• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.237-241
• /
• 2001

Our goal is to present a simple volume-of-fluid type interface-tracking algorithm to compressible two-phase flow in two space dimensions. The algorithm uses a uniform underlying Cartesian grid with some cells cut by the tracked interfaces into two subcells. A volume-moving procedure that consists of two basic steps: (1) the update of volume fractions in each grid cell at the end of the time step, and (2) the reconstruction of interfaces from discrete set of volume fractions, is employed to follow the dynamical behavior of the interface motion. As in the previous work with a surface-tracking procedure for general front tracking (LeVeque & Shyue 1995, 1996), a high resolution finite volume method is then applied on the resulting slightly nonuniform grid to update all the cell values, while the stability of the method is maintained by using a large time step wave propagation approach even in the presence of small cells and the use of a time step with respect to the uniform grid cells. A sample preliminary numerical result for an underwater explosion problem is shown to demonstrate the feasibility of the algorithm for practical problems.

• Journal of the Korea Computer Graphics Society
• /
• v.11 no.1
• /
• pp.40-49
• /
• 2005

Several optimization techniques have been proposed for volume ray casting, but these cannot achieve real-time frame rates. In addition, it is difficult to apply them to some applications that require perspective projection. Recently, hardware-based methods using 3D texture mapping are being used for real-time volume rendering. Although rendering speed approaches real time, the larger volumes require more swapping of volume bricks for the limited texture memory. Also, image quality deteriorates compared with that of conventional volume ray casting. In this paper, we propose a data structure for real-time volume ray casting named PERM (Precomputed dEnsity and gRadient Map). The PERM stores interpolated density and gradient vector for quantized cells. Since the information requiring time-consuming computations is stored in the PERM, our method can ensure interactive frame rates on a consumer PC platform. Our method normally produces high-quality images because it is based on conventional volume ray casting.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.141-147
• /
• 2017

Recently, lots of researches on concrete with high volume mineral admixtures such as ground granulated blast-furnace slag(GGBS) have been carried out to reduce greenhouse gas. The high volume GGBS concrete has advantages such as low heat, high durability, but it has a limitation in practical field application, especially low strength development in early ages. This study investigated the compressive strength and hydration characteristics of high performanc and volume GGBS cement pastes with low water to binder ratio. The effects of fineness($4,330cm^2/g$, $5,320cm^2/g$, $6,450cm^2/g$, $7650cm^2/g$) and replacement(35%, 50%, 65%, 80%) of GGBS on the compressive strength, setting and heat of hydration were analyzed. Experimental results show that the combination of high volume slag cement paste with low water to binder ratio and high fineness GGBS powder can improve the compressive strength at early ages.

• KCI Concrete Journal
• /
• v.14 no.3
• /
• pp.121-129
• /
• 2002

This study investigates experimentally into the design factors and quality variations having an effect on the properties of the combined high flowing concrete to be poured in the slurry wall of Inchon LNG in-ground receiving terminal. Especially, high belite cement and lime stone powder as cementitious materials and viscosity agent in order to improve self-compaction and hydration heat are used in this study. Water-cement ratio(W/C), fine aggregate volume ratio(Sr) and coarse aggregate volume ratio(Gv) as design factors of the combined high flowing concrete are applied to determine the optimum mix design proportion. Also quality variations for sensitivity test are selected items as followings. (1)Surface moisture(5cases) and (2)Fineness modulus of fine aggregate(5cases), (3)Concrete temperature(3cases), (4)Specific surface(3cases) and particle size of lime stone powder. As experimental results, water-cement ratio, fine and coarse aggregate volume ratio are shown as the optimum range 51%, 43% and 53% separately considering site condition of slurry wall. Also quality factors by sensitivity test should be controlled in the following ranges. (1) Surface moisture :to.67% and (2)Fineness modulus 2.6$\pm$0.2 of fine aggregate, (3)Concrete temperature l0-20t, (4) Specific surface 6,000$\textrm{cm}^2$/g and particle size 9.7$\pm$1.0${\mu}{\textrm}{m}$ of lime stone powder. Based on the results of this study, the optimum mix design proportion of the combined high flowing concrete are selected and poured successfully in the slurry wall of LNG in-ground tank.

• The Korean Journal of Physiology
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1969

