• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.1-9
• /
• 2008

In the first part of the paper, Computational Fluid Dynamics analysis of the combusting flow within a high-swirl lean premixed gas turbine combustor and over the $1^{st}$ row nozzle guide vanes is presented. In this analysis, the focus of the investigation is the fluid dynamics at the combustor/turbine interface and its impact on the turbine. The predictions show the existence of a highly-rotating vortex core in the combustor, which is in strong interaction with the turbine nozzle guide vanes. This has been observed to be in agreement with the temperature indicated by thermal paint observations. The results suggest that swirling flow vortex core transition phenomena play a very important role in gas turbine combustors with modern lean-premixed dry low emissions technology. As the predictability of vortex core transition phenomena has not yet been investigated sufficiently, a fundamental validation study has been initiated, with the aim of validating the predictive capability of currently-available modelling procedures for turbulent swirling flows near the sub/supercritical vortex core transition. In the second part of the paper, results are presented which analyse such transitional turbulent swirling flows in two different laboratory water test rigs. It has been observed that turbulent swirling flows of interest are dominated by low-frequency transient motion of coherent structures, which cannot be adequately simulated within the framework of steady-state RANS turbulence modelling approaches. It has been found that useful results can be obtained only by modelling strategies which resolve the three-dimensional, transient motion of coherent structures, and do not assume a scalar turbulent viscosity at all scales. These models include RSM based URANS procedures as well as LES and DES approaches.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.615-636
• /
• 2014

Aluminium Foam Sandwich (AFS) panels are becoming always more attractive in transportation applications thanks to the excellent combination of mechanical properties, high strength and stiffness, with functional ones, thermo-acoustic isolation and vibration damping. These properties strongly depend on the density of the foam, the morphology of the pores, the type (open or closed cells) and the size of the gas bubbles enclosed in the solid material. In this paper, the vibrational performances of two classes of sandwich panels with an Alulight(R) foam core are studied. Experimental tests, in terms of frequency response function and modal analysis, are performed in order to investigate the effect of different percentage of porosity in the foam, as well as the effect of the random distribution of the gas bubbles. Experimental results are used as a reference for developing numerical models using finite element approach. Firstly, a sensitivity analysis is performed in order to obtain a limit-but-bounded dynamic response, modelling the foam core as a homogeneous one. The experimental-numerical correlation is evaluated in terms of natural frequencies and mode shapes. Afterwards, an update of the previous numerical model is presented, in which the core is not longer modelled as homogeneous. Mass and stiffness are randomly distributed in the core volume, exploring the space of the eigenvectors.

• 지질공학
• /
• 제9권3호
• /
• pp.227-241
• /
• 1999

단열암반 내의 지하수 흐름은 단열의 분포특성과 밀접한 관계를 갖고 있으며, 수리전도도와 직접적인 관계를 갖는 인자로서 단열 틈의 크기와 단열 교차빈도가 고려된다. 본 연구는 여수반도 북부지역의 화산암에 분포하는 단열의 간격과 틈의 크기에 대한 확률밀도함수의 유형과 단열의 분포특성이 수리전도도 값에 미치는 영향 및 상관관계를 분석하였다. 단열의 분포특성은 core logging과 초음파주사 검층을 통하여 조사되었으며, 일정구간별 수리전도도는 이중패커를 이용한 정압/압력강하 시험으로서 산출되었다. 연구지역에 분포하는 단열간격과 단열조별 틈의 크기는 대수정규분포를 나타내지만, 개구성 단열 틈의 크기는 정규분포에 가깝다. Core logging에 의한 투수성 단열, 텔레뷰어 검층에 의한 개구성 단열군, 그리고 Set 1에 속하는 단열들이 교차되는 수리시험 구간에서는 수리전도도 값과 양의 상관관계를 보였다. 단열암반의 수리전도도는 투수성 단열 틈의 크기에 1차적인 영향을 받으며 단열의 교차정도 및 크기에 2차적인 영향을 받는 것으로 해석된다.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제8권6호
• /
• pp.853-861
• /
• 2018

