is found to better correspond to double mediation model than conditional donation. However, opposite phenomena is observed when the level of environmental engagement is high and appeal type is egoistic. Namely, it was found that conditional donation better corresponds to double mediation model than unconditional donation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.05a
• /
• pp.43-45
• /
• 1988

Four W/Cu system(60wt%W-40wt%Cu, -0.lwt%Ni, -0.5wt%Ni, -0.lwt%C) and four WC/Cu system(60wt%WC-40wt%Cu, -0.lwt%Ni, -0.5wt%Ni, 0.lwt%C) electrical contacts were prepared by a press-sinter-infiltration process to compare with their properties. Hardness and electrical conductivity are proportional to the refractory metal(W or WC) properties and showed the effect of additives. Arc erosion trend of switch test is changed by current level. High currant test at 1kA showed a different crack formation pattern and erosion mode between W/Cu system and WC/Cu system contacts.

• Research in Community and Public Health Nursing
• /
• v.14 no.3
• /
• pp.468-478
• /
• 2003

Purpose: The purpose of this study is to identify the relationship among sexual contact, sex role identification, and self esteem in Korean girls' high school students. Methods: The data were collected from 522 girls, who were stratified samples from a target population of 63,375 11th grade students from 200 regular high schools and 70 vocational high schools in Seoul, Korea from June 22 to July 18, 2002. Data were processed with the SAS program. Results: It was found that 42.51% of girls haven't experienced any sexual contact at all. The highest frequency in the final level of sexual contact was 'kiss', which was 22.03%. The 'androgyny' type among sex role identities of girls was most common, 32.57%, being followed by the 'undifferentiated' type 31.61%, the 'masculinity' type 18.97%, and the 'femininity' type 16.86, in that order. The sexual contacts such as 'holding hands', 'arms around', 'embracing', and 'kiss' were significantly different depending on sex role identity types. The score for self-esteem was significantly different depending on sex role identity types. The score for self- esteem was not significantly different depending on the final level of sexual contact. Conclusion: Based on the findings of this study, sex education programs should be developed in order to delay the sexual contacts of girls.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.37-46
• /
• 2003

This paper is to predict quality deterioration resulting from a caulking process of yoke which is a part of automotive steering system. The caluking is a plastic deformation process involving such as impact of high speed tool, contacts between part and fixtures and strain rate sensitivity of the part material. Elaborate application of finite element method is neccesary to calculate changes of part dimensions because they fall into a level of tolerances. Simple work hardening and strain rate sensitive model is proposed fur the material and applied for the simulation by using Abaqus which is able to cater for elastoplastic rate sensitive material and contacts. Numerical results of test models that represent tensile bar and tensile plate are compared with material data inputs. Dimensional changes for the yoke are calculated from simulations and compared to the mesurements and they show good agreement. The method presented here with the material model proved to be valuable to assess quality deterioration for similar metal forming processes.

• Journal of the Korean Institute of Educational Facilities
• /
• v.2 no.1
• /
• pp.15-26
• /
• 1995

This paper discussed non-physical factors, such as the level of use of organizational channels and the level of R&D investment of the firm. It also explored physical factors such as the distance between the university and industry, transportation conditions between the two, and the availability (surplus capacity) of professors' or firms' research facilities that would affect the interaction such as the contacts in connection with research grants and consultations by professors to high-tech firms. This paper pointed out that the use of organization channel, the level of R&D investment, the availability research facilities of the university and high-tech firm, transportation conditions between the two, subject matter compatibility between professors' areas of expertise and firms' industrial activities, professors' (or staff) research capabilities and professors' (or staff) research times affect the interaction between the university and industry. It also found that the distance between the university and industry affects the interaction between the two in the opposite direction.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1138-1142
• /
• 2007

As a brush DC motor, the brushless DC motor is also operated by DC power supply but has no mechanical contacts occurred by a brush or a commutator. Though the performance of BLDC motor is almost similar with that of DC motor, the BLDC motor has the advantage of the high speed responsibility, the high controllability, and the high effectiveness. The control valve using the BLDC motor, which excludes the burnout effect provoked possibly by the vacuum condition during the flight, is employed for the upper stage of a launch vehicle. For the component level analysis, the dynamic response characteristics of BLDC and DC motors to the same design input sources have been studied in using AMEsim.

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.1
• /
• pp.16-21
• /
• 2012

SAW device is widely used as filters, sensors, actuators in various technologies. And capacitive sensor is tremendously used to measure pressure, gap, etc. The application of SAW device as signal conditioner of capacitive sensor reduces noise level and enables high precision measurement. The response increase of SAW based capacitive sensor is produced just before the two capacitive electrode contacts by the existence of parasitic resistance of capacitive electrode. In this paper, we analyze the effects of parasitic resistance and propose the calibrating method using lumped component and execute the high precision gap measurement using calibrated system. And xx nm resolution and yy ${\mu}m$ stroke was attained.