• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.230-237
• /
• 2024

Dispersion munitions are often equipped with dispersive submunitions used to scatter bombs over a wide area, and one of the types of dispersive submunitions is the Magnus rotor, commonly referred to as a self-rotating flying body. The Magnus rotor is designed to be dispered over a wide area by utilizing the principle of the Magnus effect through self-rotation, and has various trajectories depending on the initial conditions from the mother dispersion munition. In this paper, an index to evaluate the dispersion uniformity of footprint of the dispersive submunition is presented and the dispersion uniformity according to various initial release conditions is evaluated, and it is getting larger with high incidence angle and get max value at certain initial angular velocity.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.586-588
• /
• 2005

The MSC (Multi Spectral Camera) system is a remote sensing payload to obtain high resolution ground image. This system uses lossy image compression method for &Direct mission& that transmit whole image during one contact. But some image degradation occurred especially at high compression ratio. To reduce this degradation, the MSC uses NUC (Non-uniformity Correction) Unit. This unit correct CCD (Charge Coupled Device)'s high-frequency non-uniformity. So high frequency contents of image can be minimized and whole system SNR can be maximized. But NUC has some disadvantage either. It decreases entire system reliability by adding one electronic system. Adding NUC also led to difficulty of electronic design, assembly and testability. In this paper, the comparison is performed between on-orbit non-uniform correction and on ground correction. by evaluating NUC advantage for the point of view of image quality. Using real MSC parameter and proper model, considerable reference point for the system design came to possible.

• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.92-98
• /
• 2003

한양대학교 중형 아음속 풍동의 설계요구사항에 따라 균일도 증가 및 난류도 감소를 위한 최적설계를 수행하였다. 신뢰성 있는 풍동실험을 위해 먼저 풍동 시험부의 균일도와 난류강도 특성이 먼저 파악되어야 한다. 한양대학교 중형 아음속 풍동의 비균일도와 난류강도는 세 부분의 속도영역에서 피토관과 X형 열선프로브로 각각 측정되었다. 풍동 시험부의 유속이 증가함에 따라 비균일도가 작아졌으나 시험부의 측정단면이 확산부에 가까워질수록 비균일도가 크게 나타났다. 난류강도는 시험부 중앙에서 설계 요구조건에 비해 약간 높게 측정되었다.

• 한국표면공학회지
• /
• 제18권3호
• /
• pp.105-115
• /
• 1985

Lead-tin-copper ternary alloy electrodeposition is conducted onto the inner bore surface of plain bearings as an overlay in order to investigate the effect of slot width, current density and fluoboric acid concentration on the uniformity of overlay. The thickness of overlay is analyzed by means of current distribution resulting from the overvoltage of plating bath and the apparent distance between cathode and anode. The result demonstrate that the uniformity of overlay is remarkably dependent of the slot size and current density, but has little bearing on the fluoboric acid concentration over 100g/L. This present study indicates that uniform overlay is obtainable within the tolerable thickness of ${\pm}2{\mu}m$ by using the slot width of 22mm. The surface morphology examination also shows the important role of concentration polarization of the micro-uniformity of overlay. The micro-uniformity has improved at the low concentration polarization which resulted from operating at the low current density and high fluoboric acid concentration. The surface morphology of deposits exhibits the vivid pyramid crystalline in the plating condition of low concentration polarizatio and all deposits have columnar structure parallel to the applied electric field regardless of the electroplating condition used.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.86-93
• /
• 2022

An electrostatic precipitator (ESP) is an industrial post processing facility for high efficiency dust mitigation. Uniformity of the flow passing through the inlet duct leading into the main chamber is important for efficient reduction of dust. To examine flow uniformity, this study conducted a numerical analysis of the flow within a scale-down ESP inlet duct. Magnetic resonance velocimetry (MRV) results from a prior study were utilized to validate the Reynolds-averaged Navier-Stokes (RANS) numerical simulations. Both the experimental and computational results displayed a similar recirculation zone shape and normalized velocity profile near the duct outlet for the baseline geometry. To optimize the uniformity of the flow, the number of guide vanes was modified, and the guide vanes were partially extended straight upward. Design evaluation is done based on the outlet velocity distribution and mass flowrate balance between the two outlets. Simulation results indicate that the vane extension is critical for flow optimization in curved ESP ducts.

• 한국광학회지
• /
• 제34권5호
• /
• pp.202-209
• /
• 2023

절대복사온도계의 분광 복사 휘도 감응도를 교정하기 위해 압축된 polytetrafluoroethylene (PTFE)과 반사봉을 사용하여 높은 공간 복사 휘도 분포를 가진 KRISS형 소형 적분구를 제작하였다. 이 적분구의 공간 복사 휘도 균일도는 ±0.009%로 지금까지 국외 표준기관들이 보고한 최고값보다 5배 높았다. 또한, 상용 제품인 소결된 PTFE 적분구의 공간 복사 휘도 균일도를 10배 향상시켰다.

