• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.2
• /
• pp.75-79
• /
• 2017

Honeycomb-shaped Ag-grid transparent conductive electrodes (TCEs) were fabricated using two different processes, high density plasma etching and lift-off, and the optical and electrical properties were compared according to the fabrication method. For the fabrication of the Ag-grid TCEs by plasma etching, etch characteristics of the Ag thin film in $10CF_4/5Ar$ inductively coupled plasma (ICP) discharges were studied. The Ag etch rate increased as the power increased at relatively low ICP source power or rf chuck power conditions, and then decreased at higher powers due to either decrease in $Ar^+$ ion energy or $Ar^+$ ion-assisted removal of the reactive F radicals. The Ag-grid TCEs fabricated by the $10CF_4/5Ar$ ICP etching process showed better grid pattern transfer efficiency without any distortion or breakage in the grid pattern and higher optical transmittance values of average 83.3 % (pixel size $30{\mu}m/line$ width $5{\mu}m$) and 71 % (pixel size $26{\mu}m/line$ width $8{\mu}m$) in the visible range of spectrum, respectively. On the other hand, the Ag-grid TCEs fabricated by the lift-off process showed lower sheet resistance values of $2.163{\Omega}/{\square}$ (pixel size $26{\mu}m/line$ width $18{\mu}m$) and $4.932{\Omega}/{\square}$ (pixel size $30{\mu}m/line$ width $5{\mu}m$), respectively.

• Journal of Korean Medicine for Obesity Research
• /
• v.24 no.1
• /
• pp.87-93
• /
• 2024

Objectives: Obesity is a globally prevalent public health issue. Hence, there is a need for the development of safer and more effective anti-obesity drugs. Lythrum salicaria, a traditional medicinal herb used for centuries, has been reported to improve lipid metabolism and fat accumulation. It also has a low toxicity profile. Therefore, its potential as a functional ingredient in health functional foods needs to be evaluated. Methods: In this randomized, double-blind, placebo-controlled clinical trial, 90 participants will be randomly assigned to either the experimental or control group. Each subject will orally receive L. salicaria extract (1,350 mg/day) (500 mg L. salicaria+850 mg lactose as vehicle) or lactose (1,350 mg/day) as a hard capsule formula for 84 days (12 weeks). The primary outcome will be body fat mass (kg), which will be assessed using dual-energy x-ray absorptiometry (DXA) (performed only at visits 2 and 4). Secondary outcomes include body mass index, body weight, waist-to-hip ratio, body fat percentage (%) measured using DXA, lean body mass (kg) measured using DXA (assessed only at visits 2 and 4), lipids (total cholesterol, triglyceride, high-density lipoprotein cholesterol, and calculated low-density lipoprotein cholesterol), free fatty acid, high sensitivity C-reactive protein, adiponectin, and leptin. Conclusions: This protocol will be implemented after approval of Institutional Review Board of Pusan National University Korean Medicine Hospital (approval number: PNUKHIRB-2022-08-002) and registration with the Korean National Clinical Research Information Service (CRIS) (CRIS-KCT0008060). The results of this trial will provide potential of L. salicaria as a new anti-obesity functional food with fat-reducing effects and low toxicity.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.

• Korean Journal of Community Nutrition
• /
• v.22 no.5
• /
• pp.441-455
• /
• 2017

Objectives: The purpose of this study is to describe beverage patterns among healthy Korean adults and investigate their association with prevalence and components of metabolic syndrome. Methods: Subjects consisted of 6,927 Korean adults, aged 19-64 years in the $6^{th}$ Korea National Health and Nutrition Examination Survey (KNHANES, 2013-2015). Beverages were regrouped into twelve groups based on food codes and beverage intake (g/day) was assessed by 24-hour recall. Factor analysis was used to obtain beverage patterns. Waist circumference and body mass index (BMI) were used as anthropometric data; fasting blood glucose, triglyceride, high density lipoprotein (HDL), and blood pressure were used as biochemical indicators. The odds ratio (OR) for prevalence of metabolic syndrome and components of metabolic syndrome was assessed using logistic regression analysis. Results: Three beverage patterns were identified using factor analysis: 1) carbonated soft drinks 2) coffee (without added sugar or powdered creamer), and 3) alcoholic beverages. Subjects with high scores for the carbonated soft drink and coffee without added sugar or powdered creamer patterns were younger and subjects with high scores for the alcoholic beverage pattern were older. There were significant differences in gender distribution in all three beverage patterns, with men more likely to have high scores for carbonated soft drink and alcoholic beverage patterns. On the other hand, women were more likely to have higher scores for coffee without added sugar or powdered creamer pattern. Within each pattern, there were significant differences in sociodemographic and lifestyle characteristics such as education, household income, frequency of eating out, and smoking status according to the quartile of pattern scores. Alcoholic beverages and carbonated soft drinks patterns were associated with an increased levels of metabolic syndrome components, but coffee without added sugar or powdered creamer was not associated with any of metabolic syndrome components in healthy Korean adults after adjusting for age, sex, education, BMI, weight management, household income, smoking status, frequency of eating out, and energy intake. Conclusions: Alcoholic beverages and carbonated soft drinks patterns are associated with increased levels of metabolic syndrome components while coffee without added sugar or powdered creamer pattern is not associated with any of metabolic syndrome components in healthy Korean adults.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.454-462
• /
• 2023

