• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.215-231
• /
• 2023

This study classifies short front long back skirts from the Joseon Dynasty by style type, identifies their formative characteristics based on their external morphological properties and internal composition, and examines their correlation with Korean thought. A literature review and empirical research were conducted for this study. The style of short front long back skirts is classified as inverted "b"-shaped, lower lip, wavy, trapezoid with a raised center hem, or half-circle. As such, this skirt possesses the formative properties of imbalance, variability of shape, intentional three-dimensionality, and confluence. In other words, with an imbalance resulting from the difference in length between the front and back, these skirts are characterized by variability in shape created by intentional three-dimensionality expressed as intentional three-dimensional beauty, the confluence of planes and dimensions, as well as of materials and colors. These properties are correlated with Korean ways of viewing the world. This study contributes to the development of Korean designs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.476-482
• /
• 2006

In this paper, a multimode feed horn antenna is suggested for a high power microwave(HPM) antenna system. The proposed HPM feed horn antenna which is connected with a mode converter is located between source and reflector antenna. A multimode feed horn antenna which has reduced -25 dB beamwidth is designed and fabricated for miniaturization of reflector antenna because -25 dB beamwidth which is determined by considering spillover of feed horn antenna decides a size of reflector in case of HPM. As a result, feed system which uses the multimode feed horn antenna has high gain about 27 dBi and return loss is less than -22 dB at 10 GHz. The measured -25 dB beamwidths of the radiation pattern at vertical, horizontal-plane equal to $20.24^{\circ},\;28.92^{\circ}$ which is less than about $10^{\circ}$ beamwidth of conventional feed system. Thus the suggested feed hem antenna is suitable to feed horn for miniaturization of HPM antenna system.

• Journal of the Korean Society of Costume
• /
• v.64 no.3
• /
• pp.77-92
• /
• 2014

The purpose of this research is to examine the expression methods of Haute Couture designers' high value-added jacket designs, In order to achieve this, the positions and sizes of the design component items of tailored jackets designed by Haute Couture designers from the 1940s to the 1970s were analyzed. The results of the analysis are as follows. First, the silhouette changed while leading the contemporaneous fashions, and such changes could be confirmed by the width and length of the jacket's shoulder, chest, waist, and hem that determine the silhouette. Particularly, the length of the chest changed which signifies that the depth of the armhole was playing an important role in the production of high value-added jackets in relation to the sleeves and the fit of jackets. Second, the position and the size of the dart are the components that can express the fit of a jacket and the designer's creativity, The starting point position of the dart and the position passing by waist, and the position of the end of the dart were placed in the position beyond B.P. depending on the designer's creativity and techniques, deriving the changes of the silhouette and creating high value-added jackets. Third, the tailored collar, which was a three-dimensional component made up of the upper collar, gorge line, lapel, and break line, was an important component that could express high value-added jackets. Changes in the width and the height of the break line position of the sides of the neck were represented as changes in the neck size of the collar, and changes in the vertex locations of the upper collar corner-point, the gorge line (the corner-point of the lapel and V zone) were also represented as diverse tailored collar designs. And the differences in the width and the length of each component of the collar were related to each other and represented as changes in the slope and angle of the collar outline. Fourth, the changes in sleeve designs of the jacket were in such items as the width of the sleeve opening, the width of the sleeve hem, and the length of the sleeve, and were represented as diverse sleeve designs such as widened sleeve opening types, and straight line types.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.442-447
• /
• 1999

