• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.19-23
• /
• 2003

Polished surface of $CsB_{3}O_{5}$ (CBO) has been observed by reflection high energy electron diffraction (RHEED) and X-ray photoelectron spectroscopy (XPS). For comparison, electronic properties of CBO powder have been studied by XPS. It has been found that the crystal surface is covered by thick amorphous layer with chemical composition closely related to that of CBO. Great enrichment of top surface by cesium, ~30 % in reference to the bulk of the modified layer, has been displayed by depth profiling.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.2
• /
• pp.69-73
• /
• 2016

We use the non-stationary three dimensional two-layer outer gap model to explain gamma-ray emissions from a pulsar magnetosphere. We found out that for some pulsars like the Geminga pulsar, it was hard to explain emissions above a level of around 1 GeV. We then developed the model into a non-stationary model. In this model we assigned a power-law distribution to one or more of the spectral parameters proposed in the previous model and calculated the weighted phase-averaged spectrum. Though this model is suitable for some pulsars, it still cannot explain the high energy emission of the Geminga pulsar. An Inverse-Compton Scattering component between the primary particles and the radio photons in the outer magnetosphere was introduced into the model, and this component produced a sufficient number of GeV photons in the spectrum of the Geminga pulsar.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.237-240
• /
• 2014

For heat-assisted magnetic recording, magnetization reversal probabilities of nano-Pt/MnSb multilayer film with perpendicular magnetic anisotropy under thermal pulse activation were investigated numerically by solving the Landau-Lifshift Gilbert Equation. Magnetic parameters of nano-Pt/MnSb multilayer were used with anisotropy energy of $3{\times}10^5$ erg/cc and saturation magnetization of 2100 G, which offer more than 10 y data stability at room temperature. Scheme of driven magnetic field and thermal pulse on writing mechanism was designed closely to real experiment. This study found that the chosen material is potential to be used as a high density magnetic storage that requires low writing field less than two-hundreds Oersted through definite heating and cooling interval. The possibility of writing data with a zero driven magnetic field also became an important result. Further study is recommended on the thickness of media and thermal pulse design as the essential parameters of the reversal magnetization.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.59-65
• /
• 1999

There has been an interest to develop an efficient, compact microwave device using field-emitter-arrays (FEA)-based cathode. Toe valuate the optimum device-efficiency in a compact size, the propagation properties of the premodulated electron beam for the FEA-based cathode is studied in detail by the computer simulation using a PIC code, MAGIC. For the premodulated electron beam whose phase of the energy leads the phase of the current by $\pi$/2, the amplitude of the downstream current modulation can be kept as high as the initial modulation level. Using the beam parameters with the beam voltage of 6kV and the current of 2.0A, 30% of efficiency is predicted when the quality factor of 800 is chosen. the device length is reduced about twice compared with that of the conventional device. The design of practical planar cathode is carried out to meet the minimum diameter of the electron beam as 0.5 mm.

• Journal of the Optical Society of Korea
• /
• v.18 no.1
• /
• pp.50-54
• /
• 2014

In this paper we studied the laser-induced crater depth, mass, and emission spectra of laser-ablated high-density polyethylene (HDPE) polymer using the laser-induced plasma spectroscopy (LIPS) technique. This study was performed using a Nd:YAG laser with 100 mJ energy and 7 ns pulse width, focused normal to the surface of the sample. The nanoscale change in ablated depth versus number of laser pulses was studied. By using scanning electron microscope (SEM) images, the crater depth and ablated mass were estimated. The LIPS spectral intensities were observed for major and minor elements with depth. The comparison between the LIPS results and SEM images showed that LIPS could be used to estimate the crater depth, which is of interest for some applications such as thin-film lithography measurements and online measurements of thickness in film deposition techniques.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.475-476
• /
• 2015

We analyze the host galaxy of the tidal disruption object, Swift J1644+57, based on long-term optical to NIR data obtained with CQUEAN and UKIRT WFCAM observations. We decompose the bulge component using high resolution HST WFC3 images. We conclude that the host galaxy is bulge dominant. We investigate optical to NIR light curves and estimate the multi-band fluxes of the host galaxy. We fit spectral energy distribution (SED) models in order to determine the stellar mass. Finally, we estimate the mass of the black hole in the center of the host galaxy based on several scale relations.

• Current Optics and Photonics
• /
• v.7 no.1
• /
• pp.90-96
• /
• 2023

We numerically solve the nonlinear Schrödinger equation for pulse propagation in a passively mode-locked Yb:KGW laser. The soliton-like pulse formation as a result of balanced negative group-delay dispersion (GDD) and nonlinear self-phase modulation is analyzed. The cavity design and optical parameters of a previously reported high-power Yb:KGW laser were adopted to compare the simulation results with experimental results. The pulse duration and energy obtained by varying the small-signal gain or GDD reproduce the overall tendency observed in the experiments, demonstrating the reliability and accuracy of the model simulation and the optical parameters.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.4
• /
• pp.451-456
• /
• 2024

Organic photovoltaic (OPV) devices have attracted attention due to their high efficiency and simple manufacturing process. Applying an overlayer to OPV devices is one way to improve their performance because it can improve charge extraction and suppress vertical phase separation. In addition, dichloromethane (DCM) was used as an orthogonal solvent to minimize the effect on other layers. However, an coating problems due to the use of DCM were found, which affects surface morphology as rough or peeling. Additional research efforts are needed to solve these problems, and optimal results are expected to be obtained by utilizing various buffer layers or selective organic solvents.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2516-2523
• /
• 2024

This study aims to validate the dosimetric characteristics of Low Dose Rate (LDR) I-125 source Geant4-based Monte Carlo code. According to the recommendation of the American Association of Physicists in Medicine (AAPM) task group report (TG-43), the dosimetric parameters of a new brachytherapy source should be verified either experimentally or theoretically before clinical procedures. The simulation studies are very important since this procedure delivers a high dose of radiation to the tumor with only a minimal dose affecting the surrounding tissues. GEANT4 Monte Carlo simulation toolkit associated brachytherapy example was modified, adapted and several updated techniques have been developed to facilitate and smooth radiotherapy techniques. The great concordance of the current study results with the consensus data and with the results of other MC based studies is promising. It implies that Geant4-based Monte Carlo simulation has the potential to be used as a reliable and standard simulation code in the field of brachytherapy for verification and treatment planning purposes.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.288-294
• /
• 2017

This paper contains results of the theoretical studies of the electrical breakdown properties in sulfur hexafluoride. Since the strong interaction of high-energy electrons with the polyatomic sulfur hexafluoride molecule causes their rapid deceleration to the lower energy of electron capture and dissociative attachment, the breakdown is only possible at relatively high field strengths. From the breakdown voltage curves, the effective yields that characterize secondary electron productions have been estimated. Values of the effective yields are found to be more consistent if they are derived from the experimentally determined values of the ionization coefficient and the breakdown voltages. In addition, simulations were performed using an one-dimensional Particle-in-cell/Monte Carlo collision code. The obtained simulation results agree well with the available experimental data with an error margin of less than 10% over a wide range of pressures and the gap sizes. The differences between measurements and calculations can be attributed to the differences between simulation and experimental conditions. Simulation results are also compared with the theoretical predictions obtained by using expression that describes linear dependence of the breakdown voltage in sulfur hexafluoride on the pressure and the gap size product.