• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.213-219
• /
• 2010

Recently, a multi-core system is studied for single terminal's operations on various service networks for mobile systems. Therefore, it is expected that mobile systems capable of supporting WCDMA, MC-CDMA, CDMA and WiBro would be developed. Mobile systems for supporting various service networks is able to be implemented on a single chipset via SoC(System one Chip) technology, thus a noble modem design proper for SoC technology is necessary. For high speed data transmission of 4G mobile communication services, OFDM scheme has to be applied. But, an OFDM signal consists of a number of independently modulated subcarriers, and superposition of these subcarriers cause a problem that can give a large PAPR. In this paper, a noble modem design for 4G mobile communication services and PAPR reduction method for solving the PAPR problem are proposed.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.6
• /
• pp.13-20
• /
• 2009

The purpose of this study is to analyze the configuration and properties of university campus cores for systematic approach and planning through space syntax based on master plans of 55 universities in Korea. The results of this study showed that: first, the campus cores were classified into 10 types through axial map analysis. They were '一 type', '二 type', 'ㄱ type', 'T type', '+ type', 'radiation type', 'grid type', 'polygon type', 'tree structure type' and 'combination type'.(table 7) The frequency of '一 type' was the highest by 27.2%, and 'radiation type' was the next by 14.5%; second, the integration value was 2.03(+ type), te90(grid type), te75(ㄱ type), te74(一 type), te67(二 type), te63(T type), te46(polygon type), te347(tree structure type) and te343(radiation type).(table 9) We could categorize the 'radiation type' and the 'tree structure type' as the first group, the 'polygon type' as the second group, the 'T type', the '二 type', the '一 type', and the 'ㄱ type' as the third group, the 'grid type' as the fourth group, the '+ type' as the fifth group; third, cases that the integration value of access road was very low(58.2%) was much more frequent than that of very high(32.7%); fourth, the most important space in the campus core were as follows: library and media center(18.1%), administration buildings and headquarters(15.7%), student center(15.7%), lecturing building(13.9%), streets and squares(13.3%).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.49-55
• /
• 2016

To separate the CM and DM noise in the EMI generated in various electrical electronic systems, passive and active separators have been researched. These separators are an important part of an effective active EMI-filter. The passive separator has some advantages, in that it is easy to realize at a low price and its structure is very simple. However, its major drawback is that its accurate inductor realization and accurate core selection are very difficult. The active separator is smaller in size and more accurate, but its main drawback is that an op-amp which has a broad band frequency response is necessary, its cost is high, and a DC power circuit is required. This paper compares the characteristics of EMI filters which apply the existing passive separator and proposed active separator. It was concluded that an active separator is needed for expensive and accurate equipment, whereas a passive separator is sufficient for inexpensive and general purpose EMI filters.

• Journal of dental hygiene science
• /
• v.21 no.1
• /
• pp.70-78
• /
• 2021

Background: The aim of this study was to analyze the public demand for information about the job of dental hygienists by mining text data collected from the online Q & A section on an Internet portal site. Methods: Text data were collected from inquiries that were posted on the Naver Q & A section from January 2003 to July 2020 using "dental hygienist job recognition," "role recognition," "medical assistance," and "scaling" as search keywords. Text mining techniques were used to identify significant Korean words and their frequency of occurrence. In addition, the association between words was analyzed. Results: A total of 10,753 Korean words related to the job of dental hygienists were extracted from the text data. "Chi-lyo (treatment)," "chigwa (dental clinic)," "ske-illing (scaling)," "itmom (gum)," and "chia (tooth)" were the five most frequently used words. The words were classified into the following areas of job of the dental hygienist: periodontal disease treatment and prevention, medical assistance, patient care and consultation, and others. Among these areas, the number of words related to medical assistance was the largest, with sixty-six association rules found between the words, and "chi-lyo," "chigwa," and "ske-illing" as core words. Conclusion: The public demand for information about the job of dental hygienists was mainly related to "chi-lyo," "chigwa," and "ske-illing" as core words, demonstrating that scaling is recognized by the public as the job of a dental hygienist. However, the high demand for information related to treatment and medical assistance in the context of dental hygienists indicates that the job of dental hygienists is recognized by the public as being more focused on medical assistance than preventive dental care that are provided with job autonomy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.353-358
• /
• 2022

Bulky iron-core potential transformers (PT) are installed in a tank of gas insulated switchgears (GIS) for a system voltage measurement in power substations. In this paper, we studied an electronic voltage transformer (EVT) embedded in a spacer for miniaturization, eco-friendliness, and performance improvement of GIS. The prototype EVT consists of a capacitive probe (CP) that can be embedded in a spacer and a voltage Follower with a high input and a low output impedance. The CP was fabricated in the form of a Flexible-PCB to acquire the insulation performance and to withstand vibration and shock during operation. Voltage ratio of the prototype EVT is about 42,270, and the frequency bandwidth of -3 dB ranges from 0.33 Hz to 3.9 MHz. The voltage ratio error evaluated at about 6%, 12% and 18% of the rated voltage of 170 kV was 0.32%, and the phase error was 12.9 minutes. These results were within the accuracy for the class 0.5 specified in IEC 60044-7 and satisfy even in ranges from 80% to 120% of the rated voltage. If the prototype EVT replaces the conventional iron-core potential transformer, it is expected that the height of the GIS could be reduced by 11% and the amount of SF₆ will be reduced by at least 10%.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.5
• /
• pp.197-209
• /
• 2010