Relationships between red ceil volume $(^{51}Cr-cell)$, total blood volume (red cell volume divided by hematocrit ratio), and extracellular fluid volume (SCN distribution space) and body weight (ranging between 73 and 384 grams) or lean body mass were studied in 59 nembutalized rats. Lean body mass was determined by means of underwater weighing method on rats clipped and eviscerated. There were positive correlations between body weight or lean body mass and the absolute values (in milliliters) of body fluid volumes. Body fluid volumes expressed on the body weight or lean body mass basis, however, showed negative correlations between body weight (grams) or lean body weight (grams) with one exception. Red cell volume expressed as % lean body mass showed a positive correlation with lean body mass. The other results are summarized as follows: 1. Body density of rats was 1.0561 $(range:\;1.0123{\sim}1.0781)$ and 19.8% body weight of total body fat was obtained. The mean value of lean body mass was 80.2% body weight 2. The correlation between body weight and lean body mass was high, namely, coefficient of correlation was r=.99. 3. The correlation between the absolute value of red cell volume (ml) and body weight showed a high correlation, namely, r= 92 and between the lean body mass coefficient of correlation was r=.93. On a weight basis, red cell volume was 2.67 ml/100 gm body weight or 3.48 ml/100 gm lean body mass. The coefficient of correlation between body weight (grams) and red cell volume (% body weight) was r=-. 30. The coefficient of correlation between lean body mass (grams) and red cell volume (% lean body mass) was r=. 50. Thus, the following regression equation was obtained. Red cell volume (% lean body mass)=. 00243 Lean body mass (gm)+3. 12. 4. Total blood volume was 6.06% body weight or 7.83% lean body mass. The correlation between these blood volume values and body weight or lean body mass were negative, namely, r= -.43 and r=-.42 respectively. 5. Extracellular volume (SCN space) was 30.0% body weight or 37.2% lean body mass. These percentage values showed negative correlations between body weight or lean body mass and coefficients of correlation were r=-.40 and r=-.54 respectively. 6. The rate of increase in body weight or lean body mass is accompanied by a smaller rate of increase in blood volume and extracellular fluid volume. The rate of increase in red ceil volume paralled that of lean body mass.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.1-1
• /
• 2000

The infinite layer compound $ACuO_2$, (A-Alkaline earth) consists of infinite stacking of $CuO_2$ planes separated only by alkaline earth ions. This compound attracted much attention because it contains only key ingredient of all cuprate high temperature superconductor; $CuO_2$ plane with controllable carrier concentration without charge reservoir block. High pressure synthesis method has been found to be preferable for this system due to its ability of doping various lanthanide ion into A site with larger superconducting volume fraction. But rigorous study on this rudimentary compound has been hindered by insufficient quality of sample. Especially superconductlng volume fraction was often too small to identify its origin. In this presentation, we report high pressure synthesis of $Sr_{0.9}Ln_{0.1}CuO_2$ (Ln=La, Sm). By controlling the heating temperature precisely during high pressure synthesis we could have superconductors with quite high superconducting volume fraction for this compound. The magnetic properties of the graln aligned samples show very different behavior compared to the cuprate high temperature superconductors. Details will be discussed.

• Journal of Korean Association for Spatial Structures
• /
• v.23 no.2
• /
• pp.69-78
• /
• 2023

This paper investigates the effects of aspect ratio and volume fraction of hooked-end normal-strength steel fibers on the compressive and flexural properties of high-strength concrete with specified compressive strength of 60 MPa. Three types of hooked-end steel fibers with aspect ratios of 64, 67 and 80 were considered and three volume fractions of 0.25%, 0.50% and 0.75% for each steel fiber were respectively added into each high-strength concrete mixture. The test results indicated that the addition of normal-strength steel fibers is effective to improve compressive and flexural properties of high-strength concrete but fiber aspect ratio had little effect on the modulus of elasticity and compressive strength. As steel fiber content and aspect ratio increased, flexural beahvior of notched high-strength concrete beams was effectively improved.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.134-135
• /
• 2015

This study analysed compressive strength and the expansion characteristic to utilize a high volume mineral admixture mortar for a aerated mortar and a plastering mortar. In this experiment, the result shows that the compressive strength gain was satisfactory in case that WR was replaced within 5%. Also, the difference between WR1 and WR was insignificant. It shows that the drying shringkage properties at large was showed being satisfactory generally compared with Plain when WR was replaced, but the effect was not significant.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.10-17
• /
• 2000

This work presents an investigation of aerodynamic characteristics of fuel spray injected from a high pressure hollow cone swirl injector into a constant volume chamber. Laser tomography visualization was used to interrogate the fuel and air mixing characteristics and the effect of chamber pressure and temperature increase was analyzed, Preliminary results on spray development showed that mixing effect tends to increase with the increase of injection pressure and chamber gas pressure yielding a decrease of spray penetration and an attenuation of well-defined vortex structure. Topological analysis of the spray structure has been performed to initiate the understanding of mixing and vaporization process. For the present experimental conditions fuel injection pressure and chamber gas pressure appear as the dominant factors which govern the transient mixing characteristics. Moreover spray atmixation characteristics are improved by increasing chamber gas temperature.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.681-686
• /
• 2002

In this study, a high volume fly-ash substituted concrete experiments in two curing temperature circumstances - 35${\circ}$, 20.${\circ}$, High volume fly-ash concrete is tested in fresh concrete properties and hardeded concrete properties. There is slump, air contents, concrete setting tests. 3, 7, As fresh concrete test items and 28 days water curing compressive strength is measured in the hardened concrete test. The purpose of this study is to submit a various fly-ash concrete data for application to field. The result of this study is that the best strength is developed at the plain concrete cured 20 ${\circ}$, and Mixing F43 shows the best strength among specimens which cured at 35${\circ}$,