A curd yogurt was prepared by fermenting milk added with skim milk powder and purple sweet potato by culture of 5 types of lactic acid bacteria(Lactobacillus delbruekii sub. sp. lactis, Streptococcus lactis, acidity, number of viable cell, stability of purple sweet potato's pigment and keeping qualify. Among the organisms tested, the acid production and number of viable cell by the culture of L bulgaricus remarkably increased for the first 12 hem which showed 1.04${\times}$10$\^$9/ CFU/mL in number of viable cell and 4.22 In pH where as fermentation by the culture of B. bifidum was slow. After 36 hours of incubation which showed 3.3 ${\times}$ l0$\^$8/ CFU/mL in number of viable cell and 5.1 in pH. In stabilities of purple sweet potato anthocyanin pigment n fermentation, yogurt by B. bifidum was found to be most stable followed by Leuc. lactis, L. delbruekii sub. sp. lactis, L bulgaricus, but yogurt by St. lactis was not stable. When curd yogurt added with Purple sweet Potato was kept at 2∼3$^{\circ}C$ for 14 day, its keeping quality(pH, titratable acidity, number of viable cell) was relative good except product by L. bulgaricus was found to be decreased most of viable cell. After 2 weeks of keeping, pigment of yogurt was decreased by B. bifidum, stable by L. delbruekii sub. sp. lactis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.1000-1006
• /
• 2006

In this paper, the gain of the square hem antenna is enhanced with $3{\times}3$ latticed aperture. In order to get the uniform field distribution on the aperture, the different thicknesses of dielectric plates for the phase compensation are inserted into the center and the edge of the aperture respectively. The proposed horn antenna is designed at 12.5 GHz band, and then the analysis of the field distribution on the aperture is performed by using FDTD method. The radiation pattern is also calculated from the analysis. Based on the measured data, it is verified that the gain of a horn antenna with latticed aperture is 18 dBi and this is 2 dB gain enhancement compare with a normal horn antenna without latticed aperture.

• The Research Journal of the Costume Culture
• /
• v.22 no.4
• /
• pp.605-618
• /
• 2014

This study aims to compare the ease of men's slim pants patterns, and to analyze the fit and appearance through the 3D virtual garment system. The study selected four educational materials and one industrial pattern of slim pants for a total of five items. The CLO 3D Modelist program was utilized to carry out the appearance evaluation through virtual wearing and opacity, and a comparison was performed regarding the clothing pressure when the virtual model was standing and walking. The results of our comparison of the patternmaking for slim pants showed that pattern C pants had the greatest ease on the waist circumference, while B pants showed no ease. The C and E pants also had the most ease on the hip measurement. In the appearance evaluation, A pants received the most favorable results, followed by D, E, B, and C, in descending order. The clothing pressure appeared to be mainly red on the waist, crotch, and hem when standing in all pants, so the clothing pressure was high. While walking, the stress appeared to be different for the left and right parts of the body, and the most significant difference was observed on the thigh area.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.69-79
• /
• 2019

This study aims to seek knitting methods that can enhance the neck design of seamless knitwear and to find out how to improve the designs by comparing and analyzing the characteristics of the knitting methods used for v-neck pullovers. The investigator analyzed the characteristics of the knitting methods and assessed the wearing sensation by using six different pieces of clothing for the experiment. The results were analyzed based on a variance analysis (ANOVA). Among the items showing significant results, the Duncan-test was used for more intensive research. As a result, while using the basic pattern of knitting methods, Experiment Clothes A ended up binding on the back neckline, and not making the hem of back. Also, the neck was the widest. In the case of the special neck, Experimental Clothes B (1:1), which had the least number of the knitting course in relation to the knitting ratio, the bottom part of the back body had the most wrinkles. According to the result of wearing sensation, the front part, the side part, and the back part showed similar results (p<0.000) in all items. Specifically, the appearance of the Experiment Clothes A (normal) in both the front and rear aspects were evaluated as the best. In the case of the special neck, the Experimental Clothes F was ranked the highest, whereas the Experimental Clothes B (1:1) was ranked the lowest. Based on the results of the study, it seems possible to provide concrete and technical data for the planning of unique and productive designs. With regard to seamless knitwear neck designs, a comparative analysis of the knitting method of v-neck pullovers will be of practical use in the development and manufacturing of the product.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.113-125
• /
• 2012

This study, as one on the neck design of seamless knitwears, set out to make experimental clothes applying various knitting methods to the hem of round neck, seek the knitting methods of finishing touches on the ending part of round neck to enhance function and aesthetic appreciation through measuring tensile strength and assessing wearing sensation, and provide basic data that would be of practical help to developing the design of seamless knitwears and mass production in the national knit industry. The ending part of neck of the seamless knitwear is not only the last stage in making knitwear but also affects the function and appearance of the clothes. The investigator, thus made six different pieces of experimental clothes according to the finishing methods of knitting on the neck, then measured tensile strength and put them to the test by a group of experts for the assessment of wearing sensation. The results were analyzed based on variance analysis(ANOVA), and the items with similar results were put to the Duncan test for intergroup comparison. According to the analysis results of measuring tensile strength, Experimental Clothes B received the highest evaluation, Experimental Clothes E the lowest. Also Experimental Clothes B was ranked the highest in almost every evaluation criteria, whereas Experimental Clothes E was ranked the lowest in the assessment of wearing sensation.

