• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.237-250
• /
• 2015

This paper describes a hardware-oriented algorithm and its conceptual implementation in a real-time speed limit traffic sign detection system on an automotive-oriented field-programmable gate array (FPGA). It solves the training and color dependence problems found in other research, which saw reduced recognition accuracy under unlearned conditions when color has changed. The algorithm is applicable to various platforms, such as color or grayscale cameras, high-resolution (4K) or low-resolution (VGA) cameras, and high-end or low-end FPGAs. It is also robust under various conditions, such as daytime, night time, and on rainy nights, and is adaptable to various countries' speed limit traffic sign systems. The speed limit traffic sign candidates on each grayscale video frame are detected through two simple computational stages using global luminosity and local pixel direction. Pipeline implementation using results-sharing on overlap, application of a RAM-based shift register, and optimization of scan window sizes results in a small but high-performance implementation. The proposed system matches the processing speed requirement for a 60 fps system. The speed limit traffic sign recognition system achieves better than 98% accuracy in detection and recognition, even under difficult conditions such as rainy nights, and is implementable on the low-end, low-cost Xilinx Zynq automotive Z7020 FPGA.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2006

This paper describes the design and implementation of video conference system using hybrid type P2P(Peer to Peer). The proposed video conference system has hybrid type P2P architecture based on a client-server and P2P(Peer to Peer), where client-server is used for exchange of account management, client list and status information and P2P is used for the real time video conference. The proposed video conference system decreases the traffic of server, and cuts down the load of a network. Because the multimedia data is decentralized to client by P2P. Also, this system is tested by the multi-party video conference system using communication protocol and application software through high speed networks.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2016

This paper was studied in two ways with respect to the information received from the video signal separation technique of PPI Scop radar device. The proposed technique consists in generating an image signal through the video signal separation and synthesis, symbol generation, the residual image signal generation process. This technology can greatly improve the operating convenience with improved ease of discrimination, screen readability for the operator in analyzing radar information. The first proposed method was constructed for high-speed FPGA-based information processing systems for high speed operation stability of the system. The second proposed method was implemented intelligent algorithms and a software algorithm function curve associated resources.This was required to meet the constraints on the radar information, analysis system. Existing radar systems have not the frame data analysis unit image. However, this study was designed to image data stored in the frame-by-frame analysis of radar images with express information MPEG4 video. Key research content is to highlight the key observations expresses the target, the object-specific monitoring information to the positive image processing algorithm and the function curve delays. For high-definition video, high-speed to implement data analysis and expressing a variety of information was applied to the ARM Processor Support in Pro ASIC3.

• Membrane Journal
• /
• v.13 no.3
• /
• pp.174-181
• /
• 2003

In this study the formation of the particle layer near the membrane surface was observed for the crossflow micro filtration module by the high speed video system. The microfiltration membrane of 0.2 {\mu}m$ nominal pore size and the 0.05 wt% solution of the polyacryl-copolymer particle distributed between 100 and 180 {\mu}m$ were used for the experiment. The feed rates were changed to 0.5, 0.75, 1.0, 1.25 and 1.5 cm/sec while the permeate rates were maintained at $20{\pm}3%$ of the feed rates, respectively, It was observed that the particles were accumulated rapidly on the membrane surface as the feed flow rate increased, but the particles were not accumulated at 0.5 cm/sec, Also, it was confirmed that almost all of the particles in the layer already formed during filtration were removed within 30 seconds as the feed flow rate increased to 1.88 cm/sec.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.216-219
• /
• 2002

A novel approach of embedded systems for video coding is introduced with the main theme focused on logic-enhanced DRAM and configurable processor. This approach is aiming at reducing high computational costs and frequent memory accessing, which embedded systems are suffering with in the execution of video coding. According Co the software execution analysis, large size functions with intensive memory accesses are tuned to be executed by the logic-enhanced DRAM while small size functions repeatedly called are to be executed by dedicated instructions, which are newly introduced in the configurable processor. The proposed system can speed up H.263 video coding algorithm 7.4 times in comparison with the conventional embedded processor based system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1571-1578
• /
• 2014

Binary CDMA is a new standard technology for wireless communication developed by our country that makes high speed communications and good quality of services for multimedia data such as voice and video. In this paper we researched the design and implementation of a wireless Video Transmitter and Video Server - the main devices for the Automobile Wireless Camera System - based on the Binary-CDMA technology that makes them freely installed in any place without wired cables restriction.

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.49-61
• /
• 2001

Internet has been becoming widely popular and making rapid progress and network technologies is showing extension in data transmission speeds. Rapid and convenient multimedia services supplied with high quality and high speed are being needed, This paper treats of the design and implement method of clip-based video retrieval system on the world-wide-web environments. The implemented system consists of the content-based indexing system supporting convenient services for video contents providers and the web-based retrieval system in order to make it easy and various information retrieval for users on the world-wide-web. Three important methods were used in the content-based indexing system. Key frame extracting method by dividing video data, clip file creation method by clustering related information and video database build method by using clip unit, In web-based retrieval system, retrieval method by using a key word, two dimension browsing method of key frame and real-time display method of the clip were used. As a result. the proposed methodologies showed a usefulness of video content providing. and provided an easy method for searching intented video content.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.4
• /
• pp.205-212
• /
• 2007

In this paper, we present a prototype of view-switchable high-definition (HD) multi-view video transmission system. One of the major bottlenecks for the multi-view broadcasting system has been the hardware cost and transmission bandwidth. The proposed system focuses on software-based design, transmission over IP multicast networks, and flexible system configuration to address aforementioned problems. In the proposed system, we implement software stereo HD multiplexing, demultipiexing and decoding, and take advantage of high-speed broadband convergence networks to deliver HD video in real-time. Moreover, the proposed system can be scalable and flexible in terms of the number of views. Furthermore, in order to display any multiview video on 3D display monitor, a face tracking system is integrated to our system. Therefore, users can watch the different stereoscopic video at its related locations.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1372-1377
• /
• 2004

The contact wire uplift amount was measured for the conventional and the high speed catenary during KTX dynamic test period. The contact wire uplift amount is considered as a important parameter in determining and designing of the specific catenary. The measurements were conducted in wayside and onboard of KTX through the high speed camera and the current collection video monitoring system installed in KTX roof. This paper describes the measured results.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1649-1651
• /
• 2002

Ultra-wide bandwidth (UWB) detection method has been widely used as a front end detection scheme for the ultra-high frequency (UHF) partial discharge (PD) monitoring systems. A broad-band video detector module was developed and characterized for the UHF UWB PD detection systems. The useable bandwidth of the module is more than 2 GHz and it is optimized for 50-ohm systems. The detection sensitivity and dynamic range of the module were characterized by using a known ns-width RF pulses of GHz range. The dynamic range is more than 6-decades and the module can detect pulsed RF signals down to 1 nW. The detector module can eliminate expensive equipment such as high speed oscilloscopes and radio frequency (RF) spectrum analyzers. Therefore, it enables one to use slow speed data acquisition systems for the PD monitoring at the UHF range. The detector module was used to detect real PDs of about <3 pC. The module converts the UWB PD signals into a low-bandwidth video signal with a high signal-to-noise ratio.