• 제목/요약/키워드: high calcium silicate

검색결과 85건 처리시간 0.03초

C-S-H계 조강제 첨가에 따른 혼합시멘트의 조기 강도 발현 특성 (Characteristics of early strength development of blended cement according to the addition of C-S-H based Hardening acceleration)

  • 안태윤;라정민;박준형;김진만
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.127-128
    • /
    • 2022
  • In order to realize carbon neutrality in the international society, research on supplementary cementitious materials(SCMs) has been actively conducted as a way to reduce carbon dioxide emissions in the cement industry. However, the use of SCMs causes problems of initial hydration delay and strength reduction due to the reduction of tricalcium silicate(C3S) in the cement clinker. Therefore, in this study, the initial hydration and basic characteristics of cement mortar were confirmed by adding a C-S-H based hardening acceleration to blended cement mixed with Portland cement, blast furnace slag, fly ash, and limestone power. As a result of the heat of hydration and compressive strength test, it was confirmed that when hardening acceleration was added, the initial reactivity was high, so the heat of hydration was promoted, and the initial strength was increased. It is considered to be due to C-S-H seeding effect. Therefore, it is judged that the use of C-S-H based hardening acceleration can supplement the problem of initial hydration delay of blended cement in Korea.

  • PDF

하해혼성(河海混成) 논토양(土壤)의 양분수지(養分收支)에 관한 연구 (Study on Nutrient Balance in Paddy Field of Fluvio-Marine Deposit)

  • 유철현;양창휴;강승원;한상수
    • 한국토양비료학회지
    • /
    • 제35권5호
    • /
    • pp.253-263
    • /
    • 2002
  • 벼 재배시 시용한 비료와 자재양분의 이동과 흡수에 미치는 영향을 구명하고자 전북통에서 동진벼를 공시하여 2개년간(1999~2000)시험한 결과는 다음과 같다. 시험후 토양의 pH는 생우분 시용구에서 높아졌고 유기물, 인산, 규산, 칼리, 석회, 전질소함량이 증가하였고, 토층내로의 침투수중 무기태질소함량은 $NH_4-N$보다 $NO_3-N$함량이 월등히 많았으며 그 정도는 생우분시용구에서 높았으며, $PO_4-P$함량은 생우분시용구에서 타처리 보다 높았으나 K함량은 표준시비구에서 높았다. 벼 생육기간중 물의 소비량은 477mm였으며, 양분의 공급량과 소비량 중 질소는 무질소구, LCU20%감비구, 무비구에서 공급량보다 소비량이 많았으며, 인산의 경우는 무인산, 무비구를 제외하고는 공급량보다 소비량이 적었다. 또한 칼리는 모든 처리에서 공급량보다 소비량이 많았다. 양분의 침투수 중 시비질소는 진단시비, 표준시비+생우분+규산시용구에서 많았고 수확물의 질소회수율은 LCU20%감비구에서 높았다. 시비인산의 침투율은 생우분시용구에서 많았고, 시비칼리는 LCU20%감비구에서 많았다. 수도체 질소이용율은 LCU20%감비, 인산과 칼리의 이용율은 표준시비+규산시용구에서 높았다. 쌀수량은 진단시비 대비 LCU20%감비>표준시비+규산=표준시비+생우분+규산>표준시비+생우분 순으로 높았다.

시멘트 페이스트를 이용한 혼합 불산폐수 처리 (Treatment of Mixed Fluoride Wastewater Using Cement Paste)

