• 한국자기학회지
• /
• 제5권5호
• /
• pp.690-694
• /
• 1995

Reducing media noise is a key to realizing high areal recording density. However, perpendicularly oriented Co-Cr films, stong candidates for high density recording media, have received little attention in terms of recording noise. We studied the noise characteristics of Co-Cr based alloy films by varying the compositionally separated structure. Co-Cr films with fine compositionally separated microstructure were observed to have low noise, which recording density dependence were negative or week. Studies on control of the microstructure and magnetic properties in combination with noise analysis are important to realize high density recording media.

• Journal of Magnetics
• /
• 제8권4호
• /
• pp.164-168
• /
• 2003

In high density recording system, the recording head field on a medium should be focused in small bit area and should have a sufficient value to overcome the medium coercivity, which resulted in head saturation. In this paper, an efficient method to access the head field and field gradient considering head saturation is presented. The magnetic vector potential on the head surface is pre-calculated considering head saturation in several cases and accumulated into database. The head field on the recording media is easily produced solving Laplace equation using accessed magnetic vector potential boundaries. The computed head field is compared with a quantified magnetic force microscopy measurement.

• 한국통신학회논문지
• /
• 제37A권10호
• /
• pp.821-826
• /
• 2012

Two-dimensional magnetic recording (TDMR) is treated as the next generation magnetic recording method, but because of its high channel bit error rate, it is difficult to use in practices. In this paper, we introduce a new writing method that can decrease the nonlinear media error effectively, and it can also achieve 10 Tb/$in^2$ of user bit density on a magnetic recording medium with 20 Teragrains/$in^2$.

• 전자공학회논문지B
• /
• 제30B권12호
• /
• pp.31-39
• /
• 1993

In the playback signal processing of a digital magnetic recording system, the major signal processing processes consist of pulse equalization. pulse detection, clock recovery, and data recovery. Equalizer which compensates interference occurrde between pulses recorded in high density on a magnetic media is realized by pulse slimming method, and pulse detection by a integrating detector. Clock recovery from the detector output was accomplished by using PLL. and data recovery to reduce noise effects was carried out by utilizing the three sampling clocks recovered in clock recovery process. In this paper these processes are implemented in hardware and its performance is evaluated by experimenting with a commercial DAT. It was found that the playback signal processor proposed is suitable to the practical high density magnetic recording system.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.133-141
• /
• 1996

As the recording density of digital magnetic recording channels increased, the nonlinear distortion caused by inadequate rise-times, demagnetizing field, and overwrite effect during the recording process becomes significant, resulting in limitation on the recording rate. In this paper, a new method for identifying the nonlinear distortion in hihg-density magnetic recording channel using and i.i.d. (independent, identically distributed) inut is described. The proposed method does not require the operatin of large-size matrix inversion which are necessary for the conventional method, and it enables us to estimate nonlinear parameters transition shifts, which can be used to compensate the nonlinear distortion, is demonstrated by computer simulations.

• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1565-1571
• /
• 1995

Misalignment of recording head position results in inter-track interference (ITI), which is a primary factor limiting radial(track) density in current digital magnetic channels. This paper proposes a multi- channel adaptive PRML for digital high-density recording channels, and compares it with the conventional single-channel PRML in the presence of ITI for the per- formance evaluation. Simulation results show that the proposed method removes ITI effectively when heal-misalignment occurs, then improving its performance significantly as compared with the single- channel PRML. As a result, it is confirmed that multi-channel adaptive PRML is well suited for high-density recording in digital magnetic channels.

• 한국표면공학회지
• /
• 제37권4호
• /
• pp.196-199
• /
• 2004

Seedlayers with low surface energy which increases the density of nucleation sites in the initial growth region of the recording layer deposited on them was studied to reduce grain size in recording layer. The seedlayer with low surface energy was so effective to attain finer grain in magnetic upper-layers. The Ni-Fe-O intermediate layer with low surface energy was found to be effective in reduction of grain size as well as magnetic cluster size of Co-Cr-Ta-Pt recording layer. Furthermore, the reduction of grain size in Co-Cr-Ta-Pt recording layer on Ni-Fe-O intermediate layer with low surface energy led to decrease the noise level in the high recording density region.

• 한국자기학회지
• /
• 제16권2호
• /
• pp.149-156
• /
• 2006

자기 기록 시스템은 시간의 흐름에 따라 기록 밀도는 높아지고 있고 또한 기록 속도 역시 빨라지고 있다. 더욱 빠른 기록 속도의 요구 치로 인하여 자기 기록 헤드에 인가되어지는 기록 주파수 역시 높아져야 하고 또한 기록이 일어나는 기록 미디어의 회전 속도 역시 빨라져야 한다. 이와 같은 두 가지 요건은 헤드와 기록 미디어에서 와전류를 발생시키게 된다. 기록 헤드에서는 기록 주파수에 의해 발생되는 와전류가 존재한다. 그리고 기록 미디어에서는 기록 주파수에 의해 발생되는 와전류와 회전하는 미디어의 선속도에 의해 발생하는 와전류가 존재하게 된다. 본 논문에서는 비선형 3차원 유한 요소법을 이용하여 자기 기록 헤드에서 발생하는 와전류와 기록 미디어에서 발생하는 두 종류의 와전류의 분포를 분석하고 이와 같이 발생한 와전류가 자기 기록시스템에서 자기 기록 필드에 미치는 영향에 대해서 연구하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.178-179
• /
• 2002

CoCrPt alloy films are one of the most promising candidates for high-density perpendicular magnetic recording media due to their strong perpendicular magnetic anisotropy (PMA) and high coercivity [1]. In order to achieve high-density magnetic recording media, it is essential to characterize the magnetoelastic properties since experimental and theoretical research has revealed a significant magnetoelastic contribution to the magnetic properties in magnetic thin films. (omitted)

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.68-69
• /
• 2009

Heat Assisted Magnetic Recording (HAMR) is one of the most promising candidates for high density magnetic storages over 1 Tb/$in^2$ areal density. Since the precise light delivery to the head is a key factor to realize HAMR application, it is required to establish the light delivery using micro laser module and micro actuator. For the careful control of micro actuator, a laser module was designed including laser diode, optical fiber, collimating lens, and fabricated V-groove substrate. In addition, the basic aligning method between the laser module and HAMR head was studied by the detection of current change in photo diode due to the amount of reflected light from the head.