• Journal of the Korea Institute of Building Construction
• /
• v.18 no.3
• /
• pp.251-257
• /
• 2018

There are various quality deteriorations of concrete such as plastic, drying shrinkage due to abrupt moisture evaporation, slump loss and cold joint under hot weather condition. To protect from above deteriorations, several kinds of modified bubble sheets have been applied to secure heat insulation performance. But, there is not enough application cases of bubble sheets at job site under hot weather condition. The objective of the paper is to investigate the temperature profile and crack occurrence of the concrete covered with five different kinds of surface curing sheets, which is placed under hot weather condition. Single layer transparent bubble sheet, white colored bubble sheet, aluminum metalizing bubble sheet and PE film are adopted for surface curing sheets. Test results indicated that application of aluminum metalizing bubble sheet had most favorable effect on the reduction of on temperature rise and on the crack reduction of concrete. But due to larger reflection of light by aluminum, it brings about visual pollution to the workers. Hence, the application of white colored bubble sheet can be the most desirable alternative to protect the concrete from hot weather in the field.

• The Journal of Korean Physical Therapy
• /
• v.26 no.6
• /
• pp.442-448
• /
• 2014

Purpose: The objective of this study is to evaluate the effect of neuro-feedback training and transcutaneous electrical nerve stimulation (TENS) on stress, quantitative sensory threshold and pain in patients suffering from tension type headache. Methods: 22 participants who passed the preliminary evaluation were enrolled in the study and 11 participants were randomly assigned to each group. The control group (n=11) was subject to the TENS treatment of which was composed of a 20-minute session for 5 times a week during 4 weeks, and the experimental group (n=11) was subject to both neuro feedback training and TENS treatment for 10 minutes a day and 5 days a week during 4 weeks. The Perceived Stress Scale (PSS) was used to measure a level of stress and the quantitative sensory testing (QST) was used for the measurement of cold pain threshold (CPT) and heat pain threshold (HPT); A degree of pain was evaluated through the headache impact test-6 (HIT-6). Results: In comparision of all dependent variables between the control and subject groups, there were significant differences in stress, quantitative sensory threshold and pain after the treatment (p<0.05), and the experimental group showed significant differences in stress, CPT, HPT and pain (p<0.05) and the control group showed only a significant difference in HPT (p<0.05). Conclusion: Findings of this study demonstrate that the concomitant administration of the TENS treatment and neuro feedback training is effective on alleviation of stress, quantitative sensory threshold and pain in patients with tension type headache.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.675-681
• /
• 1994

[ $F_0$ ]-values of the canned tuna in cottonseed oil (CTCO) were investigated under different sterilizing conditions to optimize the energy consumption and microbiological safety. The $F_0$-values were measured using a microcomputer based technique. The exact cold point was not the volumetric center of the cans, and it was located in the center of meat mass in can which had ca. $6\%$ of head space. Location of the test cans in retort showed no remarkable influence on the $F_0$-values when the cans were jumble loaded. The process time before sterilization should be shortened as much as possible to prevent the contamination of microorganisms. Thermophilic spore forming bacteria found from raw and precooked tuna were Bacillus subtilis, Bacillus cereus and Bacillus pasteurii, and the most heat resistant was Bacillus subtilis. The rational $F_0$-value for the CTCO obtained from the preservation test was regarded as 6min.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.231-238
• /
• 2022

Purpose. This study aimed to investigate the effect of different veneering methods on the tensile bond strength between polyetherketoneketone (PEKK) and denture base resins. Materials and methods. A total of 80 PEKK T-shaped specimens were fabricated and the primer (Visio.link) was applied after airborne-particle abrasion with 110 ㎛ alumina oxide powder. According to the veneering method, the specimens were divided into four groups (n = 20) to be veneered with the gingival colored packable photopolymerized composite resin (SR Adoro); flowable photopolymerized composite resin, (Crea.lign); heat-polymerized resin (Vertex); and self-polymerized resin (ProBase Cold). Each group was divided into two subgroups (n = 10) according to the artificial thermal aging. After the tensile bond strength measurement via universal testing machine, the fracture sections of all specimens were observed. Two-way ANOVA and Tukey's HSD post hoc test were used for the statistical analysis (α = .05). Results. The results of the two-way ANOVA showed statistically significant differences in the tensile bond strength according to the veneering method and artificial thermal aging of denture base resins (P<.001). The highest tensile bond strength showed in the packable photopolymerized resin group before and after the artificial thermal aging. The lowest tensile bond strength showed in the heat-polymerized resin group. The mixed and adhesive fracture showed in all groups. Conclusion. The veneering method and artificial thermal aging can influence in the tensile bond strength between the resin and PEKK. The artificial thermal aging can reduce the tensile bond strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5877-5884
• /
• 2014

