• 분석과학
• /
• 제17권4호
• /
• pp.363-367
• /
• 2004

A simple and convenient digestion method was developed for the determination of heavy metal in polyurethane sample using only nitric acid in open system without heating. This digestion method had prevented loss of volatile elements of Hg and As and reduced the pretreatment time for the sample digestion. The detection limit is lowered over 10 times than that of microwave digestion method. Recoveries in polyurethane material were 108% for As, 96 ~ 99% for Hg, 102 ~ 103% for Cr, 98 ~ 102% for Pb, 86 ~ 90% for Cd, and 90 ~ 93% for Cu.

• 한국주조공학회지
• /
• 제2권2호
• /
• pp.10-17
• /
• 1982

This study has been carried out to determine the change of mechanical properties and microstructures by the heattreatment to relieve the residual stresses for gray cast irons. The results have been obtained from the experiment as follows; 1) The annealing above $600^{\circ}C$ for the stress relieving of gray cast iron decrease the tensile strength and hardness 2) The decrease reates of tensile strength and hardness of gray cast iron after annealing above $600^{\circ}C$ are increased with increasing the holding time. 3) The gray cast iron containing the elements of Mn, Cr has increased the heating temperature for the decrease of tensile strength and hardness. 4) The decrease of mechanical properties by annealing are assumed that the formation of ferrite takes placed from the decomposition of eutectoid cementite in the matrix.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.93-94
• /
• 2014

Recently, According to increase of power demand, it was increased a demand that switching power supply have characteristic of low-loss and high-efficiency. So increase of using device, the failure rate increases and service life problem arises. Even though normal circuit protection is applied in designing stage, it is often hard to identify the cause of malfunction in certain cases such as fatigued power supply due to over-running, malfunctions of main elements or over heating. This report will cover experimental results with the prototype we made, that monitors the efficiency of switching power supply and that protects a circuit when it drops below the standard value.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.9-12
• /
• 2005

The rapid thermal response (RTR) molding is a novel process developed to raise the temperature of mold surface rapidly to the polymer melt temperature prior to the injection stage and then cool rapidly to the ejection temperature. The resulting filling process is achieved inside a hot mold cavity by prohibiting formation of frozen layer so as to enable thin wall injection molding without filing difficulty. The present work covers flow simulation of thin wall injection molding using the RTR molding process. In order to take into account the effects of thermal boundary conditions of the RTR mold, coupled analysis with transient heat transfer simulation is suggested and compared with conventional isothermal analysis. The proposed coupled simulation approach based on solid elements provides reliable thin wall flow estimation fur both the conventional molding and the RTR molding processes

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.33-38
• /
• 2023

Spray cooling is a method of cooling high-temperature heating elements by spraying droplets. Recently, spray cooling has been proposed for use in next-generation nuclear reactors. When droplets are sprayed onto the outer wall of a heat exchanger tube, a film boiling occurs on the outer wall. Over time, the outer wall temperature decreases, and a liquid film forms on the outer wall, and the heat exchanger outer wall is subsequently cooled by the liquid film. In this case, the liquid film thickness has a great influence on the heat removal performance. In this study, an experimental study was conducted to measure the liquid film thickness distribution in a droplet spray environment. For this purpose, a method using the electrical conductivity of the liquid was adopted.

• 방사성폐기물학회지
• /
• 제6권3호
• /
• pp.171-178
• /
• 2008

중 저준위 방사성폐기물 유리화 실증시설의 고온필터(HTF)시스템에 금속필터를 도입하여 일련의 성능시험을 수행하였다. 고온필터시스템의 여과재는 총 19개의 필터 element로 구성되는데 필터로서 금속 재질별 특성을 알기 위해 316L, 904L, Inconel 600 등 3종의 element를 혼합하여 필터set를 구성하였다. 매 시험을 종료한 후에는 필터하우징에서 종류별로 필터 element를 꺼내어 육안으로 변화를 관찰하였다. 그 결과 일부 element 표면에서 어두운 색깔의 반점들이 관찰되었으며, 특히 AISI 316L 재질의 element에서 많은 반점들이 발견되었다. 이 반점들이 부식을 의미하는 것인지 확인하기 위해 두 가지 분석을 수행하였다. 첫째 재질별로 1개씩의 element를 절단하여 정상적인 곳과 반점이 있는 곳의 표면 및 단면을 SEM/EDS로 분석하였다. 그 결과 반점은 Na, S, Si 등 무기계 산화물이 집중적으로 침적되어 필터의 미세기공을 막고 있는 현상으로 밝혀졌으며, 이 침적물들은 폐기물 및 유리용탕으로 부터 휘발된 물질로 판단된다. 둘째, 재질별로 필터 element에 대해 ring tensile시험을 수행하였다. 그 결과 반점을 포함한 시험 필터 element의 인장강도 값이 규정값 이상으로 나타나서 필터에 부식이 없는 것으로 확인되었다. 앞서 두 가지 분석결과로 볼 때 시험한 금속필터 표면에 생성된 반점은 부식생성물이라기 보다는 필터 전단으로부터 유입된 무기산화물 필터기공을 막고 있는 현상으로 판단되며, 이 반점이 반점형태로 국부적 지점에만 나타나는 것은 시험 중단시기 필터에 응축된 수분과 관련이 있는 것으로 판단된다. 반점의 생성은 필터의 유효 여과면적이 줄어 결과적으로 필터에 걸리는 압력손실이 커지기 때문에 필터하우징의 상시보온을 통한 응축 방지가 필요할 것으로 판단된다. 아울러, 보다 장시간의 시험을 통해 필터 부식현상에 대한 검증 필요하다고 판단된다.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.711-716
• /
• 2012

