• 전기학회논문지
• /
• 제64권12호
• /
• pp.1782-1788
• /
• 2015

In this paper, analysis of the effects for construction tolerances on the current collection performance of high speed catenary system. The height of the contact wire is the geometrical position of the cantilever directly affects the current collection performance. Contact force when the height of the contact wire exceeds the construction tolerance were analyzed. As a result, the maximum contact force was analyzed to more than 350[N] that are recommended by EN50119. And when the geometrical position of the cantilever to exceeds the construction tolerance, the analysis results of uplift at the mast support points, it becomes 127[mm] that are recommended by UIC 799. If the construction tolerances exceeds the reference value, the current collection performance is deteriorated. Therefore, catenary system require high precision construction. In the future, there is a need for continuing research on the tolerance of catenary system in the actual operating state.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.572-579
• /
• 2001

본 연구에서는 유한요소해석을 통한 와이어 방전가공기의 설계검증을 위하여 두 모델을 선정하여 CAD 패키지 I-DEAS를 이용하여 3차원 유한 요소모델을 모델링한 후 상용 유한요소해석코드인 ABAQUS로 각 모델의 가공위치에 따른 해석을 수행하였다. JW-35A와 JW-60A 두 모델의 상호 비교 타당성 여부를 확인하기 위하여 ${\eta}-factor$ 개념을 이용하였다. 이어 공리적 설계 개념을 도입하여 오차보정을 위한 설계변수들의 선택과 방법이 적절함을 보이고 두 모델의 유한요소해석 결과를 상호 비교하여 구조물의 설계를 검증하고 변형 예측식을 유도하였다. 본 연구를 통해 유도된 변형 예측식 (5)-(6) 형태의 접근방법은 비단 방전가공기 뿐만 아니라 이와 유사한 형태의 공작기계에도 적용 할 수 있을 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.910-920
• /
• 2008

In Korea, more than 70% of the territory consists of mountains. Therefore, the construction of roads and railways has generally involved with a steep rock slope in which the event of rockfalls are often occurred due to the weathered rock conditions and rainfalls etc. This is dangerous when the rock falls into the road and railway on which vehicles and trains are running. In order to prevent such rockfalls, the rockfall protection fence consisting of post, wire rope, and PVC coating steel net has most used at the bottom of rock slopes. In a general practice, an absorbing rockfall energy, 50kJ is specified by the Ministry of Construction and Transportation. However, questions still remain about whether the rockfall protection fence works effectively or not. In this study, a typical wire rope used in the standard rockfall protection fence was replaced by the high carbon steel wire rod and to validate its capacity of rockfall energy absorbing the field rockfall tests were conducted. The testing results show that a new rockfall protection fence using the high carbon steel wire rods can absorb the rockfall energy more than 50kJ and 20% of construction cost was saved in comparison with the previous rockfall protection fence.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.886-890
• /
• 2013

Uplift of contact wire and dynamic characteristics between pantograph and contact wire are key interaction performance of OCS (Overhead Catenary System). These two evaluation items are the approval criteria for the performance between OCS and pantograph. A telemetry system or DAQ (Data Acquisition) System based on wireless communication make it monitor a dynamic behavior which is measured directly in a 25 kv like parts. While permissible working time is too short time to install is too long. In this paper, it is described that optimization the telemetry measurement system for OCS and increasing accuracy, easy adaptation, and faster handling can be also achieved through the study.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.47-52
• /
• 2013

Gold wire has long been used as a proven method of connecting a silicon die to a substrate in wide variety of package types, delivering high yield and productivity. However, with the high price of gold, the semiconductor packaging industry has been implementing an alternate wire material. These materials may include silver (Ag) or copper (Cu) alloys as an alternative to save material cost and maintain electrical performance. This paper will analyze and compare the electrical characteristics of several wire types. For the study, typical 0.6 mil, 0.8 mil and 1.0 mil diameter wires were selected from various alloy types (2N gold, Palladium (Pd) coated/doped copper, 88% and 96% silver) as well as respective pure metallic wires for comparison. Each wire model was validated by comparing it to electromagnetic simulation results and measurement data. Measurements from the implemented test boards were done using a vector network analyzer (VNA) and probe station setup. The test board layout consisted of three parts: 1. Analysis of the diameter, length and material characteristic of each wire; 2. Comparison between a microstrip line and the wire to microstrip line transition; and 3. Analysis of the wire's cross-talk. These areas will be discussed in detail along with all the extracted results from each type the wire.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.733-737
• /
• 2016

In this paper, we propose a mechanism that can compensate for gravity in a robot manipulator. Industry robots generate torque due to carrying heavy weight. For this reason, the robots need high specification motors, which increases the prices of the robots and their production costs. In order to resolve these problems, a mechanism for gravity compensation has been developed using a spring and wire system. But this system has problems related to wire stretching. A winding mechanism is therefore used to supplement this drawback of the wire. The robot used was developed by the 1-DOF system. Analysis was performed for the performance of the mechanism. Experiments were conducted to compare simulation results and experimental results.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권2호
• /
• pp.26-31
• /
• 2020

Since 2014, Sam Dong Co., Ltd. has successfully developed high-performance MgB₂ superconducting wires with a kilometer-scale. Herein, we studied performances of various MgB₂ wires fabricated by the Sam Dong with different Cu fractions and diameters for practical applications. Critical current densities of our commercial wire, 18+'1'Cu multifilamentary MgB₂ wire, are estimated to be 270,000 A/㎠ at 3 T and 4.2 K and 100,000 A/㎠ at 2 T and 20 K, respectively. We further discuss research progress of various MgB₂ superconducting wires at Sam Dong Co., Ltd and make an effort to align with customers' requirements.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.1-5
• /
• 2019

The overhead contact line (OCL) is a key piece of equipment for transmitting electrical energy to the pantograph of rail cars. Recently, a 400 km/h OCL was applied to the Honam high-speed line, and its performance was examined by running HEMU-430X. For the study, we analyzed the current of catenary wire concurrently while running HEMU-430X in the Honam high-speed line. Specifically, this study recorded the currents for each speed during operation of the railway vehicle. The analysis of the frequency of line current showed generation of third-harmonics, 15th-harmonics, 17th-harmonics, and 19th-harmonics. The current of catenary wire is a basic technology assessment used to determine the electrical safety of electric railway systems, and it can be used as a technology for analyzing circulating currents generated in the current configuration, as well as for analyzing electric fatigue of the OCL components.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.451-454
• /
• 2004

We studied on the performance optimized synthesis and mapping of design on to one or more FPGA device. Our multi-phased approach optimized the key parameters that affect performance by adequately modeling the impact on wire length, routability, and performance during technology mapping to produce designs that have high performance and high routability potential.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (1)
• /
• pp.581-583
• /
• 2000

We are studied on the performance optimized synthesis and mapping of design on to one or more FPGA device. our multi-phased approach optimized the key parameters that affect performance by adequately modeling the impact on wire length, routability, and performance during technology mapping to produce designs that have high performance and high routability potential.