• 한국해양공학회지
• /
• 제11권3호
• /
• pp.89-94
• /
• 1997

In the design of high speed fishing vessel, its hull form has to be decided from a view point of resistance and propulsion performance without negelction of seakeeping characteristics. In spite of many efforts, the performance improvement by hull form itself has its limitations, specially for high speed craft. In this paper, the development of performance of resistance and seakeeping improving appendage for high speed planing hull on behalft of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test.

• 수산해양기술연구
• /
• 제41권1호
• /
• pp.64-69
• /
• 2005

In spite of many efforts, in the design of high speed fishing vessel the sea-keeping performance improvement without neglection of resistance-propulsion performance by hull form itself has its limitations. In this paper, the development of sea-keeping improving appendage pitching and trim improver for high speed planing hull on behalf of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test and also has been proved the better resistance performance in the model test and full scale test.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.356-362
• /
• 2019

We collected AIS information on fishing vessels operating near Jeju Island, and analyzed appearance density of the Chinese fishing vessels and inferred the movements of the fishing grounds. AIS information was received from October 16, 2016 to October 16, 2017 and stored on a hard disk through a program called AisDecoder. Unauthorized fishing vessels within the Exclusive Fisheries Agreement Zone (EFAZ) operated near the EFAZ boundary, and the frequency of appearance of fishing vessels were high in the middle waters of Korea and Japan, 252 and 250 fishing zones. Chinese fishing vessels authorized to enter appeared scattered outside the Prohibiting Fishing Zone of the Large Trawlers (PFZLT), and the closer they were to the PFZLT boundary, the higher the appearance density. And the appearance of Chinese fishing vessels with a speed from 0 to 3 knots was mostly outside the EFAZ, showing high density in the waters close to the boundary between Korea and Japan. On the other hand, within the EFAZ, the frequency of appearance of Chinese fishing vessels was also low and scattered. The appearance of Chinese fishing vessels with a speed from 3 to 5 knots mostly shows some variability within the EFAZ, but the frequency of appearance was high and the density was high. The seasonal appearance of Chinese fishing vessels in the waters south of Jeju Island appeared in the southwest in the autumn and then moved south and southeast of Jeju Island in the winter, and in the spring and summer. They were considered going to other fishing grounds without fishing in the waters south of Jeju Island.

• 수산해양기술연구
• /
• 제38권4호
• /
• pp.289-292
• /
• 2002

TPI는 고속 활주선의 소음, 진동, 트림 및 핏칭운동을 감소시킨 것으로 실선 시운전에서 증명되었다. 또한 모형시험에서 저항성능도 미소하게나마 개선시킨 것으로 입증되었다

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.158-164
• /
• 2011

The study on the improvement of resistance performance is very important for coastal fishing boats in Korea, because the prices of fuel oil are gradually risen and the demand of high-speed fishing boats is increased lately. This study is concerned with the improvement of the resistance performance for Korean high-speed small coastal fishing boats. A semi-planing hull form of Korean small coastal fishing boat is selected in the role of initial hull. From the modification of the hull form parameters and the local characteristics of the hull form, the improvement of the resistance performance is achieved. The resistance performances of the initial and the modified hull forms are estimated by using a numerical simulation method. Also, ship model tests are carried out in ship model basin.

• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.1-8
• /
• 1995

본 연구는 퍼지모델링을 이용한 고속연안어선의 선형요소 결정을 내용으로 한다. 즉, 고속연안 어선의 전체 저항곡선 및 마력곡선을 고속연안어선의 선형요소 자료들로부터 퍼지모델링을 통해 도출하고, 그 결과를 모형시험 결과와 비교하고 있다. 또한, 퍼지모델링에 의한 전체 저항곡선 및 마력곡선이 고속연안어선의 선형요소 결정에 효율적으로 적용됨을 보이고 있다.

• 한국항해항만학회지
• /
• 제47권4호
• /
• pp.202-211
• /
• 2023

국내 해양사고에서 어선의 충돌사고는 타 선종보다 빈번하고 사고 심각도는 높은 편에 속한다. 과거 큰 피해를 불러온 국내 어선충돌사고의 시사점은 어선이 충돌 직전까지 높은 항행 속력을 유지하고 있었다는 것과 어선이 규모 차이가 큰 선박과 충돌하였다는 점에 있다. 본 논문에서는 어선의 충돌사고 결과로 나타나는 선박피해 심각도를 선박의 속력과 분석하여 상관관계를 확인하는 연구를 하였다. 이를위해 도로교통분야에서 활용되고 있는 유효충돌속도(Effective Impact Speed)라는 개념을 두 선박의 충돌상황에 적용하였고 2016년부터 2022년까지 해양사고 재결서 중 어선과 어선, 어선과 비어선 충돌사고 데이터를 수집하여 총 617척 선박의 유효충돌속도를 산출하였다. 분석된 데이터를 바탕으로 유효충돌속도를 독립변수, 선박피해 심각도를 종속변수로 하는 이항 및 다항 로지스틱 회귀분석을 수행하여 두 변수의 상관성을 살펴보았다. 분석결과 유효충돌속도와 선박피해 심각도가 서로 통계적으로 유의하다는 것과 선박피해심각도는 유효충돌속도와 함께 선박의 질량에도 큰 영향을 받는다는 것을 확인할 수 있었다.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.68-74
• /
• 2008

This study is concerned with the development of the basic planing hull form of small fishing boat in 25 knots high speed. A series of model test to determine the optimum performance hull form of actual fishing boat with 10 gross tonnage was carried out for 5 models made available planing hull form in the circulation water channel. Model test was performed with the resistance test to study the hydrodynamic characteristics of model ships and the sinkage and trim measurement to investigate the stability of model ships and also the wave pattern observation to analyze the effectiveness of model ships. As the result, the planing hull form of P-4 with deep V type bow can be derived as the best hull form with good performance especially in ship's resistance efficiency showing less residual resistance and sinkage and trim and the spray effect, etc..

• 해양환경안전학회지
• /
• 제5권2호
• /
• pp.45-55
• /
• 1999

The majority of fishing vessels(under 20 tonnages) in Korea have a high casualty accident of the flood and capsizing occurred by lack of stability. Actually, it is so difficult to make out the data of inclining and stability tests of small fishing vessels after building, because most of them were built on experiences of manufacturer. According to above reasons, the aim of this study is an attempt to propose a stability criteria of small fishing vessels as follows: Firstly, it is examined that the stability is driven from a transverse metacenter height of actual ships, which is able to obtain a basic drawing and stability data. Secondly, it is examined the heeling at high-speed turning, and the period of rolling according to B/D(breadth/depth). Finally, it is suggested the stability criteria by using a dynamic state which is applied in passenger boat and fishing vessels over 24 meters.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.757-762
• /
• 2010

Korean fishing boats have had appropriate hull forms for the safety, stability and convenience of fishing ability. However, Korean fishermen are recently concerned about the resistance performance and speed of Korean fishing boats, because the prices of fuel oil are gradually risen, also the exhausting of fish resources and the demand of high speed fishing boats are increased. Therefore, the necessity of the study on the improvement of resistance performance for Korean small coastal fishing boats is gradually increased. This study compares the hull form characteristics of Korean fishing boats with those of Japanese fishing boats, and the hull form of a representative Korean fishing boat is modified. From the modification of the hull form parameters for the Korean fishing boat, the improvement of resistance performances is evaluated. Moreover, the increase of resistance performances is also achieved from the modification of local characteristics for the hull form of the Korean fishing boat. A computational method and ship model tests in towing tank are used for the conformations of the improvement of resistance performance.