  • 변혜정;최원호;박주양
    • 대한환경공학회지
    • /
    • 제29권8호
    • /
    • pp.909-914
    • /
    • 2007
  • 불소 화합물은 반도체 및 LCD 제조공장의 식각 공정에서 사용되는 필수적인 화학물질이다. 불산폐수 처리를 위한 기존 처리방법의 문제점은 유지비가 많이 들고, 불소 처리효율이 낮은 것이다. 이에 본 연구에서는 고효율, 저비용의 혼합 불산폐수 처리를 위하여 다량의 portlandite, calcium silicate hydrate와 ettringite 등의 칼슘 수화물을 함유하고 있는 시멘트 페이스트를 혼합 불산폐수 처리에 적용하였다. 본 연구의 목적은 시멘트와 물을 혼합하여 양생시킨 시멘트 페이스트의 실제 폐수처리 가능성을 파악하고 불산폐수 처리효율을 평가하고자 하는 것이다. 시멘트 페이스트는 회분식 실험에서 소석회에 상응하는 불소제거효율을 나타내었다. 연속식 컬럼 실험 결과, 불소 농도는 약 0.5 mg/L 이하로 안정적으로 처리되었으며, 칼슘 농도는 800 mg/L로 높게 측정되었다. 폐수 내 nitrate도 처리되었는데, 이는 시멘트 수화물 중 LDHs 계열물질의 interlayer에 존재하는 sulfate와의 이온교환으로 제거되는 것으로 판단된다. Phosphate는 다양한 칼슘화합물 생성으로 10 mg/L 이하로 감소하였다. 따라서 시멘트 페이스트는 기존 처리제인 소석회를 대체할 수 있는 경제적이고 실제 처리공정에 적용 가능한 물질로 판단된다.

알루미나 골재 첨가에 따른 플라이애쉬-고로슬래그계 지오폴리머의 열적특성 (Thermal property of geopolymer on fly ash-blast furnace slag system with the addition of alumina aggregate)

  • 김진호;남인탁;박현;김경남
    • 한국결정성장학회지
    • /
    • 제27권1호
    • /
    • pp.47-56
    • /
    • 2017
  • 본 연구에서는 Alumina 골재를 사용한 fly ash-blast furnace slag계 Geopolymer의 내열성 건축자재로서의 사용 가능성을 검토하기 위하여 고온조건에서의 열적 특성에 대하여 조사하였다. 모든 배합조건에서 Geopolymer 경화체의 표면 크랙은 $800^{\circ}C$까지는 관찰되지 않았으며, 이것은 열처리 전후 강도의 변화가 작은 것과 일치한다. 또한, $800^{\circ}C$까지 고로슬래그의 혼합비율이 60 wt%일 때 잔존압축강도가 가장 우수한 것으로 나타났다. Geopolymer 경화체의 주요 수화 생성물은 $20{\sim}35^{\circ}$(2theta) 범위의 비정질 halo 패턴과 원재료의 mullite($3Al_2O_3{\cdot}2SiO_2$)와 quartz($SiO_2$)가 확인되었다. 비정질 halo 패턴은 Geopolymer 축중합 반응에 의해서 생성된 aluminosilicate gel이며, $800^{\circ}C$까지는 aluminosilicate gel의 halo 패턴이 유지되고 있음을 알 수 있다. $1,000^{\circ}C$에서 aluminosilicate gel의 패턴은 사라지며 열처리온도의 증가와 함께 gehlenite, calcium silicate, calcium aluminum oxide, microcline와 같은 결정상이 관찰되었다.

직물에 침착된 Calcium의 제거에 관한 연구 (A Study on the Removal of Deposited Calcium on the Cotton Fabric.)

  • 한혜원;강혜원;김성련
    • 한국의류학회지
    • /
    • 제7권2호
    • /
    • pp.19-25
    • /
    • 1983
  • The purpose of this study was to investigate the effects of laundry variables and additives on the removal of deposited calcium on the cotton fabric. Samples of calcium deposited fabric was made by treating fabric with $CaC1_2$ and $Na_2CO_3$ solution subsequently. The experimental variables were: 1) NaOH concentration ($0.0001\%$, $0.0005\%$, $0.001\%$, $0.005\%$, $0.01\%$) 2) Alkaline builders(sodium carbonate, sodium meta silicate) 3) Sequestering agents(STPP and EDTA concentration: $0.02\%$, $0.04\%$, $0.06\%$, $0.08\%$, $0.1\%$, $0.15\%$, $0.2\%$) 4) Temperatures($25\pm1^{\circ}C$, $40\pm1^{\circ}C$, $60\pm1^{\circ}C$) 5) Edge-abrasion to the removal of deposited calcium on the cotton fabric. The fabric was washed for 15 minutes in a washing machine(Model: Gold Star WP-3007) or Launder-0-meter(40$\~$45 r.p.m., Toyo Rika Instrument Inc.) and rinsed 3 times per every rinsing time. The amount of calcium deposits on the fabrics was determined by EDTA-back titration methods and edge-abrasion was evaluated by ASTM D 3886 method. The results of this study were as follows: 1) pH of surfactant solution(NaOH concentration) did not influence on the removal of deposited calcium on the cotton fabric. 2) Added alkaline builders did not influence on the removal of deposited calcium on the cotton fabric. 3) It was shown that STPP and EDTA were effective to remove deposited calcium. The removal of deposited calcium on the cotton fabric was proportionally increased with increasing concentration of STPP and EDTA. At high concentration, however, the rate was rather decreased with increasing concentration. 4) The temperature of washing solution did not influence on the removal of dedosited calcium on the cotton fabric. 5) As the removal of deposited calcium on the cotton fabric was increased, the rate of edge-abrasion of the fabric was gradually increased.

