• 지질공학
• /
• 제24권2호
• /
• pp.201-215
• /
• 2014

본 연구에서는 창원시 강변여과수 개발사업(2단계)에서 얻어진 자료들을 이용하여 대수층의 수리전도도와 방사형집수정의 수평집수관에서 산출되는 유량과의 상관관계를 규명하고자 하였다. 연구지역인 낙동강 중하류 모래자갈층에서 수평적으로 채취한 미고결 퇴적물의 시료를 이용하여 경험식에 의한 수리전도도를 산정하였다. 여러 경험식을 이용하여 연구지역에서 수리전도도를 산정한 결과, Beyer식에 의한 수리전도도가 가장 적합한 것으로 판정되었다. 산정된 수리전도도는 0.083 ~ 0.264 cm/s의 범위, 평균 0.159 cm/s로 나타내고 있어 연구지역의 대수층 특성은 모래자갈층에 투수성이 양호한 것으로 나타났다. 산정된 수리전도도와 실측자료에 의한 스크린 내 지하수의 유입속도 및 유량과의 상관관계를 분석하고자 회귀분석을 실시하였다. 회귀분석 결과, 수리전도도와 지하수의 유입속도 및 유량은 약 72 %의 높은 상관관계를 가지는 것으로 나타났고, 각 변수들 간에 실측자료와의 검증에서도 약 72 %가 일치하는 것으로 분석되어 선형 회귀식은 높은 적합성을 나타내었다. 본 연구의 결과로서 선형 회귀식을 이용하여 수리전도도에 의한 방사형집수정의 수평집수관에서 산출되는 유량의 추정이 가능하고, 연구지역과 유사한 대수층에서 적용이 가능할 것이라고 사료된다.

• 한국작물학회지
• /
• 제39권2호
• /
• pp.158-164
• /
• 1994

Polyme coating 종자의 환경적응성을 구명하기 위한 일환으로 콩 종자에 10종의 polymer를 coating하여 각 coating polymer별 conductivity, 발아력, 수분흡수력을 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. Conductivity는 polymer coating한 종자가 coating하지 않은 종자보다 높았으며, 가장 높았던 polymer는 waterlock이었다. 2. Conductivity는 침종 후 시간이 경과할 수록 높아졌고, 100립중이 무거울 수록 높았다. 3. 수확년도가 오래된 종자의 conductivity가 당년에 수확한 종자보다도 높게 나타났다 4. 수분흡수 정도는 coating polymer에 따라 각각 달랐는데 daran 8600은 질이 떨어지는 종자에서는 수분흡수를 크게 저 해하였다. 5. Coating polymer 중 waterlock, captan, klucel, sacrust 등은 발아율을 상승시켰고, daran 8600은 발아율을 저하시켰으며 나머지 polymer는 품종에 따라 각각 달랐고 그 정도는 질이 떨어지는 종자에서 훨씬 컸다. 6. Polymer의 특성에 따라 수분흡수를 저해하거나 조장하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3401-3406
• /
• 2007

This study was performed to acquire the reliable in-situ thermal conductivity of closed type ground heat exchanger used in ground source heat pump. We selected four sites(Cheonan, Daejeon, Daegu, Gwangju) which are central area of South Korea. Test results show that the effective thermal conductivities are 2.33 W/m$^{\circ}C$, 2.50 W/m$^{\circ}C$, 2.75 W/m$^{\circ}C$ and 2.86 W/m$^{\circ}C$. From this data, we can see that thermal conductivity varies about the range of 23% with the sites. Also, thermal conductivity increases up to 20% by changing grouting material from low salica sand to high one.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.968-975
• /
• 2004

Nanofluids have anomalously high thermal conductivities at very low fraction, strongly temperature-dependent and size-dependent conductivities, and three-fold higher critical heat flux than that of base fluids. Traditional conductivity theories such as the Maxwell or other macroscale approaches cannot explain why nanofluids have these intriguing features. So in this paper, we devise a theoretical model that accounts for the fundamental role of dynamic nanoparticles in nanofluids. The proposed model not only captures the concentration and temperature-dependent conductivity, but also predicts strongly size-dependent conductivity. Furthermore, we physically explain the new phenomena for nanofluids. In addition, based on a proposed model, the effects of various parameters such as the ratio of thermal conductivity of nanofluids to that of a base fluid, volume fraction, nanoparticle size, and temperature on the thermal conductivities of nanofluids are investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 1998