Flash lamp annealing (FLA) of metal nanoparticle (NP) ink has provided powerful strategies to fabricate high-performance electrodes on a flexible substrate because of its rapid processing capability (in milliseconds), low-temperature process, and compatibility with to roll-to-roll process. However, metal NPs [e.g., gold (Au), silver (Ag), copper (Cu), etc.] have limitations such as difficulty in synthesizing fine metal NPs (diameter less than 10 nm), high price, and degradation during ink storage and FLA processing. In this regard, organometallic ink has been proposed as a material that can replace metal NPs due to their low-cost (usually 1/100 times cheaper than metal nano inks), low-temperature processability, and high material stability. Despite these advantages, the fabrication of flexible electrodes through FLA treatment of organometallic compounds has not been extensively researched. In this paper, we experimentally guide how to determine the optimal conditions for forming electrodes on flexible substrates by considering material parameters, and flashlight processing parameters (energy density, pulse duration, etc) to minimize the difficulties that may arise during the FLA of organometallic ink.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.667-675
• /
• 2018

Increasing emissions regulations and demand of high-efficiency cars that travels a lot of distance with less fuel, there is growing interest in Energy Consumption Efficiency. Korean energy consumption efficiency compute combined Fuel Economy by driven city & highway driving mode and present final Energy Consumption Efficiency as using 5-cycle correction formula. Energy consumption efficiency is computed Carbon-balance-method, when used burning fuel play a key role in vehicle performance & Energy Consumption Efficiency. In Korea, vehicle fuel is circulate by Petroleum and Petroleum Alternative Business Act, there is property difference in quality standard because petroleum sector's refine method or type of crude oil. It does not appear a big difference according to fuel, because it sets steady quality standard, it may affect the performance of automobile. Thus, in research We purchase a few diesel fuel which circulated in the market in summer season though directly-managed-gas station by petroleum sector, resolve property each of fuel, we compute Fuel Economy each of them. We analyze into change depend on applying for property as nowadays utilizing Energy Consumption Efficiency calculating formula of gasoline and diesel fuel. As result, Density each of sample fuel has a maximum difference roughly 0.9%, net heat value each of sample fuel has difference 1.6%, result of current Energy Consumption Efficiency each of sample fuel has a difference roughly 1% at city drive mode, 1.4% at highway drive mode. Result of use gasoline calculator formula shows less 6% result than nowadays utilizing Energy Consumption Efficiency calculating formula, each of sample's Energy Consumption Efficiency shows maximum roughly 1.4% result in city & highway drive mode.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.302-306
• /
• 2009

9 kinds of nanoparticle used for this study was a particle with the size of less than 100 nm of diameter, and Artemia sp. cyst examined what kind of influence to have upon the process hatched out in nauplius. 82% hatched in nauplius at the opposition ward where a nanoparticle wasn't added after 24 time course. AGZ020, Nano silver, P-25, Sb and SnO nanoparticle showed hatching rate of 18%, 20%, 13%, 50% and 0% respectively by the 20mg/L density, and it became clear that a harmful effect is big, but I had a harmful effect compared with the opposition ward by 75%, 60%, 73% and 73% respectively by Ag-$TiO_2$, In, Sn and Zn nanoparticle, but a feeble thing was known relatively compared with AGZ020, Nano silver, P-25, Sb and SnO nanoparticle. The difference has caused this with the ingredient a nanoparticle has. Ag is included 2 % and AGZ020, Nano silver and P-25 nanoparticle are used widely as anti-fungus agent, and the SnO nanoparticle which became combination is a light catalyst pill, and oxygen is used for a Sn particle. This and others, a possibility that use is generalized and flows into aquatic environment in sequence the home electronics, functionality cosmetics, anti-fungus agent and a light catalyst pill at present becomes high for nanoparticles and others. The anxiety which has an influence on the ecology world in the water with this can be generated, so I'd have to study the potential danger a nanoparticle has continuously.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.43-48
• /
• 2024

