• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.3
• /
• pp.43-47
• /
• 1988

Height micrometer is a kind of end standards. It consists of a stack of gage blocks which is capable of moving up and down by a micrometer head. Height micrometer requires calibration with very high accuracy because its resolution is generally 1 .mu. m and its accuracy is higher than few micro- meters. Conventionally, comparison with gage blocks is used to calibrate height micrometer, but it is less accurate and time consuming method. A height micrometer calibration system using a laser interferometer instead of gage blocks has been developed. The measuring range of the system is 300mm, and the accuracy is better than ${\pm}0.5{\mu}m$ A new method of maintaining the laser-beam alignment is described as well.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.676-679
• /
• 2006

Mangrove crowns were delineated using active sensor LIDAR (LIght Detection And Ranging) data by a crown delineating model developed in this study. LIDAR data were acquired from airborne survey by a helicopter for the estuary of Macouria in the northeast coast of French Guiana. The canopy height image was derived from LIDAR vector data by calculating the difference between ground and non-ground data. The mangrove site in the study area was classified to three sectors by the time of mangrove settlement; Mangrove 1986, 2002 and 2003. The estimated crown of Mangrove 1986 was reliable defined for their size, number and volume because of larger crown size and bigger variation of crown height. The tree crown size of Mangrove 2002 and 2003 by the model was overestimated and the number of trees was much underestimated. The estimated crown was not for single crown but a crown group due to homogenous crown height and spatial resolution of LIDAR data. However the canopy height image derived from LIDAR data provided three-dimensional information of mangroves.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.6
• /
• pp.649-661
• /
• 2008

The impact of the detailed surface data on regional meteorological fields in complex coastal area is studied using RAMS. Resolutions of topography and land use data are very important to numerical modeling, because high resolution data can reflect correct terrain height and detail characteristics of the surface. Especially, in complex coastal region such as Gwangyang area, southern area in Korean Peninsula, high resolution topography and land use data are indispensable for accurate modeling results. This study investigated the effect of resolutions of terrain data using SRTM with 3 second resolution topography and KLU with 1 second resolution land use data. Case HR was the experiment using high resolution data, whereas Case LR used low resolution data. In Case HR, computed surface temperature was higher than Case LR along the coastline and wind speed was $1{\sim}2m/s$ weaker than Case LR. Time series of temperature and wind speed indicated great agreement with the observation data. Moreover, Case HR indicated outstanding results on statistical analysis such as regression, root mean square error, index of agreement.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.621-626
• /
• 2006

Today's commercial high resolution satellite imagery such as IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Extraction of 3D building information from high resolution satellite imagery is one of the most active research topics. There have been many previous works to extract 3D information based on stereo analysis, including sensor modelling. Practically, it is not easy to obtain stereo high resolution satellite images. On single image performance, most studies applied the roof-bottom points or shadow length extracted manually to sensor models with DEM. It is not suitable to apply these algorithms for dense buildings. We aim to extract 3D building information from a single satellite image in a simple and practical way. To measure as many buildings as possible, in this paper, we suggested a new way to extract building height by triangular vector structure that consists of a building bottom point, its corresponding roof point and a shadow end point. The proposed method could increase the number of measurable building, and decrease the digitizing error and the computation efficiency.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.409-431
• /
• 2014

In this study, the characteristics in the simulation of high-resolution coastal weather, i.e. sea surface wind (SSW) and significant wave height (SWH), were studied in a southeastern coastal region of Korea using the WRF and SWAN models. This analyses was performed based on the effects of various input factors in the WRF and SWAN model during M-Case (moderate days with average 1.8 m SWH and $8.4ms^{-1}$ SSW) and R-Case (rough days with average 3.4 m SWH and $13.0ms^{-1}$ SSW) according to the strength of SSW and SWH. The effects of topography (TP), land cover (LC), and sea surface temperature (SST) for the simulation of SSW with the WRF model were somewhat high on v-component winds along the coastline and the adjacent sea of a more detailed grid simulation (333 m) during R-Case. The LC effect was apparent in all grid simulations during both cases regardless of the strength of SSW, whereas the TP effect had shown a difference (decrease or increase) of wind speed according to the strength of SSW (M-Case or R-Case). In addition, the effects of monthly mean currents (CR) and deepwater design waves (DW) for the simulation of SWH with the SWAN model predicted good agreement with observed SWH during R-Case compared to the M-Case. For example, the effects of CR and DW contributed to the increase of SWH during R-Case regardless of grid resolution, whereas the differences (decrease or increase) of SWH occurred according to each effect (CR or DW) during M-Case.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.5
• /
• pp.333-342
• /
• 2012