  • PDF

고유동 대량치환 슬래그 모르타르의 공학적 특성 (The Engineering Properties of High Fluidity mortar with High Volume Slag Cement)

  • 배주룡;김태완;김인태;김민정
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권5호
    • /
    • pp.12-20
    • /
    • 2017
  • 본 연구는 규산나트륨($Na_2SiO_3$)으로 활성화된 고유동 대량치환슬래그 시멘트의 기초특성에 관한 연구이다. 고로슬래그 미분말(GGBFS)은 보통포틀랜드 시멘트(OPC)의 40%에서 80%까지 질량치환하고 칼슘설포알루미네이트(CSA)는 2.5%와 5.0% 치환하였다. 규산나트륨($Na_2SiO_3$)은 전체 결합재(OPC+GGBFS+CSA) 질량의 2%와 4% 추가하였다. 모든 배합의 물-결합재 비(w/b)는 0.35이다. 본 연구에서는 미니슬럼프, V-funnel, 응결시간, 압축강도와 건조수축을 측정하였다. 실험결과 유동화제 양, V-funnel, 응결시간과 건조수축은 CSA와 $Na_2SiO_3$가 증가함에 따라 감소하였다. 그러나 압축강도는 CSA와 $Na_2SiO_3$가 증가함에 따라 증가하였다. 이러한 원인 중 하나는 CSA와 $Na_2SiO_3$가 GGBFS의 활성화를 촉진하였기 때문이다. 최고의 성능을 나타낸 배합은 CSA 5.0% + $Na_2SiO_3$ 4%를 혼합한 시험체이다.

알칼리 활성 슬래그 결합재의 미소수화열 분석 (Isothermal Conduction Calorimetry Analysis of Alkali Activated Slag Binder)

  • 최영철;조현우;오성우;문규돈
    • 한국건설순환자원학회논문집
    • /
    • 제3권3호
    • /
    • pp.237-243
    • /
    • 2015
  • 본 연구에서는 알칼리 활성화 슬래그 결합재의 반응성을 정량적으로 살펴보기 위해 미소수화열을 분석을 수행하였다. 알칼리 활성화 슬래그 결합재의 반응성 및 작업성 확보를 위해 다양한 알칼리 자극제의 종류 및 농도에 대해서 실험을 수행하였다. 알칼리 자극제 및 $SO_3$ 질량비를 변화하면서 미소수화열을 측정하였으며, 응결시간 제어를 위해 sodium tripolyphosphate ($Na_2P_3O_{10}$)와 hydrated sodium borate ($Na_2B_4O_710H_2O$)를 적용하였다. 그 결과, 알칼리 활성화 슬래그 결합재는 알칼리 활성에 의해 calcium silicate hydrate(C-S-H)를 촉진하는데 4~5% 농도의 알칼리가 필요한 것으로 나타났으며, $SO_3$ 함량이 높아질수록 누적 발열량이 작아지면서 전반적으로 발열이 지연되는 것으로 나타났다. 또한, 응결 지연제로서 hydrated sodium borate를 사용하였을 경우 발열을 억제하여 지연된 효과를 나타내며, 전체적인 누적 발열을 지연시키는 효과를 보이는 것을 확인할 수 있었다.