The discovery of a two-dimensional electron gas (2DEG) at the interface of LaAlO₃ (LAO) and SrTiO₃ (STO) substrates has sparked significant interest, providing a foundation for cutting-edge research in electronic devices based on complex oxide heterostructures. However, conventional methods for producing LAO thin films, typically employing techniques like pulsed laser deposition (PLD) within physical vapor deposition (PVD), are associated with high costs and challenges in precisely controlling the La and Al composition within LAO. In this study, we adopted a cost-effective alternative approach-solution-based processing-to fabricate LAO thin films and investigated their electrical properties. By adjusting the concentration of the precursor solution, we varied the thickness of LAO films from 2 to 65 nm and determined the sheet resistance and carrier density for each thickness. After vacuum annealing, the sheet resistance of the conductive channel ranged from 0.015 to 0.020 Ω·s^-1, indicating that electron conduction occurs not only at the LAO/STO interface but also into the STO bulk region, consistent with previous studies. These findings demonstrate the successful formation and control of 2DEG through solution-based processing, offering the potential to reduce process costs and broaden the scope of applications in electronic device manufacturing.

• Electronic Materials Letters
• /
• v.14 no.6
• /
• pp.689-699
• /
• 2018

Nanostructured Ni doped $Bi_2S_3$ ($Bi_{2-x}Ni_xS_3$, $0{\leq}x{\leq}0.07$) is explored as a candidate for telluride free thermoelectric material, through a combination process of mechanical alloying with subsequent consolidation by cold pressing followed with a sintering process. The cold pressing method was found to impact the thermoelectric properties in two ways: (1) introduction of the dopant atom in the interstitial sites of the crystal lattice which results in an increase in carrier concentration, and (2) introduction of a porous structure which reduces the thermal conductivity. The electrical resistivity of $Bi_2S_3$ was decreased by adding Ni atoms, which shows a minimum value of $2.35{\times}10^{-3}{\Omega}m$ at $300^{\circ}C$ for $Bi_{1.99}Ni_{0.01}S_3$ sample. The presence of porous structures gives a significant effect on reduction of thermal conductivity, by a reduction of ~ 59.6% compared to a high density $Bi_2S_3$. The thermal conductivity of $Bi_{2-x}Ni_xS_3$ ranges from 0.31 to 0.52 W/m K in the temperature range of $27^{\circ}C$ (RT) to $300^{\circ}C$ with the lowest ${\kappa}$ values of $Bi_2S_3$ compared to the previous works. A maximum ZT value of 0.13 at $300^{\circ}C$ was achieved for $Bi_{1.99}Ni_{0.01}S_3$ sample, which is about 2.6 times higher than (0.05) of $Bi_2S_3$ sample. This work show an optimization pathway to improve thermoelectric performance of $Bi_2S_3$ through Ni doping and introduction of porosity.

• Journal of Life Science
• /
• v.33 no.12
• /
• pp.967-977
• /
• 2023

Rubus crataegifolius (RC) is a traditional Asian medicinal plant belonging to the Rosaceae family. The fruits of RC are known to prevent adult diseases through antioxidants. In this study, the effects of RC extract (RCex) on obesity and nonalcoholic fatty liver disease (NAFLD) were evaluated in animal models. Twenty-eight male C57BL/6J mice were induced to become obese for 8 weeks and then the extract was orally administered for 8 weeks. RCex reduced body weight, adipose tissue, liver weight. RCex improved biochemical biomarkers including lipid metabolism (alanine aminotransferase (ALT), aspartate aminotransferase (AST), plasma triglyceride (TG), total cholesterol (TC), high-density lipoprotein (HDL) cholesterol and low-density lipoprotein (LDL) cholesterol). The activation of AMP-activated protein kinase (AMPK) reduced the expression of adipogenesis genes (liver × receptor (LXR), sterol regulatory element-binding protein-1c (SREBP-1c), fatty acid synthesis (FAS), acetyl-CoA carboxylase 1 (ACC1) and the effect of enhancing carnitine palmitoyltransferase (CPT) activity by RCex was verified. RCex also influence on plasma production of hormones (adiponectin & leptin) related on energy expenditure and metabolism. In addition, we confirmed that RCex improved glucose intolerance in HFD-induced obese rats. RCex was first demonstrated to have anti-obesity as well as anti-NAFLD effects by regulating fatty acid oxidation and fatty acid synthesis by phosphorylation of AMPK. This suggests that RCex could be a good supplement for the prevention of obesity and related NAFLD.