In this paper, the physical and conductivity properties due to the electron beam irradiation for low density polyethylene using insulating materials of the distribution cable and ultra-high voltage cable are studied. The specimens of the low density polyethylene of thickness 100[$\mu\textrm{m}$] irradiated as each 1 [Mrad], 2[Mrad], 4[Mrad], 8[Mrad], 16[Mrad] and virgin are used in this experiment. In order to measure the conductivity properties, the micro electrometer is used, the range of temperature and app1ying voltage are 20 to 120[$^{\circ}C$], from 100 to 1000[V] respectively So. as a result of the conductivity properties, it is confirmed that the conductivity is increased nearly to 50[$^{\circ}C$], and is not changed until the crystalline melting point from the temperature over 60[$^{\circ}C$] because of the defects of morphology and the formation of many trap centers by means of electron beam irradiation

• Carbon letters
• /
• 제9권2호
• /
• pp.105-107
• /
• 2008

In this work, we employed an electroless nickel plating on glass fibers in order to enhance the electric conductivity of fibers. And the effects of metal content and plating time on the conductivity of fibers were investigated. From the results, island-like metal clusters were found on the fiber surfaces in initial plating state, and perfect metallic layers were observed after 10 min of plating time. The thickness of metallic layers on fiber surfaces was proportion to plating time, and the electric conductivity showed similar trends. The nickel cluster sizes on fibers decreased with increasing plating time, indicating that surface energetics of the fibers could become more homogeneous and make well-packed metallic layers, resulting in the high conductivity of Ni/glass fibers.

• Transactions on Electrical and Electronic Materials
• /
• 제5권4호
• /
• pp.129-132
• /
• 2004

The electrothermal characteristics of a high voltage LIGBT(Lateral Insulated Gate Bipolar Transistor) using thin silicon on insulator (SOI) and silicon on sapphire (SOS) such as thermal conductivity and sink is analyzed by MEDICI. The device simulations demonstrate that the thermal conductivity of the buried oxide is an important parameter for modeling of the thermal behavior of SOI devices. In this paper we simulated the thermal conductivity and temperature distribution of a SOI LIGBT with an insulator layer of SiO$_2$ and $Al_2$O$_3$ at before and after latch-up and verified that the SOI LIGBT with the $Al_2$O$_3$ insulator had good thermal conductivity and reliability.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.71-74
• /
• 2010

We have investigated protonic conduction in highly dense (>98%) polycrystalline Y-doepd $BaZrO_3$ (BYZ) ceramic with an average grain size of ~85 nm. It is observed that the protonic conductivity across the grain boundaries in this nano-crystallilne BYZ (n-BYZ) is significantly higher than the microcrystalline counterpart. Such a remarkable enhancement in grain boundary conductivity results in high overall conductivity that may allow this chemically stable protonic conductor to serve as a solid electrolyte for low-temperature solid oxide fuel cell applications.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.77-80
• /
• 2005

A series of proton conductive composite membranes based on poly(vinyl alcohol) and phosphosilicate gels powders were successfully prepared. The proton conductivity of these composite was attributed to the phosphosilicate gel, which derived from tetraethoxysilane and phosphoric acid by sol-gel process at a molar ratio of P/Si = 1.5. The proton conductivity increased with increasing both the content of phosphosilicate gel and relative humidity. Temperature dependence of conductivity showed a Vogel-Tamman-Fulcher type behavior, indicating that proton was transferred through a liquidlike phase formed in micropores of phosphosilicate gel. The high conductivity of 0.065 S/cm with a membrane containing 60 wt$\%$ of the gel was obtained at $60^{\circ}C$ at $90\%$ relative humidity.

• 한국컴퓨터산업교육학회:학술대회논문집
• /
• 한국컴퓨터산업교육학회 2003년도 제4회 종합학술대회 논문집
• /
• pp.79-82
• /
• 2003

The electrothermal simulation of high voltage LIGBT(Lateral Insulated Gate Bipolar Transistor) in thin Silicon on insulator (SOI) and Silicon on sapphire (SOS) for thermal conductivity and sink is performed by means of MEDICI. The finite element simulations demonstrate that the thermal conductivity of the buried oxide is an important parameter for the modeling of the thermal behavior of silicon-on-insulator (SOI) devices. In this paper, using for SOI LIGBT, we simulated electrothermal for device that insulator layer with $SiO_2$ and $Al_2O_3$ at before and after latch up to measured the thermal conductivity and temperature distribution of whole device and verified that SOI LIGBT with $Al_2O_3$ insulator had good thermal conductivity and reliability.