• Journal of Veterinary Clinics
• /
• v.7 no.2
• /
• pp.511-515
• /
• 1990

Induction of twinning was attempted by transfer of two whole- or demi-embryos in Holstein cows and heifers. Cows were superovulated with follicle stimulating hormone(FSH) administered twice daily in intra-muscular injection. On day of 6.5 to 7 post-estrus, embryos were collected nonsurgically, Normal morulae and early balstocysts were obtained from superovulated cows. The embryos were hisected with a micro-blade made from a razor. Twenty seven pairs of half embryos were successfully produced and 23 pairs of half embryos were transferred to recipients( Group A). Twenty cows were treated with low unit of FSH (3mg${\times}$2,2mg${\times}$2 ; Group B1, 2mg${\times}$2, 1mg${\times}$2, 1mg${\times}$2 ; Group 32) to induce double or triple ovulations. The cows of Group B1 and B2 were Inseminated artificially(A1) at following estrus. Twenty four heifers were bred by A1 and received an additional embryo into the uterine horn contralateral to the corpus luteum(CL) 6 days later(Group C). One embryo was transferred into each uterine hem of 16 heifers 6 days after estrus(Group D). Fourteen heifers were received two embryos into the uterine horn ipsilateral to the CL at day 6 of estrous cycle(Group I). Pregnancy rates at 60 days in Group A, B1, B2, C, D and E were 34.8％, 70.0％, 60.0％, 66.7％, 62.5％ and 57.1％, respectively. Twinning rates were 8.7％, 20.0%, 10.0％, 16.7％, 18.7％ and 21.4％, respectively. The present experiments demonstrate that FSH treatment( Group 31) and ipsilateral transfer( Group I ) of two whole-embryos are more useful methods to produce twins than the others.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.369-375
• /
• 2011

Purpose: Many hemostatic agents and dressings have been tested with variable degree of success. Chitosan has a positive charge, it attracts red blood cells, which have a negative charge. Our goal is to test the efficacy of new developed chitosan-based hemostatic materials in providing durable hemostasis in a high-flow arterial wound model. Methods: We compared each group with SD rats motality tests and in vitro blood compatibility test by blood clotting index (BCI). We devided the SD rats into 6 groups (N =15) by type of hemostatic agents. A: 100% nonwoven chitosan (degree of the deacetylation: 90%). B: 50% N-acetylation on nonwoven of chitosan gel (degree of the deacetylation: 50%). C: 60% N-acetylation on nonwoven of chitosan ge (degree of the deacetylation: 40%)l. D: Cutanplast$^{(R)}$. E: HemCon$^{(R)}$ F: Gauze. In vivo test, a proximal arterial injury was created in unilateral femoral arteries of 90 anesthetized SD rats. Each materials was made same size and thickness then applied to the injury site for 3 minutes. In vitro test, we compared each group with BCI in human blood. Results: In vivo test, group A showed lower motality rate of 46% than any other groups, Group B and C showed lower motality rate of 60% than group D and E's motality rate of 66%. In vitro test, BCI of group A ($30.6{\pm}1.2$) and B ($29.3{\pm}1.0$) were showed nearly about group D ($29.1{\pm}1.8$) and E ($27.4{\pm}1.6$). Group C ($37.1{\pm}2.0$) showed higher BCI than group A and B, it means group C decreased blood clotting. Conclusion: In conclusion, this study suggests a newly developed chitosan-based hemostatic materials induced durable hemostasis and increased blood clotting, and are considered as effective biologic hemostatic agents.