• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.3.1-3.1
• /
• 2011

Nanoengineered materials with advanced architectures are critical building blocks to modulate conventional material properties or amplify interface behavior for enhanced device performance. While several techniques exist for creating one dimensional heterostructures, electrospinning has emerged as a versatile, scalable, and cost-effective method to synthesize ultra-long nanofibers with controlled diameter (a few nanometres to several micrometres) and composition. In addition, different morphologies (e.g., nano-webs, beaded or smooth cylindrical fibers, and nanoribbons) and structures (e.g., core-.shell, hollow, branched, helical and porous structures) can be readily obtained by controlling different processing parameters. Although various nanofibers including polymers, carbon, ceramics and metals have been synthesized using direct electrospinning or through post-spinning processes, limited works were reported on the compound semiconducting nanofibers because of incompatibility of precursors. In this work, we combined electrospinning and galvanic displacement reaction to demonstrate cost-effective high throughput fabrication of ultra-long hollow semiconducting chalcogen and chalcogenide nanofibers. This procedure exploits electrospinning to fabricate ultra-long sacrificial nanofibers with controlled dimensions, morphology, and crystal structures, providing a large material database to tune electrode potentials, thereby imparting control over the composition and shape of the nanostructures that evolved during galvanic displacement reaction.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권4호
• /
• pp.139-142
• /
• 2002

Contactless electroreflectance measurements at room temperature were used to determine the bandgap energies of Zn$_{1-x}$ Mg$_{x}$O thin films grown by metal-organic vapor phase epitaxy. It is found that the bandgap energy increases monotonically with the Mg composition x, up to the highest composition measured (x=0.45). The obtained correlation between the bandgap energy and the Mg composition can be used in the analysis of the electronic structure of ZnO/Zn$_{1-x}$ Mg$_{x}$O heterostructures at room temperature.ature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.439-442
• /
• 2001

Chalcogenide glassy semiconductors(CGS) can be obtained by the melt quenching technique. We have investigated the thin film heterostructures : metal-chalcogenide glassy semiconductors, where metal is copper, and chalcogenide glassy semiconductors are glasses of the system As-Se. CU/CGS film heterostructure were produced in the vacuum evaporator by the method of vacuum thermal evaporation. Doped films are very sensitive to external actions, and this property allows developing supersensitive precision sensors of temperature, humidity, illumination, and etc. based on them. Cu/CGS film has shown that resistance strongly depend on the temperature. The ratio of resistance vs. temperature has shown over a 2 k$\Omega$/degree. The slop of temperature and resistance shows linear.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.727-730
• /
• 2002

Chalcogenide glassy semiconductors(CGS) can be obtained by the melt quenching technique. We have investigated the thin film heterostructures : metal-chalcogenide glassy semiconductors, where metal is copper, and chalcogenide glassy semiconductors are glasses of the system As-Se. Cu/CGS film heterostructure were produced in the vacuum evaporator by the method of vacuum thermal evaporation. Doped films are very sensitive to external actions, and this property allows developing supersensitive precision sensors of temperature, humidity, illumination, and etc. based on them. Cu/CGS film has shown that resistance strongly depend on the temperature. The slop of temperature and resistance shows linear.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권2호
• /
• pp.54-57
• /
• 2005

Photoreflectance (PR) has been measured to investigate the characterization of the Si$_{3}$N$_{4}$Al$_{0.21}$ Ga$_{0.79}$As/GaAs and Al$_{0.21}$Ga$_{0.79}$As/GaAs heterostructures. In the PR spectrum, the caplayer thickness was 170 nm and Si$_{3}$N$_{4}$ was utilized as the capping material. The C peak is confirmed as the carbon defect with residual impurity originating from the growth process. After annealing, in the presence of the Si$_{2}$N$_{4}$ cap layer, band gap energy was low shifted. This result indicates that the Si$_{3}$N$_{4}$ cap layer controlled evaporation of the As atom.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.289-290
• /
• 2006

We report a study of Zn(S)Se/GaAs heterojunction solar cells grown by molecular beam epitaxy (MBE). Zn(S)Se/GaAs heterostructures prepared under different conditions were characterized in-situ by reflection high-energy electron diffraction (RHEED). Structural and electrical properties were investigated with double crystal X-ray diffraction and current-voltage characteristics, respectively. The fabricated $n-ZnS_{0.07}Se_{0.93}/p-GaAs$ solar cell (SC #2) exhibited open circuit voltage($V_{oc}$) of 0.37 V, short circuit current($I_{sc}$) of $1.7{\times}10^{-2}$ mA, fill factor of 0.62 and conversion efficiency of 7.8 % under 38.5 $mW/cm^2$ illumination.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권5호
• /
• pp.214-216
• /
• 2005

Photoreflectance (PR) has been measured to investigate the characterization of the $Al_{0.20}Ga_{0.80}As$/GaAs heterostructures. In the PR spectrum, the 'C' peak is confirmed as the carbon defect with residual impurity originating from the growth process. After annealing, binding energy is relatively weak with As evaporation being done to increase Ga. Also obtained is the electric field value according to annealing temperature ($300{\sim}800^{\circ}C$).

• 전자통신동향분석
• /
• 제3권4호
• /
• pp.3-12
• /
• 1988

Epilayer growing process has been recognized as a key technology for successful GaAs based devices and integrations. These may include HEMT, multiple quantum well structures, band gap engineering, and quantum confinement heterostructures. The fabrication of epilayers in these devices must meet very stringent requirements in terms of crystallinity, composition, film thickness and interface quality. In particular, the quality of interfaces is getting more important because the film thickness, and flatness, roughness and stability at interface of ultrathin films cause critical effects on the device performance. This article reviews the current status of modern epitaxial techniques which have been developed in the last few years. First, the new techniques PLE, GI, MEE, TSL based on MBE technique will be reviewed and their technical importance will be stressed. Secondly, MOMBE, GSMBE, CBE which combine the advantages of MBE and MOCVD will also be discussed. Thirdly, the new sophisticated epitaxial technique, ALE, of which mechanism is totally different from others, will also be reviewed. Finally, areas which should be exploited more extensively to accomplish these techniques will be addressed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.457-460
• /
• 1998

Present paper is devoted to the brief analysis of the present state and the prospects for the future of technology of the high frequency devices and high speed integrated circuits based on the $A_{3}B_{5}$ semiconductor compounds, including the $A_{3}B_{5}$-heterostructures, in the republics of the former USSR. tunneling quantum well-structures were widely used.

• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.857-862
• /
• 2009

We model lattice-mismatched group III-V semiconductor $In_{x}Ga_{1-x}$ alloys with the three-parameter anharmonic Kirkwood-Keating potential, which includes realistic distortion effect by introducing anharmonicity. Although the potential parameters were determined based on optical properties of the binary parent alloys InAs and GaAs, simulated dielectric functions, reflectance, and Raman spectra of alloys agree excellently with experimental data for any arbitrary atomic composition. For a wide range of atomic composition, InAs- and GaAs-bond retain their respective properties of binary parent crystals despite lattice and charge mismatch. It implies that use of the anharmonic Kirkwood-Keating potential may provide an optimal model system to investigate diverse and unique optical properties of quantum dot heterostructures by circumventing potential parameter searches for particular local structures.