• Journal of Korean Physical Therapy Science
• /
• v.18 no.4
• /
• pp.73-79
• /
• 2011

Purpose : This study is to know how position change in high-heels affects sacral tilt angle. 15 healthy women aged 21.87(standard deviation=3.54) were tested. Method : Lumbar and sacral tilt angle was measured by radiography barefooted, and after 15 mins of application time, they were measured in the same way in high-heels. Result : There was not notable difference in lumbar lordosis, lumbosacral angle, and sacral tilt angle. However, there was differences in change degree, which was measured by estimation data of [post-pre)/pre]${\times}$100. Conclusion : There was no notable difference in lumbar lordosis, lumbosacral angle, and sacral tilt angle, but as there were differences in change degree, research about how women's lumbar change when heel height increases is needed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.575-582
• /
• 2007

In this paper, a 100 Watt high power amplifier has been implemented and performed evaluation, which is operating at UHF band ($470\;{\sim}\;806\;MHz$) for Digital TV repeater. To achieve increase of bandwidth and high power capability, 3-way power combiner and divider of Wilkinson type was adopted. In order to measure the fabricated 100 Watt power amplifier, the estimation technique function which makes equivalent mask was used. As a result of the measurement, the existence of pilot signal is confirmed and the signal transmitted at the rated output power 100 Watt is brought out the flat feature through 6 MHz bandwidth. and it resulted that its value was less than -47 dB at the edge of radiation channel and less than -110 dB at more than 6 MHz position from channel edge.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.469-476
• /
• 2009

Hard facing overlay welding in high chromium carbide is a representative way of extending the fatigue life or recompensing damage, because workpiece surface is uniformly overlay-welded by alloy material. In general, grinding process is currently used for finish due to hardness of weld material. The development of tool material, such as PCBN, has made it possible to use turning instead of grinding. There are many advantages of hard Owning, as lower equipment costs, shorter setup time, fewer process steps, higher material removal rate, better surface integrity and the elimination of cutting fluid. In this paper, machining characteristics and cutting performance are examined to investigate turning possibility of overly welding in high chromium carbide.

• Journal of the Korean Home Economics Association
• /
• v.37 no.5
• /
• pp.31-48
• /
• 1999

This research was to assess the high school girls' need about the computer assisted instruction(CAI) in the Home Economics Curriculum. In One-way ANOVA, the high school girls' need about the CAI differs in the educational level of the father and the mother, the preference for the Home Economics, the involvement with the Home Economics and the preference for a teaching method of Home Economics. MCA was done to assess the independent explanatory power of predictory variables. The educational level of father and mother were included separately in different model. The MCA that the educational level of father was included in, The most influential variable was the preference for the Home Economics and the involvement with Home Economics was the second. The MCA that the educational level of mother was included in, The most influential variable was the preference for the Home Economics and the educational level of mother was the second.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.2
• /
• pp.93-99
• /
• 1989

This paper describes Sinusoidal Wave-Variable Voltage Variable Fequency (SW-VVVF) system for the high efficiency drive of a 3-phase induction motor. SW-VVVF system consists of a 3-phase 24-pulse converter and a SPWM inverter. The converter with additional 2 tap diode circuits in interphase reactor reduces harmonics in input current. The SPWM inverter consists of an improved PLL system and a V/F controller, which reduces harmonics in output current and performs a high efficiency algorithm by maintaining a constant slip frequency and compensating for the velocity variation of the induction motor with the change of load. Therefore, this system reduces harmonics in input and output currents, and also can drive an induction motor with high efficiency in an economical way. We have proved its utility through experiment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.80-83
• /
• 2008

Because of its advantages of simple structure, fast response speed, strong anti-pollution ability and good stability, high-speed solenoid valve has been widely used in aeroengine control systems, and some performances of the aeroengine control systems were affected directly by the response speed of high-speed solenoid valve. For some two-position two-way highspeed solenoid cone-valve, the paper discusses the establishment of its mathematical model and analyses its response characteristics by simulation model which is run in simulink of Matlab. Further more, a backstepping and segmentation method is used in the research of response characteristics, and the method is proved to be an accurate, fast and new method to get the influences of parameters on the valve s response characteristics.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1441-1447
• /
• 2008

This research studies the effects of community noise around railway, noise from the inside/outside noise of the High-Speed EMU. First study part of this year is research of the noise source. The modeling methodology for prediction of noise level including the frequency property, velocity dependence, sound pressure of noise source is investigate. Second part is research on the sound transmission loss. An exclusive program which could analyze the sound transmission loss of the floor, the sides(mirror), insulator in High-Speed EMU has to be developed. Third part is research on the train inside/outside and Prediction for community Noise. In order to predict the noise when the High-Speed EMU is traveling at the outside and along tunnels, the result of the research can be derived by evaluating the effect of the noise on the upper/middle parts of the carriage and on the railroad way round about with using the program.

• Journal of Broadcast Engineering
• /
• v.25 no.7
• /
• pp.1073-1080
• /
• 2020

360-degree video streaming technologies have been widely developed to provide immersive virtual reality (VR) experiences. However, high computational power and bandwidth are required to transmit and render high-quality 360-degree video through a head-mounted display (HMD). One way to overcome this problem is by transmitting high-quality viewport areas. This paper therefore proposes a motion-constrained tile set (MCTS)-based tile extractor for versatile video coding (VVC). The proposed extractor extracts high-quality viewport tiles, which are simulcasted with low-quality whole video to respond to unexpected movements by the user. The experimental results demonstrate a savings of 24.81% in the bjøntegaard delta rate (BD-rate) saving for the luma peak signal-to-noise ratio (PSNR) compared to the rate obtained using a VVC anchor without tiled streaming.

• Steel and Composite Structures
• /
• v.48 no.5
• /
• pp.499-505
• /
• 2023

Geological hazards in landslide is one of the most extensive and destructive phenomena are among natural disasters. According to the topography high mountains, tectonic activity, high seismicity, diverse conditions Geology and climate, basically China to create a wide spectrum of landslides have natural conditions and these landslides are annual. They cause a lot of financial losses to the country. It is very difficult to predict the time of the landslide, hence the identification landslide sensitive areas and zoning of these areas based on the potential risk is very important. Therefore, it should be susceptible areas landslides should be identified in order to reduce damages caused by landslides find. the main purpose of landslide sensitivity analysis is identification high-risk areas and as a result, reducing damages caused by landslides It is the way of appropriate actions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.385-392
• /
• 2008

Modern city have had a lot of high-rise building in high standards and multi-level performance. Using of city space reach better stages by using integration. These skyscraper have increased working load on ground. that building is efficiently designed for that soil capacity is well applied. With material side, big size pile, high strength concrete and high strength steel is used for that getting enough lobby space and resisting load increased of high-rise building. limit load test and load transmitted test can make soil capacity optimized. By the way, method of measuring pile capacity is more advanced and bigger. pile type applied by high rise building have underground excavation space, also reflect regional soil property and have some fact reviewed. A lot of high rise building recently is built as land mark in Seoul, Busan and Incheon. about method of measuring capacity of foundation pile, example of construction field is compared and reviewed.