Tungsten bronze structure $Sr_{1-x}Ba_xNb_2O_6$ (SBN) single crystals were grown primarily using the Czochralski method, in which several difficulties were encountered: striation formation and diameter control. Striation formation occurred mainly because of crystal rotation in an asymmetric thermal field and unsteady melt convection driven by thermal buoyancy forces. To optimize the growth conditions, bulk SBN crystals were grown in a furnace with resistance heating elements. The zone of $O_2$ atmosphere for crystal growth is 9.0 cm and the difference of temperature between the melt and the top is $70^{\circ}C$. According to the growth conditions of the rotation rate, grown SBN became either polycrystalline or composed of single crystals. In the case of as-grown $Sr_{1-x}Ba_xNb_2O_6$ (x = 0.4; 60SBN) single crystals, the color of the crystals was transparent yellowish and the growth axis was the c-axis. The facets of the crystals were of various shapes. The length and diameter of the single crystals was 50~70 mm and 5~10 mm, respectively. Tungsten bronze SBN growth is affected by the temperature profile and the atmosphere of the growing zone. The thermal expansion coefficients on heating and on cooling of the grown SBN single crystals were not matched. These coefficients were thought to influence the phase transition phenomena of SBN.

• 디지털콘텐츠학회 논문지
• /
• 제19권6호
• /
• pp.1213-1218
• /
• 2018

최근 비전분야에 소개된 Mask R-CNN은 객체 인스턴스 세분화를위한 개념적으로 간단하고 유연하며 일반적인 프레임 워크를 제시한다. 이 논문에서는 열적외선 카메라로부터 획득한 열감지영상에서 발열체인 인스턴스에 대해 발열부위의 세그멘테이션 마스크를 생성하는 동시에 이미지 내의 오브젝트 발열부분을 효율적으로 탐색하는 알고리즘을 제안한다. Mask R-CNN 기법은 바운딩 박스 인식을 위해 기존 브랜치와 병렬로 객체 마스크를 예측하기 위한 브랜치를 추가함으로써 Faster R-CNN을 확장한 알고리즘이다. Mask R-CNN은 훈련이 간단하고 빠르게 실행하는 고속 R-CNN에 추가된다. 더욱이, Mask R-CNN은 다른 작업으로 일반화하기 용이하다. 본 연구에서는 이 R-CNN기반 적외선 영상 검출알고리즘을 제안하여 RGB영상에서 구별할 수 없는 발열체를 탐지하였다. 실험결과 Mask R-CNN에서 변별하지 못하는 발열객체를 성공적으로 검출하였다.

• 대한심미치과학회지
• /
• 제25권2호
• /
• pp.79-87
• /
• 2016

당일수복 보철물 제작을 위해 디지털 프로세스 사용은 필수적이다. 이러한 디지털 프로세스는 구강스캔, 컴퓨터를 이용한 보철물을 디자인 과정(CAD)과 보철물을 가공하는 과정(CAM)을 포함한다. 지르코니아의 굴곡강도는 900Mpa로 리튬디실리케이트의 400MPa보다 더 단단하지만, 리튬디실리케이트를 이용한 보철물 기공시간이 지르코니아와 비교하여 더 짧기에 당일수복 보철물 제작시 리튬디실리케이트 사용이 선호되었다. 하지만, TZI C 와 LUXEN Enamel 와 같은 새로운 소재의 지르코니아가 출시되고, 새로운 소결방식이 개발되어 지르코니아 기공시간을 단축시킬수 있게 되었고, 높은 투명도의 풀지르코니아 크라운을 짧은 시간 안에 제작할 수 있게 되었다. 이러한 발전은 당일 풀지르코니아 보철수복을 현실로 이끌고 있다.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2552-2559
• /
• 2000

Most of ferrous b.c.c weld materials have martensitic transformation during rapid cooling after welding. It is well known that volume expansion due to the phase transformation could influence on the relaxation of welding residual stress. To apply this effect practically, it is necessary to establish a numerical model which is able to estimate the effect of phase transformation on residual stress relaxation quantitatively. For this purpose, the analysis is carried out in two regions, i.e., heating and cooling, because the variation of material properties following a phase transformation in cooling is different in comparison with the case in heating, even at the same temperature. The variation of material properties following phase transformation is considered by the adjustment of specific heat and thermal expansion coefficient, and the distribution of residual stress in analysis is compared with that of experiment by previous study. In this study, simplified numerical procedures considering phase transformation, which based on a commercial finite element package was established through comparing with the experimental data of residual stress distribution by other researcher. To consider the phase transformation effect on residual stress relaxation, the transition of mechanical and thermal property such as thermal expansion coefficient and specific heat capacity was found by try and error method in this analysis. In addition to, since the transformation temperature changes by the kind and control of alloying elements, the steel with many kinds of transformation temperature were selected and the effect of transformation on stress releasement was investigated by the numerical procedures considering phase transformation.