Recently, abnormally cold weather has been reported more frequently in winter due to the climate change and abnormal weather changes. On the other hand, the heating capacity of a railcar may be not enough to warm the cabin under severe cold climatic conditions, which is one of the reasons for the passengers' complaints about heating. In this study, the effects of ambient temperature and heater power on the cabin temperature was investigated to obtain the minimum ambient temperature for the tested railcar. The test railcar was placed in a large-climatic chamber, and various ambient temperature conditions were simulated. The effects of the heater output were investigated by monitoring the cabin temperature under a range of heater output conditions. The mean cabin temperature was $14.0^{\circ}C$, which was far lower than the required minimum temperature of $18^{\circ}C$, under a $-10^{\circ}C$ ambient temperature condition with the maximum heat power. When the ambient temperature was set to $0^{\circ}C$ and $10^{\circ}C$, the maximum achievable cabin temperature was $26.1^{\circ}C$ and $34.0^{\circ}C$. Through calculations using the interpolation method, the minimum ambient temperature to maintain an $18^{\circ}C$ cabin temperature was $-6.7^{\circ}C$ for this car. The vertical temperature difference was higher with a higher power output and higher ambient temperature. The maximum vertical temperature difference was higher than $10^{\circ}C$ in some cases. However, the horizontal temperature difference vs. low temperature (< $2^{\circ}C$) was independent of the power output and ambient temperature. As a result, it is very important to reduce the vertical temperature difference to achieve good heating performance.

• The Korean Nurse
• /
• v.33 no.5
• /
• pp.63-75
• /
• 1995

The need of oriental nursing role is recently increasing. The implication of this trend is enormous not only for the need of independent of independent oriental nursing intervention. Hence, this study was designed to describe the characteristics of oriental nursing activity and identify the meaning of nursing activity in oriental hospital. A total of 24 nurses were selected by convenience sampling from eight units at one oriental hospital. A total of 168 data were collected using minute-by-minute recording during nurse s work shift. The data were analyzed using nova and scheffe method as post-hoc test The results of this study are as follows; 1. the category of nursing activity in oriental hospital 74.4% of nursing activity was the patient-oriented nursing care. The nursing activity included others (18.28%), the function-oriented nursing care (7.07%), and staff-oriented care (0.2%). 29.1 % of the patient-oriented nursing care was the direct care, and 24. 5 % of the patient-oriented nursing care was the indirect care. There was a lack of patient education and the communication patient. 2. Nursing activity in oriental hospital by characteristics 1) Nursing activity by unit For patient-oriented nursing care, there was a statistically significant difference among 8 units. In the critical care unit, the patient-oriented nursing care was mostly performed. For function-oriented nursing care, there was statistically significant difference among 8 units. In the physical therapy unit, the function-oriented nursing care was mostly performed. 2) Nursing activity in oriental hospital For all kinds of nursing activity, there was a statistically significant difference between shifts. In night shift patient-oriented nursing care, function-oriented nursing care, and other kinds of nursing care was mostly performed. Patient-oriented nursing care included indirect care, treatment set management, and the breaktime. In day shift, staff-oriented nursing care was performed. 3) Nursing activity in oriental hospital For all kinds of nursing activity, there was not a statistically significant difference by day. The day has not impact on nursing activity. 3. the meaning of activity in oriental hospital The results of this study show that the patient-oriented care was vital check, input! output check, medication, bedsore prevention, nasogastric feeding, oral care, catheterization care, perinatal care, nursing care associated with acupuncture and moxacautery, observation (fever, sweating), heat and cold application communication with patent and family, and patient room management In conclusion, two issues associated with the findings of the research appeated to be involved in the difficulty of nursing activity in hospital. The first issue was the nursing care in oriental hospital provided by nurses who have a limited understading of the principles of oriental medicine. The second issue was the deficiency of systematic guideling for oriental nursing activity. The findings suggest the need to develop the systematic guideline for oriental nursing activity. The need of continuing education for nurses who work in the oriental hospital, and the need of nursing education including oriental nursing are critical.

• Journal of Korean Public Health Nursing
• /
• v.15 no.1
• /
• pp.27-41
• /
• 2001