• 전자공학회논문지SC
• /
• 제44권3호
• /
• pp.29-33
• /
• 2007

균일한 빛 에너지에 대하여 영상센서의 모든 픽셀은 이상적으로는 균일하게 반응해야하지만 실제적으로는 그렇지 않다. 이러한 영상센서의 불균일 특성은 픽셀자체의 특성과 광학모듈 특성 등에 의하여 발생한다. 영상센서의 불균일 특성은 고정된 형태의 잡음으로 다양한 보정 알고리즘에 의해 보정될 수 있으며 보정능력에 따라 더욱 우수한 영상 품질을 기대할 수 있다. 보통, 영상센서의 불균일 보정은 적절한 알고리즘에 의해 보정계수를 구한 후 이를 적용하여 이루어진다. 본 논문에서는 모든 광량영역에서 좀 더 정확하고 신뢰성 있는 최적의 픽셀 불균일 보정계수 계산 알고리즘을 제안한다. 제안한 알고리즘은 불균일 특성을 향상시키기 위해 센서를 1차원으로 모델링하였으며 보정계수를 구하기 위해 여러 광량레벨에서 측정데이터를 얻고 최적의 해를 얻기 위해 최소자승법을 이용한다. 논문에서는 보정계수 획득을 위해 적분구, 프래임그래버를 탑재한 컴퓨터 및 제안한 알고리즘을 구현한 소프트웨어를 사용하였다. 또한 자체 구현한 카메라와 별도의 시험셋업을 이용하여 불균일 시험을 수행하여 제안한 알고리즘을 검증하였다. 제안한 알고리즘을 보정 전 결과 및 기존 방법의 결과와 비교하였으며, 비교 결과, 제안한 알고리즘이 모든 광량에서 가장 좋고 신뢰성 있는 결과를 보여주었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.784-791
• /
• 2000

To improve the uniformity of slurry spreading and to reduce the odor problem, a hose slurry spreader was developed, which spread the slurry near to the surface of the soil. First, the uniformity of slurry spreading was investigated. The best result of 8.1 ％ CV was obtained at the rotor speed of 250 rpm than any other speeds for the swine slurry, which contains 13.6% of dry matter. In case of dairy cattle slurry, which contains 8.2% of dry matter, the uniformity has the best result of CV 7.2% by high rotor speed of 330 rpm. A high speed of rotor has built a sufficient pressure in the distributor and discharged a uniform quantity of slurry through the hoses. Therefore, in practical use one should work with rotor speed over 300 rpm to maximize the uniformity of slurry spreading. Second, odor test was done with the swine slurry. While the conventional spreader shows ∑ value 440, the hose slurry spreader and its combination of disk harrow show ∑ value 258 and 184 respectively. With the air dilution sensual test and a 3-point odor bag, the conventional spreader shows 66.9 or 35.4 point and by the hose slurry spreader is 9.7 or 11.1 point. So, the developed spreader was found to have a greater effect on the reduction of odor problem. Finally, it is recommended to spread certain amount of the slurry for paddy field equivalent to the chemical fertilizer based on the N-content. It means 22 tons of swine slurry per ha. Since most of the livestock farms possess less arable land, a system of linking farms is necessary to utilize the slurry crossover the farms. The cost of slurry utilization including filling, transport spreading and brokerage is 3200-6800 Won/㎥ in accordance with the transport distance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.176-177
• /
• 2016

In the last few decades, attention toward atmospheric pressure plasma (APP) has been greatly increased due to the numerous advantages of those applications, such as non-necessity of high vacuum facility, easy setup and operation, and low temperature operation. The practical applications of APP can be found in a wide spectrum of fields from the functionalization of material surfaces to sterilization of medical devices. In the secondary battery industry, separator film has been typically treated by APP to enhance adhesion strength between adjacent films. In this process, the plasma is required to have high stability and uniformity for better performance of the battery. Dielectric barrier discharge (DBD) was usually adopted to limit overcurrent in the plasma, and we developed the pre-discharge technology to overcome the drawbacks of streamer discharge in the conventional DBD source which makes it possible to produce a super-stable plasma at atmospheric pressure. Simulations for the fluid flow and electric field were parametrically performed to find the optimized design for the linear jet plasma source. The developed plasma source (Plasmapp LJPS-200) exhibits spatial non-uniformity of less than 3%, and the adhesion strength between the separator and electrode films was observed to increase 17% by the plasma treatment.

• 조명전기설비학회논문지
• /
• 제15권2호
• /
• pp.1-6
• /
• 2001

우리 나라의 터널 조명은 운전자의 시야상태를 저해하는 불균일한 조도 균제도, 터널 내의 플리커 현상, 심한 눈부심 등과 함께 낮은 기구효율, 낮은 조명률, 높은 에너지 소비 등의 문제점을 갖고 있다. 이러한 것들을 개선 하기 위해서 터널용 고효율 조명기구의 반사판을 개발하였고, 개발된 조명기구는 기구 자체 효율이 10%이상 상승함으로써 에너지의 절감과 조명효과의 상승을 가져왔으며, 기구 대수의 저감으로 시설비를 절감할 수 있다. 또한 이것을 이용한 터널조명에서는 평균조도 200[lx]이상, 전반 균제도 0.4이상, 차선축 균제도 0.7이상, 단위 면적당 소비전력 3.7 [W/m$^2$]이하의 효과를 얻었다.