The present state of the IT industry show workers with core capability KSA required by the IT industry having a high frequency of leaving for other industries or having the intention of doing so. This is not beneficial for the worker's career as well as the entire IT industry. Therefore, the purpose of this research is to support the development and management of IT human resources by selecting self-efficacy along with core capability KSA as the variables for researching career commitment and career change intentions. The results are as follows. It was found that the technical KSA and behavioral KSA of IT workforce influences self-efficacy. Self-efficacy has a significant effect on career commitment. It was found that managerial KSA has no effect on self-efficacy and career commitment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.70-77
• /
• 2013

We suggest a low area and high efficiency switched-mode power supply (SMPS) with a pulse width modulation (PWM) generator based on a pseudo relaxation-oscillating technique. In the proposed circuit, the PWM duty ratio is determined by the voltage slope control of an internal capacitor according to amount of charging current in a PWM generator. Compared to conventional SMPSs, the proposed control method consists of a simple structure without the filter circuits needed for an analog-controlled SMPS or the digital compensator used by a digitally-controlled SMPS. The proposed circuit is able to operate at switching frequency of 1MHz~10MHz, as this frequency can be controlled from the selection of one of the internal capacitors in a PWM generator. The maximum current of the core circuit is 2.7 mA, and the total current of the entire circuit including output buffer driver is 15 mA at 10 MHz switching frequency. The proposed SMPS has a simulated maximum ripple voltage of 7mV. In this paper, to verify the operation of the proposed circuit, we performed simulation using Dongbu Hitek BCD $0.35{\mu}m$ technology and measured the proposed circuit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.4
• /
• pp.286-297
• /
• 2017

This paper is a study of 6~18 GHz wideband high power amplifier which is composed of 10 single amplifier and coaxial type spatial power combiner. The property of this spatial power combiner is on a similar principle to antipodal antenna radiation mechanism. Therefore, the key structure of proposed spatial power combiner is the antipodal finline PCB board and the finline curve shape is numerically synthesized by using Klopfensein's optimum impedance taper. The measured CW output power of spatial combined high power amplifier is nearly 50 W. In conclusion we prove the good combining performance between the spatial power combiner and 10 single amplifier over 6~18 GHz frequency ranges. Also, we developed the key component PA and MFC MMIC which controls the phase and gain of the each amplifier, The main characteristic of MFC MMIC is to maximize combining efficiency of power amplifier.

• Convergence Security Journal
• /
• v.19 no.3
• /
• pp.43-50
• /
• 2019

In a hyper-connected society, electric power infrastructures and information and communication infrastructures are the core of critical national infrastructures. However, electric power infrastructure is very deadly to high-frequency nuclear electromagnetic pulse (HEMP) threats recently issued by North Korea, so the resilience through rapid recovery after attack is directly related to the survivability of our country. Therefore, electric power infrastructure should take precedence over any other key infrastructure, with preemptive protection measures and fast recovery plans. In this paper, the characteristics of the HEMP threats was examined, and the risks and effective major protection measures of the electric power infrastructures are discussed. In the future, it is expected that it will be able to help establish the direction of enactment and revision of legal schems related to the 'high power EMP infringement prevention' for Korea's electric power infrastructures.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.280-290
• /
• 2002

Three-dimensional (3-D) electromagnetic (EM) modeling algorithm has been developed using finite element method (FEM) to acquire more efficient interpretation techniques of EM data. When FEM based on nodal elements is applied to EM problem, spurious solutions, so called 'vector parasite', are occurred due to the discontinuity of normal electric fields and may lead the completely erroneous results. Among the methods curing the spurious problem, this study adopts vector element of which basis function has the amplitude and direction. To reduce computational cost and required core memory, complex bi-conjugate gradient (CBCG) method is applied to solving complex symmetric matrix of FEM and point Jacobi method is used to accelerate convergence rate. To verify the developed 3-D EM modeling algorithm, its electric and magnetic field for a layered-earth model are compared with those of layered-earth solution. As we expected, the vector based FEM developed in this study does not cause ny vector parasite problem, while conventional nodal based FEM causes lots of errors due to the discontinuity of field variables. For testing the applicability to high frequencies 100 MHz is used as an operating frequency for the layer structure. Modeled fields calculated from developed code are also well matched with the layered-earth ones for a model with dielectric anomaly as well as conductive anomaly. In a vertical electric dipole source case, however, the discontinuity of field variables causes the conventional nodal based FEM to include a lot of errors due to the vector parasite. Even for the case, the vector based FEM gave almost the same results as the layered-earth solution. The magnetic fields induced by a dielectric anomaly at high frequencies show unique behaviors different from those by a conductive anomaly. Since our 3-D EM modeling code can reflect the effect from a dielectric anomaly as well as a conductive anomaly, it may be a groundwork not only to apply high frequency EM method to the field survey but also to analyze the fold data obtained by high frequency EM method.