The purpose of this study was to discern the level of satisfaction of postpartum care in hospitals. the level of importance of traditional postpartum care and the need for home health care for postpartum women. The study's design was to obtain data needed to develop a community-based postpartum care program and to improve the quality of nursing for postpartum care recipients. Data for the study was collected from 1 March to 31 June 2000 from 116 postpartum care recipients treated in Chung-Buk, Korea. Data analysis consisted of frequency, percentage, t-test, and ANOVA. using SPSS win program. The results the of analysis were as follows: 1) The level of satisfaction of postpartum care in the hospital (mean 1.31) was very low. The most laudable items of nursing care by category were: moderate satisfaction with 'perineal wound care' (2.04) and 'afterpain observation'(2.09). The overall level of satisfaction of postpartum care in the hospital. however, was very low. 2) Among other items of postpartum care in the hospital, 'postpartum exercise' $(25.9\%)$. 'assessment and support for postpartum depression' $(25.9\%)$, 'operation wound care for women who underwent Caesarean sections' $(24.5\%)$. and 'contraception and family planning' $(20.4\%)$ showed a need for home health care for postpartum care recipients above $20\%$. 3) The level of importance of traditional postpartum care (Sanhujori) was relatively high (mean 2.72). The importance of Sanhujori by category was as followed: 'the fourth principle: protecting the body from harmful strains' was the highest (2.88), 'the third principle: eating well', 'the first principle: invigorating the body by augmenting heat and avoiding cold', 'the second principle: resting without working', 'the fifth principle: keeping clean' and 'the sixth principle: handling with the whole heart' showed 2.85, 2.80, 2.70, 2.51 and 2.46 respectively. 4) The need for home health care with Sanhujori was very low. 5) The relationship between demographic factors and the level of satisfaction with postpartum care in the hospital was as follows: the satisfaction levels were significantly different among' delivery frequency' and 'health status' alteration after delivery'. 6) The relationship between demographic factors and the importance of the Sanhujori category was as follows: There were no significant differences in the level of importance of the first and the forth principle of Sanhujori. The level of importance of the second principle of Sanhujori was significantly different among 'income' and 'family type'. The level of importance of the third principle of Sanhujori was significantly different among 'having a boy'. The level of importance of the fifth principle of Sanhujori was significantly different among 'income' and 'feeding type'. The level of importance of the sixth principle of Sanhujori was significantly different among 'education background' and 'feeding type'. In conclusion. the findings of this study illustrate the nursing needs of postpartum care recipients. It provides a challenge to caregivers in the healthcare industry to develop a continuous postpartum care program and integrative postpartum care system that embodies the oriental and western paradigm for the promotion of women's health.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.124-132
• /
• 2016

In order to estimate the effect of flow distributors connected to an upper nozzle of CMT(Core Makeup Tank) on the thermal-hydraulic characteristics in the tank, a simplified 2 inch Small Break Loss of Coolant Accident(SBLOCA) was simulated by skipping the decay power and Passive Residual Heat Removal System(PRHRS) actuation. The CMT is a part of safety injection systems in the SMART (System Integrated Modular Advanced Reactor). Each test was performed with reliable boundary conditions. It means that the pressure distribution is provided with repeatable and reproducible behavior during SBLOCA simulations. The maximum flow rates were achieved at around 350 seconds after the initial opening of the isolation valve installed in CMT. After a short period of decreased flow rate, it attained a steady injection flow rate after about 1,250 seconds. This unstable injection period of the CMT coolant is due to the condensation of steam injected into the upper part of CMT. The steady injection flow rate was about 8.4% higher with B-type distributor than that with A-type distributor. The gravity injection during hot condition tests were in good agreement with that during cold condition tests except for the early stages.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.591-597
• /
• 2012

For heat exchanger applications, 2-ply clad materials were fabricated by rolling of aluminum (Al) and mild steel sheets. Effects of annealing temperature on interface properties, especially on inter-layer formation and softening of strain hardened mild-steel, for Al/mild steel clad materials, were investigated. To obtain optimum annealing conditions for the Al/mild steel clad materials, annealing temperature was varied from room temperature to $600^{\circ}C$. At the annealing temperature about $450^{\circ}C$, an inter-layer was formed in an island-shape at the interface of the Al/mild steel clad materials; this island expanded along the interface at higher temperature. By analyzing the X-ray diffraction (XRD) peaks and the energy dispersive X-ray spectroscopy (EDX) results, it was determined that the exact chemical stoichiometry for the inter-layer was that of $Fe_2Al_5$. In some samples, an X-layer was formed between the Al and the inter-layer of $Fe_2Al_5$ at high annealing temperature of around $550^{\circ}C$. The existence of an X-layer enhanced the growth of the inter-layer, which resulted in the delamination of the Al/mild-steel clad materials. Hardness tests were also performed to examine the influence of the annealing temperature on the cold deformability, which is a very important property for the deep drawing process of clad materials. The hardness value of mild steel gradually decreased with increasing annealing temperature. Especially, the value of hardness sharply decreased in the temperature range between $525^{\circ}C$ and $550^{\circ}C$. From these results, we can conclude that the optimum annealing temperature is around $550^{\circ}C$ under condition of there being no X-layer creation.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.89-96
• /
• 2018

In this paper, we proposed a parametric estimation method for estimating H/W cost by using the development data of professional service robot in Korea. In addition, we derived the factors and weights that we can estimate the costs depending on the application environmental conditions of the robot. For the analysis, we developed the equation of professional service robot cost estimation using parametric method. We also derived the adjustment factors and following weights through FGI and Delphi for environmental conditions. We have developed a cost estimation equation that reflects the weight, volume, and manufacturing difficulty, and can derive a relational equation that reflects the environmental factors(dust/water, heat/cold, safety, test, technology innovation). This provides an objective basis for estimating the cost of professional service robots and will lead to ongoing research for estimating the H/W development cost of professional service robots. In the future, we will increase reliability by collecting abundant data, and will strengthen models through finding functional factors.