蟾津江 河口 干潟地 水質의 年間變化 (Seasonal Variations of Chemical Composition of the Estuary Water in Guang Yang Inlet from Mar. 1961 to Feb. 1962)

  • 원종훈
    • 대한화학회지
    • /
    • 제6권2호
    • /
    • pp.176-197
    • /
    • 1962
  • Seasonal variations of chemical constituents of estuarine water at a definite station of the tidal flat in Guang Yang inlet have been determined for two days a month. The range and mean of the annual variations are as follows:Tidal variations through a year are as follows:1. Although the tidal value of pH is almost constant during one tidal cycle, it raises abruptly 0.1-0.2 intervals of pH value during the first period of flood.2. The lower values of chlorinity, magnesium and calcium contents have been determined the nearer the slack after ebb, and slightly higher during the first period of flood tide than the last of ebb. The tidal change of calcium contents is more remarkable than of magnesium.3. The higher per cent saturation values of dissolved oxygen, sometimes higher than 100 per cent, re determined the nearer the slack after ebb.4. The total nitrogen contents, relatively poor, varies accidentally during one tidal cycle, whereas phosphate-P and silicate-Si are rich at the slack after ebb and increase proportionally to the mixing percentage of fresh water. The average values, 52.2 and 18.5 of Si/P and N/P are greater than of the normal.5. The acid soluble iron contents, lower in winter than in summer, is also varies accidentally during one tidal cycle and the magnitude of the variation is large.6. The chemical composition considered from the value of Ca/Cl or Mg/Cl of estuarine water varies according to the chlorinity even at the high chlorinity of 18-19%.

  • PDF

DEVELOPMENT OF SUSTAINABLE CEMENTLESS MORTARS

  • Keun-Hyeok Yang;Seol Lee;Sang-Ho Nam
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.1630-1636
    • /
    • 2009
  • Nine alkali-activated (AA) mortars were mixed and cured at water or air-dried conditions to explore the significance and limitation for the application of the combination of Ba and Ca ions as an alkali-activator. Ground granulated blast-furnace slag (GGBS) was used for source materials, and calcium hydroxide (Ca(OH)2) and barium hydroxide (Ba(OH)2) were employed as alkali activators. Test results clearly showed that the water curing condition was more effective than the air-dried curing condition for the formation of the denser calcium silicate hydrate (C-S-H) gels that had a higher molar Si/Ca ratio, resulting in a higher strength development. At the same time, the introduction of Ba(OH)2 led to the formation of 2CaO·Al2O3·SiO2·8H2O (C2ASH8) hydrates with higher molar Si/Al and Ca/Al ratios. Based on the test results, it can be concluded that the developed cementless mortars have highly effective performance and high potential as an eco-friendly sustainable building material.

  • PDF

저면공급한 규소에 의한 포인세티아의 광합성 능력 향상과 고온 스트레스 경감 (Silicon Supply through Subirrigation System Alleviates High Temperature Stress in Poinsettia by Enhancing Photosynthetic Rate)

  • 손문숙;박유경;;고충호;정병룡
    • 원예과학기술지
    • /
    • 제33권6호
    • /
    • pp.860-868
    • /
    • 2015
  • 본 연구는 고온 스트레스에서 규소가 분화용 포인세티아(Euphorbia pulcherrima Willd. 'Ichiban')의 내고온성과 생장에 미치는 영향을 조사하였다. 포인세티아를 삽목하여 발근된 삽목묘 중 균일한 개체를 선발하여 상토가 담긴 10cm 화분에 정식하였다. 세 가지 규산염($K_2SiO_3$, $Na_2SiO_3$, $CaSiO_3$)을 0(-Si), 또는 $50(+Si)mg{\cdot}L^{-1}$ Si농도로 순환식 저면베드에서 저면관수 또는 엽면살포 방식으로 약 2개월간 재배하였다. 포인세티아의 고온 스트레스에 대한 저항성을 알아보기 위하여 규소 처리 8주째에 식물생장상의 온도를 $35^{\circ}C$로 조절하여 18일동안 재배하였다. 모든 규산염처리에서 효소적 항산화 효소인 APX의 활성이 증가하였고, 비효소적 항산화 효소인 ELP의 활성은 감소하였다. 저면으로 공급한 $K_2SiO_3$$Na_2SiO_3$처리에서 대조구에 비해 Fv/Fm, 광합성율, 규소함량이 증가하였다. 따라서 규산염 처리가 대조구보다 고온 스트레스에 의해 발생하는 생장의 저해가 적었으며, 특히 저면으로 $K_2SiO_3$$Na_2SiO_3$를 공급하였을 때 가장 효과적이었다.