본 논문에서는 전기철도차량이 운행할 때 이상 전압상승에 의한 문제점을 해결할 수 있는 고조파 제한장치의 적용을 제안한다. 운행 중 열차에 전력을 공급하는 교류가선은 25kV/60Hz의 전기를 공급하기 위하여 사용되지만 철도차량 전기장치의 기술발전에 따라 점차 가선에 포함되는 고조파의 크기 및 주파수의 변형이 다양해지고 있다. 최근 열차안전운행에 심각한 문제가 되고 있는 주회로 기기인계기용변압기(Potential Transformer, PT)의 파손이나 주변압기 등의 열손증가는 가선 전원의 고조파로 인한 순간적인 무효전류의 증가로 생기는 현상이다. 주회로 기기의 저주파형 트랜스포머로 고주파수 성분이 유입되면 트랜스 코어의 히스테리시스에 의한 철손 증가 및 기생 커패시턴스에 흐르는 전류가 증가하므로 발열이 발생하게 된다. 이러한 문제 해결을 위해 최근 시퀀스의 조정으로 전력변환 장치의 인위적인 NOTCH OFF가 적용되었다. 그러나, OFF 신호를 받아 제어하는 방식은 지상과 차상 장치의 상호작용으로 동작하므로 불량 발생 시 무효화 되며, 실제 사고가 발생되고 있다. 따라서, 근본적인 문제해결을 위한 방법으로 고조파 전류가 가급적 변압기에 유입되지 않도록 하는 것이 필요하며, 고조파 전류의 유입으로 인해 빈번하게 발생되고 있는 열차사고를 방지하고 안전한 운행을 위해 열차의 실험 분석과 고조파 제한장치의 시뮬레이션을 통한 장치의 타당성 검증을 위한 연구를 수행하였다.

• 전력전자학회논문지
• /
• 제21권4호
• /
• pp.296-301
• /
• 2016

Using high magnetic flux from a 60 Hz high-current cable, a 2 W wireless-powered energy harvesting receiver for sensor operation, internet of things (IoT) devices, and LED lights inside electrical cable tunnels is proposed. The proposed receiver comprises a copper coil with a high number of turns, a ring-shaped ferromagnetic core, a capacitor for compensating for the impedance of the coil in series, and a rectifier with various types of loads, such as sensors, IoT devices, and LEDs. To achieve safe and easy installation around the power cable, the proposed ring-shaped receiver is designed to easily open or close using a clothespin-shaped handle, which is made of highly-insulated plastic. Laminated silicon steel plates are assembled and used as the core because of their mechanical robustness and high saturation flux density characteristic, in which the thickness of each isolated plate is 0.3 mm. The series-connected resonant capacitor, which is appropriate for low-voltage applications, is used together with the proposed receiver coil. The concept of the figure of merit, which is the product weight and cost of both the silicon steel plate and the copper wire, is used for an optimized design; therefore, the weight of the fabricated receiver and the price of raw material is 750 gf and USD $2 each, respectively. The 2.2 W powering capability of the fabricated receiver was experimentally verified with a power cable current of $100A_{rms}$ at 60Hz.

• 한국소음진동공학회논문집
• /
• 제23권4호
• /
• pp.301-307
• /
• 2013

MRU(motor reduction unit) for KTX is a assembled complex structure that is equipped with a lot of parts at the express train KTX and that is the core power source operating variable speeds. This study is recorded the dynamic characteristics analysis results tested by EMA which is done through the parts and assembly test, transient analysis and stoped train test in order to design the online monitoring system for KTX MRU. And the mode shapes result from critical vibration frequency explain the relation with variable speeds of express train over 250 km/hr. Also these variable speeds make variable operational frequencies at pinion, axle gear mesh frequency and normal bearing fault frequencies. As the specified speed can make resonance with natural frequencies of the MRU, for the train operating stability, this study also presents the MRU's critical speeds calculated by the each train speed.