We studied the characteristics of spatial distribution of global wave height and carried out the modelsensitivity test by changing the input field, model resolution and physical factor (effective wind factor) since the spatial and temporal resolution in wind wave forecasting is one of most important factors. Comparisons among the different cases, and also between model, buoy and satellite data have been made. As a results of the wind-wave model run using the high resolution wind field, the bias of significant wave height showed the positive tendency and the Root-Mean Square Error(RMSE) was a bit decreased based on the comparison with buoy data. When the model resolution was changed to higher, the bias and RMSE was increased, and as the effective wind factor was smaller than default value(= 1.4) the bias and RMSE showed also decreasing pattern.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.182-189
• /
• 2004

On contraction of the muscles, marked changes in X-ray reflections are observed, suggesting that conformational changes of contractile molecules and the movement of myosin heads during muscle contraction. Time slice requires tension peak after the onset of stimulation and the height of tension peak depends on the number of twitch cycle. The muscles were stimulated by five successive stimuli at an interval of 80 ms started while the tension was still being exerted by the muscles. The intensity of $I_{11}$, $I_{10}$, $143{\AA}$ and $215{\AA}$ reflection measured with 5ms time resolution and is recorded in isometric tension. The peak height of $I_{11}$ and $143{\AA}$ intensity is changed after the onset of a stimulation $I_i$, and the length of twitch is shortened by successive twitches in the case of stimulation $T_i$. On the other hand, the peak height of In and $215{\AA}$ intensity starts to decrease at the 1st twitch and remains constant at low peak height without appreciable recovery during the contraction term. In the case of successive twitch stimulation, the myosin heads of muscle are once moved from their resting position and never returned to their initial position.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.409-412
• /
• 2006

Today's commercial high resolution satellite imagery such as IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Recognizing this potential use of high resolution satellite imagery, KARI is performing a project for developing Korea multipurpose satellite 3(KOMPSAT-3). Therefore, it is necessary to develop techniques for various GIS applications of KOMPSAT-3, using similar high resolution satellite imagery. As fundamental studies for this purpose, we focused on the extraction of 3D spatial information and the update of existing GIS data from QuickBird imagery. This paper examines the scheme for rectification of high resolution image, and suggests the convenient semi-automatic algorithm for extraction of 3D building information from a single image. The algorithm is based on triangular vector structure that consists of a building bottom point, its corresponding roof point and a shadow end point. The proposed method could increase the number of measurable building, and enhance the digitizing accuracy and the computation efficiency.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.14-16
• /
• 2004

Although there have been wide range of studies to characterize forest stands based upon spectral information of satellite image, it was not fully understood the texture information of forest stand using high resolution data. The objective of this study is to evaluate several texture measures for characterizing forest stand structure, such as species composition, diameter at breast height(DBH), stand density, and age. High resolution IKONOS satellite imagery data were acquired in August 200 lover the forested area near Ulsan, Korea. Primary forest types were plantation pine, mixed forest, and natural deciduous forest of stand age ranging from 10 to 50 years old. Several GLCM-based texture measures were compared with forest stand characteristics. In overall, a texture measure (contrast) calculated using red band were better to differentiate species and age group than other texture measures and near infrared bands.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.605-614
• /
• 2015

Drone imaging, which is more cost-effective and controllable compared to airborne LiDAR, requires a low-cost camera and is used for capturing color images. From the overlapped color images, we produced two high-resolution digital surface models over different test areas. After segmentation, we performed tree identification according to the method proposed by , and computed the tree height and the canopy crown size. Compared with the field measurements, the computed results for the tree height in test area 1 (coniferous trees) were found to be accurate, while the results in test area 2 (deciduous coniferous trees) were found to be underestimated. The RMSE of the tree height was 0.84 m, and the width of the canopy crown was 1.51 m in test area 1. Further, the RMSE of the tree height was 2.45 m, and the width of the canopy crown was 1.53 m in test area 2. The experiment results validated the use of drone images for the extraction of a tree structure.