• 천문학회보
• /
• 제41권2호
• /
• pp.41.1-41.1
• /
• 2016

The Galactic center, Sagittarius A* (Sgr A*), is the closest supermassive black hole and emits synchrotron radiation. It provides great opportunity to study the origin of mm/sub-mm emission. Currently, two competing models have been suggested as a jet base and a radiatively inecient accretion flow (RIAF). To unveil the properties, the extremely high resolution(${\sim}10{\mu}as$) corresponding to the projected Schwarzschild radius of ~0.1AU is necessary. With KVN, a jet model can be tested by multi- frequency simultaneous observations because the optically thick surface in a jet (i.e. radio core) moves toward the center at a higher frequency. We conducted 8 observations with KVN at 43/86GHz in 2015, and found that the measured positional shift to the reference calibrator, J1744-3116, was ~0.3 mas to the south of Sgr A* using the source frequency phase referencing (SFPR) at Q/W bands for the first time. With the result, in the future, we will attempt to measure the variation of source position shifts that can constrain the direction of approaching jets and the variability of black hole activity of Sgr A*.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.109-113
• /
• 2006

The Arithmetic Logic Unit (ALU) is a core element of a computer processor that performs arithmetic and logic operations on the operands in computer instruction words. We have developed and tested an RSFQ multi-bit ALU constructed with half adder unit cells. To reduce the complexity of the ALU, We used half adder unit cells. The unit cells were constructed of one half adder and three de switches. The timing problem in the complex circuits has been a very important issue. We have calculated the delay time of all components in the circuit by using Josephson circuit simulation tools of XIC, $WRspice^{TM}$, and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The designed ALU had limited operation functions of OR, AND, XOR, and ADD. It had a pipeline structure. The fabricated 1-bit, 2-bit, and 4-bit ALU circuits were tested at a few kilo-hertz clock frequency as well as a few tens giga-hertz clock frequency, respectively. For high-speed tests, we used an eye-diagram technique. Our 4-bit ALU operated correctly at up to 5 GHz clock frequency.

• 한국직업건강간호학회지
• /
• 제24권4호
• /
• pp.340-351
• /
• 2015

Purpose: This study was conducted to identify the job competencies of HIV counseling nurses and to figure out the importance, level of difficulty, and performance frequency of the competencies. Methods: The job competencies were drawn from 22 HIV counseling nurses by developing new models and utilizing specialist groups. The importance, level of difficulty, and performance frequency of the competencies were analyzed using the average and deviation. Results: The results of this study identified 6 job competencies such as counseling performance, expertise utilization, cooperation, support, administration, and self-development, 28 sub-competencies, and 48 job descriptions. Out of the 6 job competencies, counseling performance recorded high levels in the importance, level of difficulty, and performance frequency. Conclusion: The study results will be used as the basic data of the training programs for strengthening the job competencies of HIV counseling nurses. Furthermore, it is expected that the results will contribute to the prevention of HIV/AIDS transmission, the core of the national HIV/AIDS control programmes, and the improved health and quality of life in people living with HIV.

• 한국전자통신학회논문지
• /
• 제13권4호
• /
• pp.685-694
• /
• 2018

본 논문에서는 Ku대역 추적레이더의 핵심부품인 고주파 헤드 내 주파수 믹서(혼합기)의 설계 및 제작 결과에 대해서 다룬다. 단일종단(Single-Ended) 및 단일평형(Single-Balanced) 믹서의 단점을 보완하기 위해서, Fine-Line 구조의 평형(Balanced) 믹서를 설계하여 낮은 변환손실 특성을 가지도록 하였으며, Ku대역 RF신호를 입력받아 L밴드 IF신호를 생성하도록 하였다. 제작된 믹서에 대해서 Ku밴드 5개 샘플주파수를 대상으로 실험한 결과, 최대 잡음지수(Noise Figure Max) 6.823dB, 이득(Gain) 4.159dB ~ 4.676dB, 통과대역(Band Pass) 61MHz의 값을 확인하였다.